
OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

Remake of the KRONE / MAN "FBUE" split-flap address board
MAN Adapterplatine is an open-source printed circuit board by CatoLynx, from the CatoLynx/Krone-FBUE repository on GitHub. It is a 2-layer board of 64.6 × 36.8 mm with 14 parts on 19 nets, routed with 258 tracks and 19 vias.
It is built around the 74HC165D. Its parts include 4 capacitors, 2 connectors, 1 IC and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n/50V | Capacitors_SMD:C_0603 | C3, C4 |
| 2 | 4x10k | Resistors_SMD:R_Array_Convex_4x0603 | RN1, RN2 |
| 1 | 10n/100V | Capacitors_SMD:C_0805 | C1 |
| 1 | 22µ/25V | Capacitors_Tantalum_SMD:CP_Tantalum_Case-D_EIA-7343-31_Reflow | C2 |
| 1 | 74HC165 | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U1 |
| 1 | Address | custom:SW_DIP_x8_Slide_SolderJumpers | SW1 |
| 1 | Cable | Connectors:IDC_Header_Straight_20pins | J1 |
| 1 | Module | Pin_Headers:Pin_Header_Straight_2x05 | J2 |
The 10 most common of 14 parts.

shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

slu4coder/Minimal-64x4-Home-Computer
My DIY TTL home computer with VGA and PS/2 and 4x the processing power of a Commodore C64 or Apple II.

slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed


westlicht/performer-hardware
PER|FORMER Eurorack Sequencer - Hardware Design Files

slu4coder/Minimal-64-Home-Computer
Legacy: Full TTL-only home computer with VGA and PS/2 and twice the processing power of a Commodore 64


It measures 64.6 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the 74HC165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CatoLynx/Krone-FBUE repository on GitHub, at the commit this page was made from: the board is MAN Adapterplatine.kicad_pcb and its schematic MAN Adapterplatine.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CatoLynx before reusing the design.