
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

A lasertag grenade for the Open Lasertag System
MiniGrenadePCB is an open-source printed circuit board by CheatingBoy6890, from the CheatingBoy6890/Open-Lasertag-System-Grenade repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 129.5 × 109.2 mm with 4 parts on 36 nets, routed with 37 tracks and 4 vias.
It is built around the WEMOS D1 MINI. Its parts include 2 ICs and 2 diodes. It belongs with the ESP8266 boards of this library.
Warning: This project uses lasers. Be sure to always do your own testing by meassuring voltage and current and by looking in datasheets. I am not responsible for any injuries you encounter from using this project. Also make sure to wear proper eye-protection.
Currently the project consists of five parts:
This is the repository for the grenades of the system. here you'll find all the neccessary files on how to build a grenade your self.
The instructions on building can be found in the Hardware folder
What you'll need:
A 3D-printer capable of printing 20cmx20cm
Soldering iron
An ESP 8266 wemos d1 mini
A piece of LED strip 8 LEDs ws2812b
At least slightly transparent filament
perf matrix board or PCB (comming soon)
Cable
Pin headers
Crimp equipment and or breadboard cables
Tsop 4838
1 IR LED
10kΩ resistor
bc 637 transistor
1x Button
Switch
Resistor 25Ω
Battery holder 3 AA batteries
4x 6mmx30mm metal rod or pipe
Time
We are two German students. Since we are twins, we build and programm a lot of projects together. We create all of our projects in our free time. Feel free to mail any questions to cyberfox3801@proton.me .
We want to motivate people to discover what is possible using 3D printing and microcontrollers.
The most productive worker of our small group is our cat Susi.
Congratulations you made it to the end of this readme. If you want this to be longer consider buying us a coffe (https://www.paypal.com/donate/?hosted_button_id=2RZBTA5GMNH6S) so we can make all files longer and better and don't forget to cuddle your cat!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | WS2812B Neopixel | Grenade_Stuff:NeoPixel_strip | D1, D2 |
| 1 | DF-Player_mini | Grenade_Stuff:DF-Player_mini | U1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U2 |

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)

kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.

htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices


It measures 129.5 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
4 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CheatingBoy6890/Open-Lasertag-System-Grenade repository on GitHub, at the commit this page was made from: the board is Hardware/PCB/MiniGrenadePCB/MiniGrenadePCB.kicad_pcb and its schematic Hardware/PCB/MiniGrenadePCB/MiniGrenadePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).