
Raven
agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack

PCB for USB Audio DAC using STM32F411/401 IC and PCM5102A
Stm32 dac pcb is an open-source printed circuit board by DeflateAwning, from the DeflateAwning/STM32F411_USB_AUDIO_DAC_PCB repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 63.1 × 21.8 mm with 52 parts on 60 nets, routed with 540 tracks and 66 vias.
It is built around the PCM5102APW. Its parts include 26 capacitors, 9 resistors, 4 ICs, 4 connectors and 2 switches. It belongs with the audio and music boards and the STM32 boards of this library.
PCB for USB Audio DAC using STM32F411/401 IC and PCM5102A
This is a simple PCB for the perfboard-and-firmware project created by har-in-air at https://github.com/har-in-air/STM32F411_USB_AUDIO_DAC.
This project aims to create a very small, high-quality USB-C DAC, using KiCAD to make the PCB and OpenSCAD to make a simple 3D-printable enclosure. The firmware from the aforementioned project will be used as-is.
Soldering this project may be difficult; take a look at the perfboard option using the STM32 Black Pill and PCM5102A module if soldering small SMD components is outside of your capabilities.
0603 (Metric 1608) parts are used for this project. 1206 (Metric 3216) 10uF capacitors (tantalum) are used.
This hardware project (PCB and enclosure) is licensed under the CERN Open Hardware Licence Version 2 - Permissive licence:
A permissive license for hardware designs, with conditions only requiring preservation of notices. Contributors provide an express grant of patent rights. Licensed works, modifications, and larger works may be distributed under different terms and without sources.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C8, C10, C11, C12, C13, C14, C16, C21, C25 |
| 8 | 10u | 0_project_fp_lib:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder_Polar | C1, C2, C3, C4, C15, C17, C23, C26 |
| 5 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C19, C20, C22, C24 |
| 3 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3 |
| 2 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5 |
| 2 | 12p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R9 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 2 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U2 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 2 | SW_Push | 0_project_fp_lib:PushButtonSMD_2.93x3.9 | SW1, SW2 |
| 1 | 100u | 0_project_fp_lib:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder_Polar | C18 |
| 1 | 25MHz, 9pF | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y1 |
| 1 | 5k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | AudioJack4 | 0_project_fp_lib:3.5mmHeadphoneTRRS_THT | J4 |
| 1 | Conn_01x03 | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J1 |
| 1 | Conn_01x08 | 0_project_fp_lib:SOIC_clipProgSmall | J5 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | PCM5102A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 1 | STM32F411CEUx | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |

agranlund/raven
Homemade MC68060 + DSP56303 Atari-compatible computer. Hardware, firmware, and software stack




xiphonics/picoTracker-pcb
Buy the official kit at xiphonics store # Trademark Notice


martinroger/ipodesp32
An iPod emulator for 2006-2013 BMW Mini Coopers that need Bluetooth
It measures 63.1 × 21.8 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the PCM5102APW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DeflateAwning/STM32F411_USB_AUDIO_DAC_PCB repository on GitHub, at the commit this page was made from: the board is stm32_dac_pcb/stm32_dac_pcb.kicad_pcb and its schematic stm32_dac_pcb/dac_sheet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).