
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!

Birthday! is an open-source printed circuit board by CooperLi1, from the CooperLi1/birthday_pcb repository on GitHub. It is a 2-layer board of 190 × 187.5 mm with 41 parts on 43 nets, routed with 165 tracks and 0 vias.
It is built around the 1N5819WS and SS22FA. Its parts include 12 resistors, 12 diodes, 6 capacitors, 4 switches and 2 transistors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 680 | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R8, R9, R10, R11, R12 |
| 10 | LED | LED_THT:LED_D5.0mm | D2, D3, D4, D5, D6, D7, D8, D9, D10, D12 |
| 4 | 4952 | 4592:4952 | S1, S2, S3, S4 |
| 3 | 100uF | Capacitor_SMD:C_1210_3225Metric | C1, C4, C5 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C2, C6 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 1 | 100uF | EEE_FK1E101AP:CAP_EEFK_E_PAN | C3 |
| 1 | 1A | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 1N5819WS | Diode_SMD:D_SOD-323 | D11 |
| 1 | 2479 | 2479 (1):BAT_2479 | BT1 |
| 1 | Conn_01x02_Pin | Connector_Wire:SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm | J1 |
| 1 | SS22FA | ss22fa:SOD-123FA_ONS | D1 |
| 1 | SW_SPDT | 472121020311:472121020311 | ON |
| 1 | ~ | Cooper's Footprints:Adafruit Audio FX Sound Board | U1 |

makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!


AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)

sd2psx/pcb
The PCB must be produced in 0.8mm thickness. Production files are provided under the "Releases" tab. These do not include the through-hole OLED module.

plinkysynth/plinky_public
a public release of the plinky sw and hw


o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.

zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
It measures 190 × 187.5 mm and has 2 copper layers, 1.6 mm thick.
41 parts, built around the 1N5819WS and SS22FA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CooperLi1/birthday_pcb repository on GitHub, at the commit this page was made from: the board is Birthday!.kicad_pcb and its schematic Birthday!.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CooperLi1 before reusing the design.