Skip to the content
2 layers74.5 × 68.7 mmHeltec, the printed circuit board in 3D

Open source documentation and firmware for the CH HumberLora Kit

Size
74.5 × 68.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
42
Pads
83
Tracks, vias
122, 1
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
14 Jul 2019
Updated
10 Apr 2020

Overview

Heltec is an open-source printed circuit board by ConnectedHumber, from the ConnectedHumber/Air-Quality-Kit repository on GitHub. It is a 2-layer board of 74.5 × 68.7 mm with 17 parts on 42 nets, routed with 122 tracks and 1 via.

It is built around the BME280. Its parts include 4 connectors, 3 switches, 2 ICs, 1 capacitor and 1 resistor.

Main components

1

README

PCB Designs/AQ_V3/README.md

AQ_V3 PCB design

These are KiCAD files for the PCB design version 3. Historically V1 was based on a WeMOS device, V2 was based on a Heltec to enable the use of LoRa but had a track error.

V3 also incorporates a high side switch to allow the 5V to the SDS011 sensor to be turned off when the Vext is turned off. The GPS option (3V3) is also powered from the Vext. A large capacitor has been added to the 5V input to the Heltec to prevent resets caused by the SDS011 switching on.

Parts

17
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
110kResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR3
1470uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
15VConnector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_VerticalJ3
1BME280Connector_JST:JST_XH_B06B-XH-A_1x06_P2.50mm_VerticalJ1
1BME280_0x76Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP2
1BME680_0x76Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1
1DownButton_Switch_SMD:SW_SPST_B3S-1000SW1
1GPSConnector_JST:JST_XH_B04B-XH-A_1x04_P2.50mm_VerticalJ5
1Heltect_Lora_32Heltec_Models:Heltec_LoRa_32U1
1SDS011Connector_JST:JST_XH_B05B-XH-AM_1x05_P2.50mm_VerticalJ2
1STMPS2171MTRPackage_TO_SOT_SMD:SOT-23-5_HandSolderingU2
1SelectButton_Switch_SMD:SW_SPST_B3S-1000SW2
1UpButton_Switch_SMD:SW_SPST_B3S-1000SW3

Similar boards

  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 4 layers38.6 × 39.5 mmRuuvitag revb71, the printed circuit board in 3D

    Ruuvitag revb71

    ruuvi/ruuvitag_hw

    RuuviTag hardware projects

    64 parts115
  • 4 layers35.1 × 76.3 mmTiny4FSK, the printed circuit board in 3D

    Tiny4FSK

    New-England-Weather-Balloon-Society/Tiny4FSK

    Horus Binary v2 HAB Tracker

    90 parts96CERN-OHL-W-2.0
  • 2 layers29.8 × 33.7 mmPecanpico9, the printed circuit board in 3D

    Pecanpico9

    DL7AD/pecanpico9

    A lightweight APRS tracker for balloons

    116 parts68GPL-3.0
  • 2 layers136 × 100 mmClimateSprinklerController, the printed circuit board in 3D

    ClimateSprinklerController

    kbx81/ClimateSprinklerController

    ESP32-based climate and sprinkler controller for use with ESPHome

    194 parts56
  • 4 layers36.6 × 60.3 mmStratoSoar MK3.0, the printed circuit board in 3D

    StratoSoar MK3.0

    crnicholson/StratoSoar-MK3

    StratoSoar MK3, an autonomous glider meant for high-altitudes, accessible to everyone

    85 parts43
  • 2 layers23 × 50 mmPecanpico10, the printed circuit board in 3D

    Pecanpico10

    DL7AD/pecanpico10

    A lightweight APRS tracker and digipeater

    123 parts43
  • 2 layers97 × 77.5 mmESPlant, the printed circuit board in 3D

    ESPlant

    CCHS-Melbourne/ESPlant

    Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266

    77 parts37

Questions

How big is the Heltec PCB?

It measures 74.5 × 68.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Heltec use?

17 parts, built around the BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Heltec KiCad files?

From the ConnectedHumber/Air-Quality-Kit repository on GitHub, at the commit this page was made from: the board is PCB Designs/AQ_V3/Heltec.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Heltec design in my own project?

Its repository states no licence, so its author keeps all rights: ask ConnectedHumber before reusing the design.