Skip to the content
2 layers106 × 37.8 mmPanelControls, the printed circuit board in 3D

4 channel EStim box inspired by the mk312bt, with Lua scripting support

Size
106 × 37.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
39
Pads
175
Tracks, vias
402, 80
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
16 Nov 2021
Updated
20 Oct 2026

Overview

PanelControls is an open-source printed circuit board by CrashOverride85, from the CrashOverride85/zc95 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 106 × 37.8 mm with 48 parts on 39 nets, routed with 402 tracks and 80 vias.

It is built around the ADS1115IDGS, TCA9534PW and WS2812D-F5. Its parts include 14 capacitors, 11 resistors, 9 ICs, 5 connectors and 1 switch.

Main components

3

README

README.md

ZC95

Note: This repo has submodules, so if cloning, it's best to use the recursive option.

Introduction

The ZC95 is a DIY four channel EStim box with similar output design and feel to the MK312-BT (which in turn is a clone of the ET-312B).

zc95

The box is primarily intended for standalone use (i.e. not used whilst connected to phone/laptop/tablet), but can be controlled remotely via a Python GUI, and run Lua scripts that have been uploaded to it over serial or WiFi.

Main features:

  • 4 isolated channels
  • Audio input - line level for estim tracks or microphone input (selectable via menu)
  • Many inbuilt patterns - around 14, not counting audio and more esoteric stuff
  • Custom patterns can be written in Lua
  • Two stereo 3.5mm trigger input sockets, allowing for up to 4 external inputs (e.g. remote buttons, foot pedals, etc.)
  • Support for many BLE remote/camera buttons, e.g. to trigger output when the button is pressed
  • Remote control over WiFi or serial using a python app
  • Allows limited control of a certain type of 433MHz shock collar
  • Somewhat experimental BLE steaming - allows for per-pulse level control from laptop or other device, with an example in python
  • An accessory port with 3 output lines that can be controlled from Lua scripts, to allow interacting with other devices

Technical details:

  • Has been designed with the JLC PCB assembly service in mind, and is mostly an SMD design with a few though hole parts
  • Uses 2x Raspberry Picos
  • Firmware is open source and mostly C++, and makes use of many 3rd party libraries
  • 26650 cell for power
  • KiCad project files included in repo, not just gerbers
  • Audio input includes microphone preamp that can be toggled via menu, along with variable gain
  • Consists of 3 PCBs:
    • Front panel - no traces, just text / mounting holes
    • Front panel controls - 4x POTs and associated ADC, 1x rotary encoder and 6 serial RGB LEDs. Designed for production using the SMT assembly service at JLCPCB, with a handful of extra through hole parts also requiring hand soldering.
    • Main board - power supply / charging, pattern generation, button input, output signal generation, audio input
  • Case is either an off the shelf Hammond 1598DBK (larger), or a 3D printed case (step/stl files provided)

Build guide

Schematics

Gerbers

Compiled firmware

Operation notes

Pattern guide

Lua scripting notes

Notes on building source

Credits

Miscellaneous

History

The ZC95 is very heavily inspired by the MK312-BT, which is a reversed engineered version of the ET-312. The original repo for that project is long gone, but there is a fork here.

The ZC95 mk1 was made public in late 2021, and had a similar form factor to the MK312. That version has been built successfully by many.

The ZC95 mk1 had the output stage on a separate PCB. It's no longer part of the zc95 build, but could still be built and used to add 4 channel estim output to an Arduino (with notes for & tested with an ESP32). The PCB / BoM / build notes for it are here.

MKI vs. MKII

These are the main changes from the MKI to MKII:

  • Much smaller - the mainboard is less than half the size
  • Output, Audio and main board are now combined
  • USB-C charger input instead of 15v barrel jack
  • 26650 cell instead of 12v SLA battery (similar capacity)
  • "Aux" socket swapped for separate "Serial" and "Audio" sockets
  • Output sockets changed from 2.5mm to 3.5mm
  • Serial selectable (via jumpers) between 3.3v TTL and RS232
  • Display no longer briefly flashes white on power on
  • Removed: 12v output on accessory port

Support, feedback, etc.

The ZC95 project is provided 'as is' without warranty of any kind, either express or implied. The project is provided for your use at your own risk.

