4 layers101 × 53.3 mm
2 layers54.9 × 66.5 mm
KiCad Schematic
DDeGonge/Shuffle-o-matic106Open Source Card Shuffler
- Size
- 54.9 × 66.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 58
- Pads
- 183
- Tracks, vias
- 501, 38
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Aug 2019
- Updated
- 29 May 2022
Overview
KiCad Schematic is an open-source printed circuit board by DDeGonge, from the DDeGonge/Shuffle-o-matic repository on GitHub, published under the MIT licence. It is a 2-layer board of 54.9 × 66.5 mm with 51 parts on 58 nets, routed with 501 tracks and 38 vias.
It is built around the PMV40UN2R. Its parts include 21 connectors, 19 resistors, 3 capacitors, 2 ICs and 2 diodes. It belongs with the robots and motor control boards of this library.
Main components
1README
README.mdShuffle-o-matic
Full overview video: https://www.youtube.com/watch?v=eMTXyl7tPEk
Thingiverse page (cad files): https://www.thingiverse.com/thing:4547302
Significant experience recommended if you want to take on this project, it isn't documented very well :)
Hardware required
| Qty | Item | Supplier | |
|---|---|---|---|
| 3D printed Parts | |||
| 3 | Nema 17 stepper motors, <=40mm long | 17HS15-1504S-X1 39mm long | |
| 5 | Gates GT2 20t idlers with standoffs | ||
| 3 | Gates GT2 20t drive pulleys | ||
| 1 | MG90S servo | MG90S servo | |
| 1 | 600rpm micro gearbox motor | DC 3V 6V 12V GA12-N20 | |
| 2 | MGN9 linear profile bearings, 135mm len | MGN9C | |
| 1 | MGN9 linear profile bearing, 95mm len | MGN9C | |
| 6 | 6700 bearing | 6700ZZ | |
| 1 | Raspberry Pi | ||
| 1 | (optional) Raspberry Pi Camera V1.4 | ||
| 1 | (optional) 3x 3mm white led | ||
| 1 | Adafruit Feather | ||
| 1 | Breadboard/pcb for laying out components | ||
| ~ | Assorted M2 and M3 nuts and bolts |
All part numbers in the pcb should be accurate, though again review and order at your own risk. Use KiCad to view/edit, it's free!
And probably a few other things I'm forgetting. Seriously if you want to make this, do so at your own risk. Review the cad model yourself and make sure you have everything accounted for! This is not a project for beginners!
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R5, R6, R7, R8, R9, R12, R13, R14, R15, R16, R19 |
| 11 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8, J9, J14, J21 |
| 4 | Hole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | J17, J18, J19, J20 |
| 3 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.8 | C1, C2, C4 |
| 3 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J10, J11, J12 |
| 3 | Pololu_Breakout_A4988 | Module:Pololu_Breakout-16_15.2x20.3mm | A1, A2, A3 |
| 2 | 174 | Resistor_SMD:R_0603_1608Metric | R10, R17 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D2 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 1ohm | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | Conn_01x02 | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J13 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J16 |
| 1 | FeatherM4 | Connector_PinHeader_2.54mm:FeatherFootprint | U1 |
| 1 | PMV40UN2R | Package_TO_SOT_SMD:SOT-23 | Q1 |
Similar boards
- 2 layers60 × 50 mm
- 2 layers40 × 30 mm
Solenoid driver breakout
wntrblm/jellyfish-and-starfish
Jellyfish and Starfish are control boards designed for use with the LumenPnP. Starfish controls the base of the machine including X & Y axes and pneumatics.
25 parts112 - 2 layers216.9 × 86.8 mm
Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
51 parts2.1k - 2 layers49.4 × 94.2 mm
- 2 layers72 × 42 mm
NRF24 jammer
W0rthlessS0ul/nRF24_jammer
The nRF24 jammer is a powerful tool that requires an ESP32 and configurable numbers of NRF24 modules to assemble.
51 parts1kMIT - 2 layers170 × 162 mm
Snowflake
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
51 parts915 - 2 layers33 × 50 mm
Questions
How big is the KiCad Schematic PCB?
It measures 54.9 × 66.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KiCad Schematic use?
51 parts, built around the PMV40UN2R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KiCad Schematic KiCad files?
From the DDeGonge/Shuffle-o-matic repository on GitHub, at the commit this page was made from: the board is pcb/KiCad Schematic.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the KiCad Schematic design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).