
FD PCB
CaptainOrangeSparrow/early-fire-detection-classifier
This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning.

This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning. The project is from the University of Texas at Austin's engineering senior design group Spring 2026.
FD PCB is an open-source printed circuit board by CaptainOrangeSparrow, from the CaptainOrangeSparrow/early-fire-detection-classifier repository on GitHub. It is a 2-layer board of 251.3 × 143.9 mm with 183 parts on 142 nets, routed with 974 tracks and 31 vias.
It is built around the ADS1115IDGS, OPA2350UA and MICS-6814. Its parts include 35 resistors, 25 connectors, 21 capacitors, 6 diodes and 4 ICs. It belongs with the sensors and measurement boards of this library.
This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning. The project is from the University of Texas at Austin's engineering senior design group Spring 2026.
Git on the jetson is setup using the SSH key route. Any git actions will not prompt a log in due to the stored SSH deploy key. Pushes will be recorded as have been made by the deploy key. Whoever is registered on the jetson's git config global user.email will show up as the user responsible of a commit at the time of commit.
To change the git config global user:
git config --global user.email [git email here]
When you want to do a COMMIT, change the git config global user email to your git email or sign your first name at the end of your commit message (For example add file -firstname).
Once you attempt to PUSH your changes, you will then be prompted with the following message to provide a passphrase for security (this passphrase is shared among the team members):
Enter passphrase for key '/home/firedistinguisher/.ssh/id_ed25519':
AFTER you finish pushing your changes and making edits, consider running the following command to clear the user.email environment variable so the next developer will be automatically reminded to provide their email when making their commits, thanks!
git config --global --unset user.email
To log onto the jetson from the ECE-LRC servers:
ssh firedistinguisher@localhost -p 2000
To log onto the jetson from the ECE-LRC servers with video forwarding:
ssh firedistinguisher@localhost -p 2000 -Y
To log onto the jetson from your laptop through the ECE-LRC servers to support web-streaming from local host on the jeston to your local browser:
ssh ssh -J eid@mario.ece.utexas.edu -p 2000 firedistinguisher@localhost -L [port]:localhost:[port]
Available CONDA environments:
Please do not modify the base environment.
I2C-testing
This folder contains code to test accessing read-write functionality on the I2C bus using python smbus2 module for various connected devices including the ADC and HDC. Use i2cdetect -r to scan I2C busses for connected devices.
basic-I2C.py sends read and write commands on the i2c busads1115-i2c.py is a class that reads values from the ads1115 moduleshdc3022.py is a class that reads values from the hdc3022 temp and humidity sensorRequires recording conda env.
audio-testing
This folder contains code for testing the MAX98357A Audio Amp for producing audio from the jetson using the I2S protocol.
play-tone.py plays a sine wave for a specified duration and frequencyplay-wav.py plays a wav fileRequires recording conda env.
camera-gui
This folder contains original python gui that was developed to play prerecorded mp4 files. A pyside 6 gui application is used to display the videos and interactive buttons.
camera_gui.ipynb is the original python notebook that was used to develop the initial guicamera_gui.py is the python version of the ipynb notebooktest.txt is a test fileRequires cameragui conda env.
camera-testing
This folder contains tools to view the raw camera streams for RGB and IR cameras. In particular, it contains code for the tc001. The raw camera streams open native openCV windows or host a web stream. NOTE: The tc001 code came from another repo leswright pythermalcam and contains some erroneous temperature decoding code. (That is fixed in the data recording camera module)
readme: This folder comes with its own readme. See readme for more detailsweb-stream-camera.py is the web stream version of stream-camera.py. Note: to use the web-stream, the ssh port forwarding needs to be used. (See web stream ssh command above).Requires cameragui conda env.
data-recording
This is the main data recording software folder. Multi-modal data is recorded and streamed using either a pyside6 gui application, console only mode, or web stream application (recommended). Data is recorded at a default 25 FPS.
Recordings are saved to saved_recordings [dir] and test_recordings [dir] hold recordings that were taken just for testing and are kept for historical purposes.
readme.txt: This folder comes with its own readme. See readme for more detailsrecord.py is the main data recording script```utilities [dir] holds utility modules such as writers, web stream host server, html, javascript, etc. and other helpful utility codeperipherals [dir] holds modules containing classes to read info and interact with connected external devices such as cameras and adcs.saved_recordings [dir] holds saved recordingstest_recordings [dir] holds test recordingsclear_Saved_to_test.py is a helper script to move all recordings in saved_recordings to test_recordingsgstreamer_test.py is a helper script to test using gstreamer to run nvidia hardware optimized camera framesverify-frame-count.py is a helper script to count the number of frames in every mp4 file in a specified directory (does not search child directories)Requires recording conda env.
downloads
The purpose of this folder is to store files in transit (Files that needed to be copied over into or exported out of the jeston).
stream-camera-gui
This folder contains files to stream both RGB and IR camera feeds simultaneously with a more custom gui in a pyside6 application
readme.txt: This folder comes with its own readme. See readme for more details. This readme has details for the rest of the components in the folder and therefore the other contents in the folder won't be listed again here.Requires appgui conda env.
telemetry-display
This folder contains files to stream data to a ST7735 LCD display.
Requires telemetry conda env.
test-files
This folder contains miscellaneous test files.
Thanks, add anything other considerations here if need be.
Michael
| Qty | Value | Footprint | References |
|---|---|---|---|
| 46 | TestPoint | TestPoint:TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +30 |
| 20 | ~ | ECE445L:MountingHole_4_40 | H1, H2, H3, H4, H5, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20 +4 |
| 8 | 10k | Resistor_SMD:R_0805_2012Metric | R15, R16, R17, R18, R28, R29, R30, R31 |
| 8 | 1u | Capacitor_SMD:C_0805_2012Metric | C7, C8, C10, C11, C12, C13, C14, C15 |
| 6 | 18k | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R22, R23, R24 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R3, R4, R6, R8, R35 |
| 6 | 33k | Resistor_SMD:R_0805_2012Metric | R12, R13, R14, R25, R26, R27 |
| 6 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7, J10, J11, J23, J24, J25 |
| 5 | LOGO | Images:FireIcon | G***, G***, G***, G***, G*** |
| 4 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C17, C18, C19, C20 |
| 4 | FerriteBead | Resistor_SMD:R_0603_1608Metric | FB1, FB2, FB3, FB4 |
| 3 | 220u | ECE445L:CP_Radial_Tantal200mil | C1, C2, C3 |
| 3 | 4.7u | ECE445L:CP_Radial_Tantal200mil | C4, C5, C21 |
| 3 | LOGO | Images:FireAlarmIcon | G***, G***, G*** |
| 3 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3 |
| 2 | +3V3 PWR | ECE445L:LED_D5.0mm | D2, D6 |
| 2 | +5V PWR | ECE445L:LED_D5.0mm | D1, D5 |
| 2 | 0 | Resistor_SMD:R_0805_2012Metric | R32, R33 |
| 2 | 2k | Resistor_SMD:R_0805_2012Metric | R7, R34 |
| 2 | 47u | ECE445L:CP_Radial_Tantal200mil | C6, C9 |
| 2 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U1, U4 |
| 2 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J8, J21 |
| 2 | Conn_02x10_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J5, J13 |
| 2 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Vertical | J2, J3 |
| 2 | LOGO | Images:BubblesIcon | G***, G*** |
| 2 | LOGO | Images:Asparagus-h-stretch | G***, G*** |
| 2 | LOGO | Images:BubblesIcon8 | G***, G*** |
| 2 | Motor_Servo | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1, M2 |
| 2 | OPA2350 | ECE445L:DIP-8_W7.62mm_LongPads | U2, U3 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 10u | ECE445L:C_Axial_200mil | C16 |
| 1 | 150k | Resistor_SMD:R_0805_2012Metric | R20 |
| 1 | 15k | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 560k | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Wuerth_6941xx301002 | J1 |
| 1 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J12 |
| 1 | Conn_01x05 | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J19 |
| 1 | Conn_01x07 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J6 |
| 1 | Conn_01x10 | Connector_PinHeader_2.00mm:PinHeader_1x10_P2.00mm_Vertical | J18 |
| 1 | Conn_01x16 | Connector_PinHeader_2.54mm:PinHeader_1x16_P2.54mm_Vertical | J9 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J4 |
| 1 | HDC3022 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J20 |
| 1 | KY-026 Flame Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J17 |
| 1 | LED_1 | ECE445L:LED_D5.0mm | D3 |
| 1 | LED_2 | ECE445L:LED_D5.0mm | D4 |
| 1 | LOGO | Images:FireAlarmIconSmall | G*** |
| 1 | LOGO | Images:TempHumIcon | G*** |
| 1 | LOGO | Images:Asparagus-quarter-size | G*** |
| 1 | MQ-138 Gas Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J16 |
| 1 | MQ-4 Gas Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J14 |
| 1 | MQ-7 Gas Sensor | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J15 |
| 1 | MiCS-6814 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J22 |

