Skip to the content
2 layers49.8 × 22 mmWifiLightsController, the printed circuit board in 3D

Control a strip of several WS2812B with an ubicuous ESP8266 module

Size
49.8 × 22 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
16
Pads
47
Tracks, vias
139, 1
Pours
8
Routed
Yes
KiCad
KiCad 4
Created
16 Nov 2015
Updated
16 Nov 2015

Overview

WifiLightsController is an open-source printed circuit board by David-Estevez, from the David-Estevez/WifiLightsController repository on GitHub. It is a 2-layer board of 49.8 × 22 mm with 14 parts on 16 nets, routed with 139 tracks and 1 via.

It is built around the LD1117S33CTR-HXY. Its parts include 4 connectors, 2 capacitors, 2 switches and 1 IC. It belongs with the ESP8266 boards of this library.

Main components

1

README

README.md

WifiLightsController

Control a strip of several WS2812B with an ubicuous ESP8266 module

Author: DEF

Parts

14
QtyValueFootprintReferences
2def-footprints:Mechanical_Drill_3mmMechanical_drill_3mm, Mechanical_drill_3mm
1CCapacitors_SMD:C_0805_HandSolderingC1
1CONN_01X02Pin_Headers:Pin_Header_Angled_1x02P4
1CONN_01X03Pin_Headers:Pin_Header_Angled_1x03P3
1CONN_01X04Pin_Headers:Pin_Header_Straight_1x04P2
1CONN_01X04Pin_Headers:Pin_Header_Angled_1x04P1
1CPdef-footprints:Package_1206_polC2
1ESP8266-03def-footprints:Board_ESP8266_03BOARD1
1LD1117S33CTRdef-footprints:Package_SOT-223-3U1
1LOGOdef-footprints:Logo_OSHW_3x3cmG***
1OSHW-logodef-footprints:Logo_OSHW_smallG***
1PASSIVES_Switch_DPDTdef-footprints:Switches_Switch_DPDT_SMD_Seeedstudio_311030005SW2
1SW_PUSHdef-footprints:Switches_Push_Switch_SMD_Seeedstudio_DHT-1163SSW1

Similar boards

  • 2 layers77 × 100 mmBeamer1, the printed circuit board in 3D

    Beamer1

    shufps/diy-projector-clock

    DIY Projector Clock

    283 parts172
  • 4 layers72.4 × 95.3 mmDingoPDM, the printed circuit board in 3D

    DingoPDM

    corygrant/dingoPDM

    Hardware - dingoPDM is an open source, affordable automotive PDM (Power Distribution Module). Pre-assembled and tested units are available or the design can be used to build a DIY version.

    156 parts128MIT
  • 4 layers43.4 × 25.4 mmR820t2 breakout, the printed circuit board in 3D

    R820t2 breakout

    emeb/r820t2

    Breakout PCB design and STM32F0 firmware for the Rafael R820T2 tuner chip

    83 parts85
  • 4 layers40 × 40 mmCANBoard, the printed circuit board in 3D

    CANBoard

    corygrant/CANBoard

    Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.

    83 parts53MIT
  • 2 layers19 × 106 mmPetRockMain1, the printed circuit board in 3D

    PetRockMain1

    jsenzel1/petrock

    Eurorack components and footprints for KiCad.

    117 parts48
  • 2 layers74.8 × 84.7 mm4chord midi, the printed circuit board in 3D

    4chord midi

    sgreg/4chord-midi

    The 4chord USB MIDI Keyboard

    63 parts36
  • 2 layers138.8 × 55 mmMuxPi, the printed circuit board in 3D

    MuxPi

    SamsungSLAV/muxpi

    MuxPi is an open hardware and open software board which was designed to aid in automating tasks on physical devices.

    354 parts22Apache-2.0
  • 4 layers39.1 × 31 mmUSB2CAN, the printed circuit board in 3D

    USB2CAN

    corygrant/USB2CAN_HW

    Hardware - USB to CAN adapter

    37 parts14MIT

Questions

How big is the WifiLightsController PCB?

It measures 49.8 × 22 mm and has 2 copper layers, 1.6 mm thick.

What parts does the WifiLightsController use?

14 parts, built around the LD1117S33CTR-HXY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the WifiLightsController KiCad files?

From the David-Estevez/WifiLightsController repository on GitHub, at the commit this page was made from: the board is hardware/WifiLightsController.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the WifiLightsController design in my own project?

Its repository states no licence, so its author keeps all rights: ask David-Estevez before reusing the design.