
Coco2
baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

I made this projet through a HackClub workshop at home. With a custom PCB I can blink LED
513-LED Chaser is an open-source printed circuit board by Charles-pyt, from the Charles-pyt/513-LED-Chaser repository on GitHub. It is a 2-layer board of 90 × 100 mm with 18 parts on 18 nets, routed with 117 tracks and 1 via.
It is built around the NE555P. Its parts include 10 diodes, 2 capacitors, 2 resistors, 2 ICs and 1 connector.
I made this projet through a HackClub workshop at home. With a custom PCB I can blink LED. Thanks to HackClub/Bkueprint for buying nedded pieces. It takes me few hours (~5h) because even if I'm great at 3D modeling I am really bad in electronics especially in PCB.
Recently I made a small case to put the PCB inside here are some images :
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | LED | LED_THT:LED_D3.0mm | D1, D2, D5, D6, D7, D8, D9, D10, D11, D12 |
| 1 | 0.01 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 1 uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 4017 | footprints:N16 | U2 |
| 1 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 50k | Potentiometer_THT:Potentiometer_Runtron_RM-065_Vertical | RV1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

DarcyJProjects/touchtone555
An open-source DIY, NE555-based analogue synthesizer - play notes with a stylus



benjiaomodular/SynthCard
I designed this project with the help of PCBWay. You can get a copy of these cards through the PCBWay Shared Projects page.

fortinsylvain/MyCpu
Home brew CPU Hardware with 1-bit ALU implementation using 74LSxx, a micro-code and assembler coded in C#.

hackup/C128Diag
Replica of the Commodore C128 Diagnostic Test cartridge Assy No. 325093-01.
It measures 90 × 100 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Charles-pyt/513-LED-Chaser repository on GitHub, at the commit this page was made from: the board is 513 LED Chaser.kicad_pcb and its schematic 513 LED Chaser.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Charles-pyt before reusing the design.