
Galagino pcb set
harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

Esp32-breakout is an open-source printed circuit board by Cyclone-Robosub, from the Cyclone-Robosub/kicad-esp32-breakout repository on GitHub. It is a 2-layer board of 71.6 × 57.4 mm with 21 parts on 41 nets, routed with 105 tracks and 18 vias.
It is built around the ESP32-DEVKITC-VE. Its parts include 8 connectors, 7 resistors, 5 diodes and 1 IC. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5, R6, R7 |
| 5 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 1 | ESP32-DEVKITC | ESP32-DEVKITC:ESP32-DEVKITC | U1 |
| 1 | Female-Left | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J7 |
| 1 | Female-Right | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J8 |
| 1 | GoSW | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | I2C | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J6 |
| 1 | LED1 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J1 |
| 1 | LED2 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J2 |
| 1 | SPI | Connector_JST:JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical | J4 |
| 1 | UART | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J5 |

harbaum/galagino
A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32
RParkerE/OpenSilicon
OpenSilicon enables DIY semiconductor fabrication with open-source guides for building IC equipment at home. The project includes BOMs, 3D files, firmware, and PDKs, supporting makers and researchers in chip fabrication.

cole8888/SRNE-Solar-Charge-Controller-Monitor
Read data from SRNE solar charge controllers.




ste2425/PSP-Bluetooth-AVConnector
An AV-Out Breakout library for the PSP. Providing Kicad symbols and footprints to interface with the PSP 2/3K AVOut socket (also known as the TVOut socket)

It measures 71.6 × 57.4 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the ESP32-DEVKITC-VE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Cyclone-Robosub/kicad-esp32-breakout repository on GitHub, at the commit this page was made from: the board is esp32-breakout.kicad_pcb and its schematic esp32-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Cyclone-Robosub before reusing the design.