2 layers31.5 × 65 mm
Blinds 2.0 bak2
CasualCodersProjects/AutoBlinds
I'm too lazy to open my own blinds. So I spent 2 years getting a computer to open them for me.
29 parts
2 layers94.5 × 65 mm
Blinds 2.0 Panel
CasualCodersProjects/AutoBlindsI'm too lazy to open my own blinds. So I spent 2 years getting a computer to open them for me.
- Size
- 94.5 × 65 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 85
- Nets
- 59
- Pads
- 463
- Tracks, vias
- 531, 129
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 May 2022
- Updated
- 22 Jul 2022
Overview
Blinds 2.0 Panel is an open-source printed circuit board by CasualCodersProjects, from the CasualCodersProjects/AutoBlinds repository on GitHub. It is a 2-layer board of 94.5 × 65 mm with 85 parts on 59 nets, routed with 531 tracks and 129 vias.
It is built around the A4988 and IFX27001TF V50. Its parts include 21 capacitors, 21 connectors, 18 resistors and 15 ICs.
Main components
2A4988
UncategorisedALLEGRO
IFX27001TF V50
TO-252-2(DPAK)-40℃~+125℃@(Tj) 1 1.4V@(1A) 1A 40V 5V 65dB@(120Hz) 800uA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSInfineon TechnologiesVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
85| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | C | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C2, C2, C2, C7, C7, C7, C8, C8, C8 |
| 9 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R1, R1, R3, R3, R3, R5, R5, R5 |
| 9 | 10k | Resistor_SMD:R_0603_1608Metric | R2, R2, R2, R4, R4, R4, R6, R6, R6 |
| 9 | CP1 | Capacitor_SMD:CP_Elec_6.3x7.7 | C3, C3, C3, C4, C4, C4, C5, C5, C5 |
| 9 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2, J2, J2, J4, J4, J4, J6, J6, J6 |
| 9 | Conn_02x03_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3, J3, J3, J5, J5, J5, J7, J7, J7 |
| 9 | a4988 | a4988:a4988 | U1, U1, U1, U2, U2, U2, U3, U3, U3 |
| 6 | Pin_D1.3mm_L11.0mm | Connector_Pin:Pin_D1.3mm_L11.0mm | 12V, 12V, 12V, GND, GND, GND |
| 3 | AP1117-33 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U6, U6, U6 |
| 3 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1, J1, J1 |
| 3 | IFX27001TFV50 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U5, U5, U5 |
| 3 | LOGO | CC_Logos:CC Logo 5.2mm | G***, G***, G*** |
| 1 |
More from CasualCodersProjects/AutoBlinds
3- 2 layers31.5 × 65 mm
Blinds 2.0
CasualCodersProjects/AutoBlinds
I'm too lazy to open my own blinds. So I spent 2 years getting a computer to open them for me.
28 parts - 2 layers33 × 70.5 mm
Blinds 2.0 bak - Copy
CasualCodersProjects/AutoBlinds
I'm too lazy to open my own blinds. So I spent 2 years getting a computer to open them for me.
25 parts
Similar boards
- 2 layers55.9 × 76.2 mm
- 2 layers97 × 90 mm
Satellite Arduino controller
grinje/AutoSatTracker
Tracking satellites with custom hardware based on stepper motors
27 parts14 - 2 layers144.8 × 104.1 mm
Controller
phorton1/Arduino-cnc-cnc3018
A FluidNC based implementation of a controller for a cheap cnc3028 machine
66 parts13 - 2 layers99.1 × 78.7 mm
- 2 layers99.5 × 67 mm
Controller Board
kairobyte/bipedal_self_balance
A bipedal self balancing robot with 2DOF in each leg. Built from scratch.
23 parts7MIT - 2 layers99.7 × 99.7 mm
- 2 layers136 × 52 mm
Driver
m24h/espcnc
A 3D printer/CNC controller using ESP32 with its DMA/FIFO bufferd I2S port
113 parts3 - 2 layers
Schematics
XasWorks/Notos
Public repository of the Notos robot project of the Kolleg St. Thomas robotics group, 2016/2017
47 parts3GPL-3.0
Questions
How big is the Blinds 2.0 Panel PCB?
It measures 94.5 × 65 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Blinds 2.0 Panel use?
85 parts, built around the A4988 and IFX27001TF V50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Blinds 2.0 Panel KiCad files?
From the CasualCodersProjects/AutoBlinds repository on GitHub, at the commit this page was made from: the board is BlindsHW Rev 2.0/blinds 2.0/blinds 2.0 Panel.kicad_pcb and its schematic BlindsHW Rev 2.0/blinds 2.0/blinds 2.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Blinds 2.0 Panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask CasualCodersProjects before reusing the design.