

A10102-V2
- Size
- 149 × 103.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 70
- Pads
- 263
- Tracks, vias
- 76, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jul 2023
- Updated
- 20 Jun 2024
Overview
A10102-V2 is an open-source printed circuit board by CesarMardueno, from the CesarMardueno/A10102_HotPlate repository on GitHub. It is a 2-layer board of 149 × 103.8 mm with 72 parts on 70 nets, routed with 76 tracks and 0 vias.
It is built around the ATMEGA328P-AU, MAX6675ISA+ and PCF8574T, with the MMBT3904 and RS3A among its other parts. Its parts include 16 resistors, 9 capacitors, 9 connectors, 7 ICs and 5 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
5ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)MAX6675ISA+
SOIC-8-20℃~+85℃ 3V~5.5V SPI SOIC-8 Interface - Specialized ROHSMaxim Integrated (Analog Devices)Interface - SpecializedPCF8574T
SOP-16-300mil-40℃~+85℃ 100kHz 10uA 2.5V~6V 25mA 300uA 8 8 Cascading and address extension、Built-in LED driver I2C Interrupt Output Open-drain SOP-16-300mil I/O Expanders ROHSHGSEMII/O ExpandersMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)RS3A
SMC-65℃~+150℃ 1.3V@3A 150ns 3A 50V 5uA@50V SMC Fast Recovery / High Efficiency Diodes ROHSDiodes IncorporatedFast Recovery / High Efficiency Diodes
README
README.mdA10102_HotPlate
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9 |
| 8 | 10K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5, R11, R12, R13, R14 |
| 7 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C4, C7, C8, C9 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4, H5, H6 |
| 3 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D4, D5 |
| 3 | MAX6675 | Package_SO:SOP-8_3.9x4.9mm_P1.27mm | U2, U3, U4 |
| 3 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | 16.16K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R16 |
| 2 | 200R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C6 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J2, J9 |
| 1 | 1.8K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 1 | 1K | Potentiometer_THT:TRIM_3296-W | RV1 |
| 1 | 312R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 5V | Diode_THT:D_DO-34_SOD68_P7.62mm_Horizontal | D2 |
| 1 | 93.75R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | B1 | Button_Switch_SMD:1TS009C-2400-5000-CT | SW4 |
| 1 | B2 | Button_Switch_SMD:1TS009C-2400-5000-CT | SW3 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RC | BZ1 |
| 1 | Crystal | Crystal:Crystal_HC52-8mm_Vertical | Y1 |
| 1 | FAN | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | FINDER-36.11 | Relay_THT:Relay_SPDT_Finder_36.11 | K1 |
| 1 | LCD-016N002L | Display:LCD-016N002L | U6 |
| 1 | LM35-LP | Package_TO_SOT_THT:TO-92_Inline | U5 |
| 1 | PCF8574 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U7 |
| 1 | Power Supply | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | RS3A | Diode_SMD:D_SMA_Handsoldering | D3 |
| 1 | RST | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW2 |
| 1 | SSR | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J8 |
| 1 | THRM_0 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4 |
| 1 | THRM_1 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | THRM_2 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
More from CesarMardueno/A10102_HotPlate
2- 2 layers110 × 83 mm

- 2 layers100 × 50 mm

Similar boards
- 2 layers34.3 × 42.5 mm

- 2 layers96.5 × 32.2 mm

DC DC 5V Buck Converter
NasserTaqi/5V-DCDC-Buck-Converter
A Simple PCB of a 5V DCDC Buck Converter
11 parts - 2 layers30.9 × 34.9 mm

- 2 layers
/3_dc_to_dc_buck_convetor.kicad_pcb.jpg?size=s&soon)
3 dc to dc buck convetor
Raunak5/electronics-designs
A collection of analog, digital and PCB design projects created using KiCad.
11 parts - 2 layers80 × 50 mm

- 2 layers38.8 × 49.6 mm

- 2 layers113 × 48 mm

Omega3mod zoned
gerbaud-design/KiCAD-gerbaud-design
all the KiCAD files for gerbaud design products and libraries
120 parts - 2 layers

Questions
How big is the A10102-V2 PCB?
It measures 149 × 103.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the A10102-V2 use?
72 parts, built around the ATMEGA328P-AU, MAX6675ISA+, PCF8574T and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the A10102-V2 KiCad files?
From the CesarMardueno/A10102_HotPlate repository on GitHub, at the commit this page was made from: the board is Kicad/A10102_V2/A10102-V2/A10102-V2.kicad_pcb and its schematic Kicad/A10102/A10102.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the A10102-V2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask CesarMardueno before reusing the design.