
DMH Multiverter PCB Conn
DeMarco/DMH-Multiverter
Mult and Attenuvater module in Kosmo format

Mult and Attenuvater module in Kosmo format
DMH Multiverter PCB is an open-source printed circuit board by DeMarco, from the DeMarco/DMH-Multiverter repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 32 × 75 mm with 24 parts on 18 nets, routed with 106 tracks and 0 vias.
It is built around the TL072. Its parts include 6 capacitors, 5 resistors, 5 connectors, 3 diodes and 1 IC.
Mult and Attenuvater module in Kosmo format
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C3, C4, C5, C6 |
| 3 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R5 |
| 2 | 100k | SynthStuff:Potentiometer_TT_P110KH1 | RV1, RV2 |
| 2 | 33k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 50k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV3, RV4 |
| 2 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J50, J60 |
| 1 | BackBone_Connector_6pin | SynthStuff:IDC-Header_2x03_P2.54mm_Vertical_BackBone | J200 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J0 |
| 1 | IDC_02x05 | SynthStuff:IDC-Header_2x05_P2.54mm_Vertical_Eurorack | J100 |
| 1 | SB140+ | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | SB140- | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | ZPD5V1 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D3 |

DeMarco/DMH-Multiverter
Mult and Attenuvater module in Kosmo format

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

plinkysynth/plinky_public
a public release of the plinky sw and hw



matthewcieplak/super-sixteen
Code and schematics for the Super Sixteen Eurorack sequencer

mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules

StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
It measures 32 × 75 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the DeMarco/DMH-Multiverter repository on GitHub, at the commit this page was made from: the board is DMH_Multiverter_PCB/DMH_Multiverter_PCB.kicad_pcb and its schematic DMH_Multiverter_PANEL/DMH_Multiverter_PANEL.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).