Skip to the content
2 layersMic, the printed circuit board in 3D

A microphone board, for board-design skills

Copper layers
2
Thickness
1.6 mm
Parts
38
Nets
38
Pads
139
Tracks, vias
246, 242
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Aug 2026
Updated
27 Oct 2026

Overview

Mic is an open-source printed circuit board by DaBiggestSeal, from the DaBiggestSeal/BOARD-mic repository on GitHub, published under the MIT licence. It is a 2-layer board with 38 parts on 38 nets, routed with 246 tracks and 242 vias.

It is built around the INA826AID, TS5A3159ADBVRE4 and AOM-5024L-HD-F-R. Its parts include 15 capacitors, 12 resistors, 4 ICs, 2 connectors and 1 diode.

Main components

3

Parts

38
QtyValueFootprintReferences
71uCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC1, C2, C3, C5, C6, C7, C8
410kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR2, R5, R6, R11
210uCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC4, C9
222RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR7, R8
222pCapacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC13, C14
2470uCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC11, C12
24u7Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mmC10, C15
25k1Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR12, R13
110kPotentiometer_THT:Potentiometer_Alps_RK097_Single_HorizontalRV1
112MHzCrystal:Crystal_C26-LF_D2.1mm_L6.5mm_VerticalY1
1150RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR3
11MResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR10
12k2Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR1
1470RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalR4
1AOM-5024L-HD-F-RAOM-5024L-HD-F-R:MIC_AOM-5024L-HD-F-RMK2
1AudioPlug3Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHolesJ1
1INA826AIDINA826AID:SOIC127P599X175-8NU2
1LEDLED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z1.6mmD1
1PCM2902CDBRPCM2902C:SOP65P780X200-28NU3
1SW_PushButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFSSW1
1TLV70033_SOT23-5Package_TO_SOT_SMD:SOT-23-5U4
1TS5A3159ADBVRPackage_TO_SOT_SMD:SOT-23-6U1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7051xJ2

Similar boards

  • 4 layers67.5 × 9.2 mmRef mic, the printed circuit board in 3D

    Ref mic

    loudifier/OpenRefMic

    open hardware design for a high-performance low-cost measurement microphone

    47 parts169MIT
  • 4 layers22.5 × 15 mmSensor board, the printed circuit board in 3D

    Sensor board

    tudsat-rocket/sensor_board

    Note: This description might need to be updated for hardware revision 2.

    43 parts
  • 2 layers225 × 180 mmDC Load, the printed circuit board in 3D

    DC Load

    yjv/dc-load-schematic

    160 parts
  • 2 layers99.1 × 69.9 mmAtoomnetmarc IoT12 IoT12 Control Board, the printed circuit board in 3D

    Atoomnetmarc IoT12 IoT12 Control Board

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    73 parts1
  • 2 layers27.9 × 20.6 mmMonitorswitch, the printed circuit board in 3D

    Monitorswitch

    HenrykRichter/RaddSwi

    Monitorswitch addon for Matze Flickerfixer

    14 parts3
  • 2 layers82 × 62.5 mmEnergy meter, the printed circuit board in 3D

    Energy meter

    BBBSnowball/energy-monitor

    Energy meter with GD32V and a current transformer

    112 parts
  • 4 layers196.5 × 100 mmDonkeyDrift MUS4, the printed circuit board in 3D

    DonkeyDrift MUS4

    DonkeyDrift/Hardware

    Hardware for DonkeyDrifter

    263 partsApache-2.0
  • 8 layers40 × 94 mmFD MAIN-01, the printed circuit board in 3D

    FD MAIN-01

    Fairank/FieldDock

    Compact iPhone companion hardware: editable PCB, mechanical CAD and portable firmware. Engineering prototype; original work available for noncommercial use.

    424 parts

Questions

What parts does the Mic use?

38 parts, built around the INA826AID, TS5A3159ADBVRE4 and AOM-5024L-HD-F-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mic KiCad files?

From the DaBiggestSeal/BOARD-mic repository on GitHub, at the commit this page was made from: the board is mic.kicad_pcb and its schematic mic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mic design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).