2 layers
2 layers35 × 30 mm
CE Makerverse Motor Driver-2ch Bipolar
CoreElectronics/CE-Makerverse-Motor-Driver-2ch-Bipolar2Hardware repo for the Makerverse 2ch Motor Driver
- Size
- 35 × 30 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 21
- Pads
- 90
- Tracks, vias
- 163, 11
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 3 Dec 2021
- Updated
- 9 Jan 2023
Overview
CE Makerverse Motor Driver-2ch Bipolar is an open-source printed circuit board by CoreElectronics, from the CoreElectronics/CE-Makerverse-Motor-Driver-2ch-Bipolar repository on GitHub. It is a 2-layer board of 35 × 30 mm with 45 parts on 21 nets, routed with 163 tracks and 11 vias.
It is built around the TC78H660FTG,EL. Its parts include 7 resistors, 4 capacitors, 4 connectors, 3 ICs and 2 diodes. It belongs with the robots and motor control boards of this library.
Main components
1README
README.mdMakerverse™ Motor Driver - 2 channel / BiPolar Stepper
This is the repo for the Core Electronics Makerverse™ Motor Driver 2ch.
License
This project is open source - please review the LICENSE.md file for further licensing information.
If you have any technical questions, or concerns about licensing, please contact technical support on the Core Electronics forums.
"Makerverse" and the Makerverse logo are trademarks of Core Electronics Pty Ltd.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | G*** | label | kibuzzard-611F03C6, kibuzzard-611F03CE, kibuzzard-611F10A0, kibuzzard-611F10AC, kibuzzard-611F029E, kibuzzard-611F033D, kibuzzard-611F1086, kibuzzard-611F1098 |
| 4 | 4k7 | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | Screw_Terminal_01x02 | lib:terminal-2-pin-5mm | J1, J3, J4 |
| 2 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C3 |
| 2 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2 |
| 2 | G*** | kibuzzard-62F06A1B | kibuzzard-62F06A1B, kibuzzard-62F06A1B |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 20k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x5.3 | C2 |
| 1 | 50k | lib:smdPot | RV1 |
| 1 | 57.6k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | AMS1117-5.0 SOT-89 | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | D_Schottky | Diode_SMD:D_SMA | D2 |
| 1 | G*** | kibuzzard-62F08A45 | kibuzzard-62F08A45 |
| 1 | G*** | kibuzzard-62F08A4D | kibuzzard-62F08A4D |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LOGO | CoreElectronics_Artwork:makerverse_logo_short_14.0x2.4mm | G*** |
| 1 | LOGO | lib:CE08038 | G*** |
| 1 | LOGO | CoreElectronics_Artwork:oshw | G*** |
| 1 | ME431 | Package_TO_SOT_SMD:SOT-23 | U1 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SolderJumper_2_Open | CoreElectronics_Components:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm_NoMask | JP1 |
| 1 | TC78H660FTG,EL | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias | IC1 |
| 1 | TestPoint | TestPoint:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm | TP1 |
Similar boards
- 2 layers160 × 238.5 mm
- 2 layers20.4 × 20.5 mm
- 2 layers100 × 70.3 mm
- 2 layers30 × 61.3 mm
- 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm
- 2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0
Questions
How big is the CE Makerverse Motor Driver-2ch Bipolar PCB?
It measures 35 × 30 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CE Makerverse Motor Driver-2ch Bipolar use?
45 parts, built around the TC78H660FTG,EL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CE Makerverse Motor Driver-2ch Bipolar KiCad files?
From the CoreElectronics/CE-Makerverse-Motor-Driver-2ch-Bipolar repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CE Makerverse Motor Driver-2ch Bipolar design in my own project?
Its repository states no licence, so its author keeps all rights: ask CoreElectronics before reusing the design.