4 layers99 × 53.3 mm
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io
199 parts1.7kApache-2.0
2 layers58.4 × 94 mm
CR-160-R7
CrematInc/CR-160-R7evaluation board for Cremat's shaping amplifier modules CR-200-X and CR-210
- Size
- 58.4 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 40
- Pads
- 176
- Tracks, vias
- 348, 34
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 24 Nov 2015
- Updated
- 24 Nov 2015
Overview
CR-160-R7 is an open-source printed circuit board by CrematInc, from the CrematInc/CR-160-R7 repository on GitHub. It is a 2-layer board of 58.4 × 94 mm with 67 parts on 40 nets, routed with 348 tracks and 34 vias.
It is built around the HA9P5002-5Z, MMBT3904 and MMBT3906. Its parts include 25 resistors, 16 capacitors, 7 ICs, 5 connectors and 2 diodes.
Main components
3
HA9P5002-5Z
SOIC-8-15V~15V 0℃~+75℃ 110MHz 1300V/us 20mV 220mA 30V 30uV/℃ 50ns 64dB 7uA 8.3mA Capacitive load driving、Current limiting / short-circuit protection SOIC-8 Differential Amplifiers ROHSRenesas ElectronicsDifferential Amplifiers
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)MMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 10uF | Cremat_footprints:1206 | C1, C2, C3, C4, C5, C7, C8, C9, C10, C13, C14 |
| 8 | 4.7 | Cremat_footprints:1206 | R10, R11, R12, R13, R15, R16, R21, R22 |
| 5 | 1.0k | Cremat_footprints:0805 | R1, R2, R20, R23, R24 |
| 4 | 390 | Cremat_footprints:0805 | R3, R5, R14, R17 |
| 3 | EL5163 | Cremat_footprints:SC-70-5 | U1, U2, U3 |
| 2 | 0.1uF | Cremat_footprints:0805 | C11, C12 |
| 2 | 1000uF | Cremat_footprints:electrolytic_1000uF_16V | C15, C16 |
| 2 | 10uH | Cremat_footprints:0805 | L1, L2 |
| 2 | 43 | Cremat_footprints:1206 | R4, R6 |
| 2 | 47 | Cremat_footprints:1206 | R18, R19 |
| 2 | 5.6V | Cremat_footprints:SOD-323 | D1, D2 |
| 2 | NTPA7220 | Cremat_footprints:200mil | TH1, TH2 |
| 1 | +12V | Cremat_footprints:banana | J3 |
| 1 | -12V | Cremat_footprints:banana | J5 |
| 1 | 100k | Cremat_footprints:trimpot | R25 |
| 1 | 100k | Cremat_footprints:0805 | R9 |
| 1 | 1k | Cremat_footprints:trimpot_Vishay_T93XB | R8 |
| 1 | 1uF | Cremat_footprints:1206 | C6 |
| 1 | 200k | Cremat_footprints:Trimpot_SMD | R7 |
| 1 | CR-200 | Cremat_footprints:8pinSIP | U4 |
| 1 | CR-210 | Cremat_footprints:8pinSIP | U5 |
| 1 | GND | Cremat_footprints:banana | J4 |
| 1 | HA9P5002 | Cremat_footprints:SO8 | U6 |
| 1 | Jump | Cremat_footprints:320 | JU1 |
| 1 | MAX4649 | Cremat_footprints:SOT-23-8 | U7 |
| 1 | MMBT3904 | Cremat_footprints:SOT23-3 | Q1 |
| 1 | MMBT3906 | Cremat_footprints:SOT23-3 | Q2 |
| 1 | gain/polarity | Cremat_footprints:3Dip | SW1 |
| 1 | input | Cremat_footprints:BNC | J1 |
| 1 | output | Cremat_footprints:BNC | J2 |
The 63 most common of 67 parts.
Similar boards
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 4 layers304.8 × 330.2 mm
- 2 layers27.9 × 101.6 mm
MFOS Eight Stage Phase Shifter - Main
mzuelch/CATs-Eurosynth
Analog Synth Eurorack Modules
105 parts166MIT - 6 layers160 × 100 mm
- 6 layers304.8 × 243.8 mm
- 2 layers60.2 × 106.5 mm
TiNRS - DuckTape
ThisIsNotRocketScience/Eurorack-Modules
This is not Rocket Science presents: Eurorack modular synthesizer modules!
262 parts87MIT - 2 layers84 × 85 mm
Questions
How big is the CR-160-R7 PCB?
It measures 58.4 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CR-160-R7 use?
67 parts, built around the HA9P5002-5Z, MMBT3904 and MMBT3906. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CR-160-R7 KiCad files?
From the CrematInc/CR-160-R7 repository on GitHub, at the commit this page was made from: the board is CR-160-R7.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CR-160-R7 design in my own project?
Its repository states no licence, so its author keeps all rights: ask CrematInc before reusing the design.