Skip to the content
2 layers158.5 × 95 mmLab3-design pcb, the printed circuit board in 3D

Lab3-design pcb

Deliciozy/hwsw-lab3
Size
158.5 × 95 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
10
Pads
43
Tracks, vias
260, 26
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jan 2026
Updated
30 Jan 2026

Overview

Lab3-design pcb is an open-source printed circuit board by Deliciozy, from the Deliciozy/hwsw-lab3 repository on GitHub. It is a 2-layer board of 158.5 × 95 mm with 13 parts on 10 nets, routed with 260 tracks and 26 vias.

It is built around the MIC5219-3.3YM5. Its parts include 5 capacitors, 4 resistors, 2 ICs, 1 diode and 1 connector.

Main components

1

Parts

13
QtyValueFootprintReferences
31uFCapacitor_SMD:C_0402_1005MetricC1, C2, C3
24.7kResistor_SMD:R_0402_1005MetricR3, R4
10.01uFCapacitor_SMD:C_0402_1005MetricC5
10.1uFCapacitor_SMD:C_0402_1005MetricC4
11.5kResistor_SMD:R_0402_1005MetricR2
110kResistor_SMD:R_0402_1005MetricR1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_VerticalJ1
1LEDLED_SMD:LED_0603_1608MetricD1
1MIC5219-3.3YM5Package_TO_SOT_SMD:SOT-23-5U1
1VL53L4CXV0DH_1VL53L4CXV0DH_1:XCDR_VL53L4CXV0DH_1U2

Similar boards

  • 2 layers80 × 50 mmThermal Camera, the printed circuit board in 3D

    Thermal Camera

    Circuit-Digest/MLX90640-Thermal-Camera

    An Open Source Thermal Imaging IR camera that you can build yourserlf

    66 parts94
  • 2 layers67.8 × 55 mmVFD Watch, the printed circuit board in 3D

    VFD Watch

    Pakue95/VFD_Watch

    Portable VFD based on IVL2-7/5 and ESP32

    67 parts41
  • 2 layers166 × 105 mmPico synth sandbox, the printed circuit board in 3D

    Pico synth sandbox

    relic-se/PicoSynth_Sandbox-hardware

    Raspberry Pi Pico digital synthesizer board with I2S stereo audio i/o, MEMS microphones, MIDI i/o, a capacitive keybed, 1602 display, 2 rotary encoders, and LiPo battery. Designed for use with CircuitPython and synthio.

    184 parts26GPL-3.0
  • 2 layers81 × 49 mmMmStep, the printed circuit board in 3D

    MmStep

    luni64/mmStep

    Stepper driver board for the sparkfun MicroMod system. Compatible to DRV8825, A4988 etc.

    39 parts14MIT
  • 2 layers49 × 75 mmDuoDrive, the printed circuit board in 3D

    DuoDrive

    ManhTi3012/DuoDrive

    Duo closed-loop brushed motor driver

    115 parts10
  • 2 layers23 × 19 mmOpenRCDG, the printed circuit board in 3D

    OpenRCDG

    dot1nt/openRCDG

    An Arduino based rc drift gyro

    28 parts8GPL-3.0
  • 2 layers17 × 21.5 mmFlockOne, the printed circuit board in 3D

    FlockOne

    RavenLRS/Flock

    Flock is an inter-craft communication system intended mainly for radio controlled vehicles

    14 parts8
  • 4 layers91 × 22 mmLC PAMV4b, the printed circuit board in 3D

    LC PAMV4b

    WMXZ-EU/LC-MARE

    low-cost marine acoustic recorder

    74 parts8MIT

Questions

How big is the Lab3-design pcb PCB?

It measures 158.5 × 95 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Lab3-design pcb use?

13 parts, built around the MIC5219-3.3YM5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lab3-design pcb KiCad files?

From the Deliciozy/hwsw-lab3 repository on GitHub, at the commit this page was made from: the board is lab3-all/Lab3-design pcb.kicad_pcb and its schematic lab3-all/Lab3-design pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lab3-design pcb design in my own project?

Its repository states no licence, so its author keeps all rights: ask Deliciozy before reusing the design.