
LPT Converter
Deftaudio/Casio-FZ-1
Multiple project for Casio FZ-1 / FZ-10m / FZ-20m upgrades

Multiple project for Casio FZ-1 / FZ-10m / FZ-20m upgrades
Pico FZ1 OLED PCB is an open-source printed circuit board by Deftaudio, from the Deftaudio/Casio-FZ-1 repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 71.1 × 120 mm with 66 parts on 60 nets, routed with 166 tracks and 2 vias.
Its parts include 14 resistors, 4 connectors and 1 IC. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
This repository is the collection of upgrades for an amazing Casio FZ-series of samplers. Some of those are also applicable for VZ-series.
FZDUMP2026 data transfer software for windows
1MB FZ-1 Memory Upgrade daughter card memory expansion for FZ-1
Pico OLED Upgrade for FZ-1, FZ-10m, FZ-20m, VZ-1, VZ-10m easy OLED upgrade for the entire Casio family
FZ-1 OLED Upgrade by Dmitrins the original design, keep here for historic reason
Flashfloppy Floppy Emulator configuration files for FlashFloppy and HxC
It's the new version of the original FZDUMP app for DOS that allowed data transfer between FZ-1 and PC. It has been completely reworked in 2026 (30 years after the original code) to run on "modern" Windows - anything from and including Windows 98 SE.
It was purposely designed to use the parallel port, not rely on any microcontroller, and just initiate a transfer using a user space library to interface with LPT port. This required specific tricks in the code, since the original code used DOS interrupts.
The main motivation is to keep it legacy looking. It has a built in browser to easily manage large sound library.
FZDUMP2026 remains open source, free of charge of all. You're highly encouraged to submit your improvements using this Github repository.
Deftaudio offers the complete Thin PC setups with all original and FZDUMP2026 software pre-loaded. Check the store.
Below is the LPT converter which is designed to adopt Casio FZ-series pinout and use with standard DB25 Male-Female extension cables to connect to PC.
LPT converter design files are available to all. You can make your own or order PCB or assembled adapter at Deftaudio store.
Developed by Deftaudio.
Memory Expansion is designed to add an extra 1MB of sample memory for Casio FZ-1 (only keyboard version has an expansion slot). It replicates the1987 circuitry by leveraging off the shelf 256Kx1 DRAM chips which are easily obtainable.
Beginner soldering skills are required. The kit consists of thru hole parts only, easy to solder. It includes quality IC sockets (round pin hole ) for all components for easy installation or replacement. Assembly manual is located here.
Plug and play. Doesn't require opening FZ-1. The memory expansion slot is located on the back of the instrument.
Works with any 256Kx1 DRAM (80ns or better) such as MB81256-80, HY53C256LS-80, KM41C256P-7, MN41256A-08 and many other equivalents.
More info on the Product page.
This is the recent development by Dreambrother7, is inspired by the original OLED by Dmitrins, but uses RPi Pico/Pico2 instead. This allowed to reduce the cost of the project, by minimizing the BOM and using easily available SSD1309 OLED model.
Deftaudio designed several PCBs for this project. The base PCB assembly hosts Pico and OLED screen. It connects to the adapter board that goes into flex cable slot on Casio. The base PCB has snap off regions to be mounted in FZ-1, FZ-10m/FZ-20m or VZ-10m.
The adapter board is unique for FZ-1 or FZ-10m/FZ-20m/VZ-10m due to a different connector type which is used on rack family. It connects with 10 pin ribbon cable (2.00mm pitch).
You can download the lastest PCB design files and Gerber from this repository while Dreambrother7 hosts the latest tested version and firmware.
You can purchase PCBs at Deftaudio store.
Developed by Dreambrother7 and Deftaudio.
This is a copy of the open source design files by Dmitrins who shared it on Yamahamusician.
Deftaudio doesn't sell this design. Keep it here just to preserve it.
Just a set of configuration files and test images to get Casio FZ-1 running with Flashfloppy.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | mylib:MountingHole_3mm | , , , , , , , , , | |
| 7 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8, R10, R12, R14 |
| 7 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7, R9, R11, R13 |
| 2 | 2x5 Header | Connector_PinHeader_2.00mm:PinHeader_2x05_P2.00mm_Vertical | J2, J4 |
| 1 | Pico | Module:RaspberryPi_Pico_Common_Unspecified | U1 |
| 1 | SSD1309 OLED | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | SSD1309 Vert OLED | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
The 29 most common of 66 parts.

Deftaudio/Casio-FZ-1
Multiple project for Casio FZ-1 / FZ-10m / FZ-20m upgrades

Deftaudio/Casio-FZ-1
Multiple project for Casio FZ-1 / FZ-10m / FZ-20m upgrades

Deftaudio/Casio-FZ-1
Multiple project for Casio FZ-1 / FZ-10m / FZ-20m upgrades

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.

mmccoyd/hillside
Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc



Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
It measures 71.1 × 120 mm and has 2 copper layers, 1.6 mm thick.
66 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Deftaudio/Casio-FZ-1 repository on GitHub, at the commit this page was made from: the board is Pico OLED by Dreambrother7/Baseboard/Pico_FZ1_OLED_PCB.kicad_pcb and its schematic FZDUMP2026/LPT Converter/LPT Converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).