Skip to the content
2 layers33 × 48.3 mmMonocono, the printed circuit board in 3D

Monocono is a kinetic artwork inspired by Strutturazioni cilindriche virtuali by Giovanni Anceschi (1963 -1966)

Size
33 × 48.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
15
Pads
45
Tracks, vias
65, 0
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
18 Mar 2015
Updated
4 Nov 2015

Overview

Monocono is an open-source printed circuit board by CasaJasmina, from the CasaJasmina/monocono repository on GitHub. It is a 2-layer board of 33 × 48.3 mm with 19 parts on 15 nets, routed with 65 tracks and 0 vias.

It is built around the BS170. Its parts include 4 connectors, 3 resistors, 2 capacitors, 2 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

monocono

Monocono is a kinetic artwork inspired by Strutturazioni cilindriche virtuali by Giovanni Anceschi (1963 -1966)

BOM

ingredientQuantityLINK
Monocono Board1https://github.com/CasaJasmina/monocono/tree/master/pcb
Attiny 45 DIP1http://www.mouser.it/ProductDetail/Atmel/ATtiny45-20PU/?qs=sGAEpiMZZMtkfMPOFRTOlx1CkBXXGWZD
Dip 8 socket1http://www.mouser.it/Search/ProductDetail.aspx?R=DILB8P-223TLFvirtualkey64910000virtualkey649-DILB8P223TLF
USB type B female1https://www.mouser.it/Search/ProductDetail.aspx?R=UE27-BC54-130virtualkey52350000virtualkey523-UE27-BC54-130
10kohm resistor1http://www.mouser.it/Search/ProductDetail.aspx?R=CFR25J10Kvirtualkey20420000virtualkey279-CFR25J10K
220ohm resistor1http://www.mouser.it/Search/ProductDetail.aspx?R=CCF07220RJKE36virtualkey61300000virtualkey71-CCF07220RJKE36
1kohm resistor1http://www.mouser.it/Search/ProductDetail.aspx?R=CCF501K00JKE36virtualkey61300000virtualkey71-CCF501K00JKE36
diode1http://www.mouser.it/Search/ProductDetail.aspx?R=1N4001E-E3%2f54virtualkey61370000virtualkey625-1N4001E-E3%2f54
led1http://www.mouser.it/Search/ProductDetail.aspx?R=LTL-4223virtualkey57820000virtualkey859-LTL-4223
2N7000 Mosfet1http://www.mouser.it/Search/ProductDetail.aspx?R=2N7000TAvirtualkey51210000virtualkey512-2N7000TA
10uF capacitor1http://www.mouser.it/Search/ProductDetail.aspx?R=REA100M1HBK-0511Pvirtualkey21980000virtualkey140-REA100M1HBK0511P
0.1uF capacitor1http://www.mouser.it/Search/ProductDetail.aspx?R=K104Z15Y5VE5TL2virtualkey59420000virtualkey594-K104Z15Y5VE5TL2
100k potentiometer1http://www.mouser.it/ProductDetail/Alpha-Taiwan/RV24AF-10-15R1-A10K-3/?qs=sGAEpiMZZMtC25l1F4XBUzpDXwZPOA8qTEMOIZJXE%252bk%3d
dc motor1http://www.robot-italy.com/it/hobby-motor-gear.html
M3 screws + bolts9http://www.amazon.com/dp/B000NHXP66/ref=biss_dp_t_asn - http://www.amazon.com/100Pcs-Female-Thread-Fastener-Silver/dp/B00GYS1SXU/ref=sr_1_12?s=industrial&ie=UTF8&qid=1445937400&sr=1-12&keywords=m3+bolt
Wooden box1https://github.com/CasaJasmina/monocono/blob/master/construction/monocono_cube.dxf
3d printed stick holder1https://github.com/CasaJasmina/monocono/blob/master/construction/stick_holder.stl
plastick sticks2
black tape1

Parts

19
QtyValueFootprintReferences
2LOGOLOGOG***, G***
1100nFDiscret:C1C1
110kDiscret:R3R3
110kPin_Headers:Pin_Header_Straight_1x03RV1
110uFDiscret:C1C2
11kDiscret:R3R1
1220Discret:R3R2
1ATTINY45-PSockets_DIP:DIP-8__300_ELLIC1
1BS170Discret:TO92Q1
1CONN_01X02Socket_Strips:Socket_Strip_Straight_1x02P3
1CONN_01X04Socket_Strips:Socket_Strip_Straight_1x04P2
1DIODEDiscret:D3D2
1LEDLEDs:LED-5MMD1
1P?Socket_Strips:Socket_Strip_Straight_1x04P1
1USBConnect:USB_BJ1
1VAL**Mounting_Holes:MountingHole_3mm

The 17 most common of 19 parts.

Similar boards

  • 2 layers21.1 × 26.9 mmDemo, the printed circuit board in 3D

    Demo

    easyw/kicadStepUpMod

    kicadStepUp: ECAD to MCAD FreeCAD WorkBench

    16 parts704
  • 2 layers94.6 × 46.1 mmHeaterMeterPI, the printed circuit board in 3D

    HeaterMeterPI

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    66 parts557MIT
  • 2 layers97.1 × 97 mmADX, the printed circuit board in 3D

    ADX

    WB2CBA/ADX

    ADX - Arduino Digital Modes HF Transceiver

    82 parts136
  • 2 layers121 × 68 mmFreeds sanchez, the printed circuit board in 3D

    Freeds sanchez

    pablozg/freeds

    Derivador de energía solar excedente creado por Pablo Zerón, Diseño PCB por Amcalo, Tester original por Aeizoon, Wiki por Zoilo Mora

    42 parts108
  • 2 layers167.6 × 97.5 mmAS3397 proto DIP, the printed circuit board in 3D

    AS3397 proto DIP

    PhysicsDptAngers/polyUAnalog

    Open source, analog and polyphonic synthesizer

    142 parts88MIT
  • 2 layersT41-Main+RF board V012, the printed circuit board in 3D

    T41-Main+RF board V012

    DRWJSCHMIDT/T41

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    255 parts66
  • 2 layers71.1 × 24.1 mmDactyl manuform gimbal, the printed circuit board in 3D

    Dactyl manuform gimbal

    sffubs/dactyl_manuform_gimbal

    Instrutions and designs for building the dactyl-manuform-gimbal keyboard

    20 parts57

Questions

How big is the Monocono PCB?

It measures 33 × 48.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Monocono use?

19 parts, built around the BS170. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Monocono KiCad files?

From the CasaJasmina/monocono repository on GitHub, at the commit this page was made from: the board is pcb/monocono.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Monocono design in my own project?

Its repository states no licence, so its author keeps all rights: ask CasaJasmina before reusing the design.