Skip to the content
4 layers73 × 61 mmDrethafordIntroP, the printed circuit board in 3D

Intro Project for Mechatronics Club SDSU

Size
73 × 61 mm
Copper layers
4
Thickness
1.6 mm
Parts
21
Nets
44
Pads
122
Tracks, vias
276, 13
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
17 Sep 2026
Updated
17 Sep 2026

Overview

DrethafordIntroP is an open-source printed circuit board by Devin-Rethaford, from the Devin-Rethaford/STM32Intro.Project repository on GitHub. It is a 4-layer board of 73 × 61 mm with 21 parts on 44 nets, routed with 276 tracks and 13 vias.

Its parts include 7 capacitors, 3 resistors, 3 connectors, 2 diodes and 1 IC. It belongs with the STM32 boards of this library.

README

README.md

Introduction project for mechatronics club SDSU. My first PCB design and familiarization with KiCad software. Small learning curve for this project especially with understanding power and GND planes.

Parts

21
QtyValueFootprintReferences
4100nFCapacitor_SMD:C_0805_2012MetricC1, C2, C3, C4
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
230pFCapacitor_SMD:C_0805_2012MetricC6, C7
2510RResistor_SMD:R_0805_2012MetricR2, R3
2Conn_01x20Connector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ2, J3
1100nCapacitor_SMD:C_0805_2012MetricC5
110kResistor_SMD:R_0805_2012MetricR1
116MHzCrystal:Crystal_HC49-4H_VerticalY1
1On-Board LEDLED_SMD:LED_0805_2012MetricD2
1PWR LEDLED_SMD:LED_0805_2012MetricD1
1STM32F103CBTxPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1SWDConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ1

Similar boards

  • 4 layers26.7 × 21.9 mmBuck Converter, the printed circuit board in 3D

    Buck Converter

    murexrobotics/electrical

    Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

    21 parts192MIT
  • 4 layers26 × 30 mmDay 01 Wi Fi Halow, the printed circuit board in 3D

    Day 01 Wi Fi Halow

    i2cjak/Framework_Expansion_Cards

    In which i2cjak creates a new expansion card design every day until he is given a NICE Framework laptop

    21 parts95CERN-OHL-P-2.0
  • 4 layers20 × 48.5 mmMidea WiFi Dongle, the printed circuit board in 3D

    Midea WiFi Dongle

    reneklootwijk/mideahvac-dongle

    This repository contains the hardware design of a WiFi dongle for Midea-like airconditioners and humidifiers. Midea provides a WiFi dongle (SK102/SK103), either as optional feature or built-in, to control the appliances…

    21 parts75
  • 4 layers80 × 80 mmZoxnoxiouscard, the printed circuit board in 3D

    Zoxnoxiouscard

    brer-rabbit/zoxnoxious

    Analog synth / software interface

    21 parts68GPL-3.0
  • 4 layers90 × 75 mmCM4 2 Backup, the printed circuit board in 3D

    CM4 2 Backup

    olvint/CM4-NAS-MiniPCIE

    Raspberry Pi CM4 based NAS solution board

    21 parts51
  • 4 layersTiav3, the printed circuit board in 3D

    Tiav3

    OpenSiPM/sipm-bias-control

    Single channel silicon photomultipliers for high-speed fluorescence imaging

    21 parts44
  • 4 layers88.9 × 20.3 mmGW4194-SOJ DC, the printed circuit board in 3D

    GW4194-SOJ DC

    garrettsworkshop/RAMSIMM-30

    4 MB and 16 MB 30-pin DRAM SIMMs

    21 parts34

Questions

How big is the DrethafordIntroP PCB?

It measures 73 × 61 mm and has 4 copper layers, 1.6 mm thick.

What parts does the DrethafordIntroP use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DrethafordIntroP KiCad files?

From the Devin-Rethaford/STM32Intro.Project repository on GitHub, at the commit this page was made from: the board is DrethafordIntroP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the DrethafordIntroP design in my own project?

Its repository states no licence, so its author keeps all rights: ask Devin-Rethaford before reusing the design.