Skip to the content
2 layers96 × 125.6 mmKOSMOS Function Generator, the printed circuit board in 3D

KOSMOS Function Generator

DavesKosmoModules/Farini-VC-ADSR5

Contained are schematics & gerber files for pcb fabrication of both electrical and front panel. This is sutiable for entry level however a basic level of electronics, soldering, fault finding, and some basic tools are…

Size
96 × 125.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
96
Nets
79
Pads
301
Tracks, vias
777, 62
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 Oct 2021
Updated
14 Nov 2021

Overview

KOSMOS Function Generator is an open-source printed circuit board by DavesKosmoModules, from the DavesKosmoModules/Farini-VC-ADSR repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 96 × 125.6 mm with 96 parts on 79 nets, routed with 777 tracks and 62 vias.

It is built around the TL072. Its parts include 48 resistors, 13 capacitors, 13 diodes, 5 ICs and 3 switches.

Main components

1

README

README.md

Farini-VC-ADSR

Farini Photo

Voltage controlled AD / ADSR

  • Envelope generator switchable between ADSR & AD

  • Loopable

  • End Of Cycle output

  • Output can be inverted for ducking

  • When in AD mode use the trigger input

  • When in ADSR mode, use the gate input to start envelope, the trigger input will retigger the attach phase

  • When in cycle mode use no inputs

Contained are schematics & gerber files for pcb fabrication of both electrical and front panel. This is sutiable for entry level however a basic level of electronics, soldering, fault finding, and some basic tools are required.

Schematic

BOM

If you wish to edit in ki-cad the following dependencies are required, however the component values will need tidying on the PCB as I use a forked version with no values.

https://github.com/holmesrichards/Kosmo_panel

https://github.com/holmesrichards/aoKicad

Parts

96
QtyValueFootprintReferences
31100kao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R26, R27, R30, R31 +15
9100kao_tht:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles_centeredRV1, RV2, RV3, RV4, RV5, RV7, RV8, RV9, RV10
91N4148ao_tht:D_DO-35_SOD27_P7.62mm_HorizontalD2, D3, D4, D6, D7, D10, D11, D12, D13
80.1uFao_tht:C_Disc_D3.0mm_W1.6mm_P2.50mmC3, C4, C5, C6, C7, C8, C12, C13
310kao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR25, R32, R35
347kao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R12, R24
36k2ao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R10, R11
3TL074ao_tht:DIP-14_W7.62mm_Socket_LongPadsU1, U2, U3
210uFao_tht:CP_Radial_D6.3mm_P2.50mmC1, C2
21N5817ao_tht:D_DO-41_SOD81_P10.16mm_HorizontalD1, D5
21kao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR28, R42
2200kao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR7, R33
22N3904ao_tht:TO-92_Inline_WideQ1, Q2
2LEDao_tht:LED_D5.0mmD8, D9
10.001uFao_tht:C_Disc_D3.0mm_W1.6mm_P2.50mmC9
10.01uFao_tht:C_Disc_D3.0mm_W1.6mm_P2.50mmC10
10.03uFao_tht:C_Disc_D3.0mm_W1.6mm_P2.50mmC11
110kao_tht:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles_centeredRV6
130kao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR29
1470ao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR44
151kao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR40
1AS3310ao_tht:DIP-16_W7.62mm_Socket_LongPadsU4
1Conn_01x10_MaleConnector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ2
1SW_DPDT_x2ao_tht:DPDT-toggle-switch-1M-seriesxSW2
1SW_Pushao_tht:Push_button_A-5050SW3
1SW_SPDTao_tht:SPDT-toggle-switch-1M-seriesSW1
1Synth_power_2x5ao_tht:Power_HeaderJ1
1TL072ao_tht:DIP-8_W7.62mm_Socket_LongPadsU5
1linkao_tht:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR36

More from DavesKosmoModules/Farini-VC-ADSR

1
  • 2 layers96 × 61.7 mmFunction Generator Jacks, the printed circuit board in 3D

    Function Generator Jacks

    DavesKosmoModules/Farini-VC-ADSR

    Contained are schematics & gerber files for pcb fabrication of both electrical and front panel. This is sutiable for entry level however a basic level of electronics, soldering, fault finding, and some basic tools are…

    9 parts5CC0-1.0

Similar boards

  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers39.6 × 99.1 mmESP32-Eurorack Audio, the printed circuit board in 3D

    ESP32-Eurorack Audio

    ctag-fh-kiel/ctag-tbd

    CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

    128 parts260
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers37 × 113.9 mmVCO, the printed circuit board in 3D

    VCO

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    104 parts208
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146

Questions

How big is the KOSMOS Function Generator PCB?

It measures 96 × 125.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KOSMOS Function Generator use?

96 parts, built around the TL072. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KOSMOS Function Generator KiCad files?

From the DavesKosmoModules/Farini-VC-ADSR repository on GitHub, at the commit this page was made from: the board is KOSMOS Function Generator.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the KOSMOS Function Generator design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).