CaptainOrangeSparrow/early-fire-detection-classifier
This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning.

CaptainOrangeSparrow/early-fire-detection-classifier
This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning.

CaptainOrangeSparrow/early-fire-detection-classifier
This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning.

CaptainOrangeSparrow/early-fire-detection-classifier
This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning.

CaptainOrangeSparrow/early-fire-detection-classifier
This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning.

CaptainOrangeSparrow/early-fire-detection-classifier
This repository aims to detect fires at an early stage and classify the type of fire using sensor-fusion techniques and machine learning.

jdexyz/SimpleAirQualitySensor
A simple air quality sensor using the Adafruit MagTag e-ink display

jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.


esden/mcHF-kicad
This repository contains the KiCad import of the Altium design files for the mcHF QRP radio.


ATK-1/SeniorDesign_SwanGanz
The contributors to this senior design project were Nathan DeLaRosa, Ashton Knecht, Jack Son, and Jerry Xia under the supervision of Dr. Jonathan Valvano.

brnna05/senior-design-strength-training
Senior Design project for ECE 364D - Fitness wearable for strength training

It measures 251.3 × 143.9 mm and has 2 copper layers, 1.6 mm thick.
183 parts, built around the ADS1115IDGS, OPA2350UA and MICS-6814. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CaptainOrangeSparrow/early-fire-detection-classifier repository on GitHub, at the commit this page was made from: the board is hw/KiCAD/FD_PCB_SB_With_Peninsula/FD_PCB.kicad_pcb and its schematic hw/KiCAD/FD_PCB/FD_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CaptainOrangeSparrow before reusing the design.