Having said that, if you run into difficulties or have questions, the two best places to try are:

Other projects

Other related projects that are worth checking out:

TODO

Firmware

  • Triphase support from Lua
  • Allow Lua scripts to interact with shock collars
  • Combo pattern? Having, e.g., waves on channels 1+2 plus something like TENS on 3+4 would be good
  • Save pattern settings on exit?
  • Disable when plugged in / switch to charging screen (maybe a setting in the menu to disable)
  • Accessory port doesn't do much - just 3 output lines. There's a serial interface there too, which could be exposed in the Lua environment

Hardware

  • Improved 3D printed case?

Known issues

  • Will charge faster if switched on when plugged in, and not switched off for at least 10 seconds (or just left on)
  • Sometimes when finished charging (battery icon showing solid green), the battery percentage will only show ~95% despite being fully charged. Should be fixed in a future firmware version.

Parts

48
QtyValueFootprintReferences
12100nFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC1, C4, C5, C6, C7, C8, C9, C10, C11, C13, C14, C15
910KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3, R4, R5, R7, R8, R9, R10, R11
6WS2812DProjLib:WS2812D-F5U3, U4, U5, U6, U7, U8
4R_POTProjLib:ALPSALPINE RK09L1140A2URV1, RV2, RV3, RV4
210uFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC2, C12
1100RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
11KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR6
1ADJProjLib:BOURNS PEC11L-4125F-S0020SW1
1ADS1115IDGSPackage_SO:TSSOP-10_3x3mm_P0.5mmU1
1BUTTON_ALibrary:ButtonConnectorJ1
1BUTTON_BLibrary:ButtonConnectorJ2
1BUTTON_CLibrary:ButtonConnectorJ3
1BUTTON_DLibrary:ButtonConnectorJ4
1Conn_02x04_Odd_EvenConnector_IDC:IDC-Header_2x04_P2.54mm_VerticalJ5
1TCA9534Package_SO:TSSOP-16_4.4x5mm_P0.65mmU2
1TLC59108IPWRPackage_SO:TSSOP-20_4.4x6.5mm_P0.65mmU9

The 44 most common of 48 parts.

More from CrashOverride85/zc95

2
  • 2 layers191.5 × 76 mmPcb project, the printed circuit board in 3D

    Pcb project

    CrashOverride85/zc95

    4 channel EStim box inspired by the mk312bt, with Lua scripting support

    337 parts117GPL-3.0
  • 2 layers60.3 × 139.1 mmOutputBoard, the printed circuit board in 3D

    OutputBoard

    CrashOverride85/zc95

    4 channel EStim box inspired by the mk312bt, with Lua scripting support

    117 parts117GPL-3.0

Similar boards

  • 2 layers67.3 × 96.9 mmWaterQualityControl, the printed circuit board in 3D

    WaterQualityControl

    Hasatio/WaterQualityControl

    The circuit taken as an example while designing the board Adafruit PCA9685

    135 parts
  • 2 layers39c3PCBLEDC100R Rev.0, the printed circuit board in 3D

    39c3PCBLEDC100R Rev.0

    c3re/39c3PCBLEDC100R

    The 39c3PCBLEDC100 is a Coaster for your drinks with option for LED and microcontroller upgrade. By stacking the coasters, you can also build nice blinky towers.

    28 parts15CC-BY-4.0
  • 2 layers242.9 × 76.2 mmLeSTMovoz, the printed circuit board in 3D

    LeSTMovoz

    calvin-mcd/LeSTMovoz

    drop-in replacement STM32 pcb for the Lesovoz pcb, originally for minivan style cases

    123 parts9GPL-3.0
  • 2 layers46 × 38 mmNode, the printed circuit board in 3D

    Node

    feklee/san

    Self Aware Network

    39 parts8WTFPL
  • 2 layers38c3PCBLEDC100R Rev.0, the printed circuit board in 3D

    38c3PCBLEDC100R Rev.0

    c3re/38c3PCBLEDC100R

    Solder-Kit with some LEDs. Can also be used as a coaster for drinks.

    28 parts1CC-BY-4.0
  • 2 layers141 × 40 mmModel-108, the printed circuit board in 3D

    Model-108

    vd-rd/prod-pdu

    105 parts
  • 2 layers80 × 124 mmTreeLights, the printed circuit board in 3D

    TreeLights

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915

Questions

How big is the PanelControls PCB?

It measures 106 × 37.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PanelControls use?

48 parts, built around the ADS1115IDGS, TCA9534PW and WS2812D-F5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PanelControls KiCad files?

From the CrashOverride85/zc95 repository on GitHub, at the commit this page was made from: the board is pcb-project/FrontPanelControls/v0_2/PanelControls.kicad_pcb and its schematic misc/OutputBoard/kicad/output.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PanelControls design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).