

BLDC Motor Driver
2kW BLDC Motor Driver Firmware Development and KiCAD design
- Size
- 126.7 × 121.3 mm
- Copper layers
- 2
- Thickness
- 2.19 mm
- Parts
- 123
- Nets
- 114
- Pads
- 415
- Tracks, vias
- 889, 171
- Pours
- 85
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 May 2025
- Updated
- 11 Jun 2025
Overview
BLDC Motor Driver is an open-source printed circuit board by CanGulmez, from the CanGulmez/BLDC-Motor-Driver repository on GitHub, published under the MIT licence. It is a 2-layer board of 126.7 × 121.3 mm with 123 parts on 114 nets, routed with 889 tracks and 171 vias.
It is built around the TJA1051T/3/1, IRS2184PBF and LM5164DDA, with the TPS5430DDA, AMS1117-3.3 and USBLC6-2SC6 among its other parts. Its parts include 39 capacitors, 35 resistors, 12 ICs, 10 connectors and 5 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
10TJA1051T/3/1
-- CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversIRS2184PBF
PDIP-8-40℃~+150℃ 1.8A 1.9A 10V~20V 1mA 2 20ns 40ns Enable shutdown、Interleaved conduction protection、Dead-time control Half-Bridge IGBT、MOSFET PDIP-8 Gate Drivers ROHSInfineon TechnologiesGate Drive ICsLM5164DDA
SOIC8100-V Input, 1-A Synchronous Buck DC/DC Converter with Ultra-low IQTexas InstrumentsUncategorisedTPS5430DDA
ESOP-8-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)IRFB4110PBF
TO-220-55℃~+175℃ 1 N-channel 100V 180A 210nC@10V 250pF 370W 4.5mΩ@10V 4V 670pF 9.62nF N-Channel TO-220 MOSFETs ROHSInfineon TechnologiesMOSFETs1N4148WS
SOD-3231.25V@150mA 100V 150mA 1uA@75V 200mW 2A 4ns Independent SOD-323 Switching Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Switching DiodesB340A-13-F-MS
SMA-65℃~+125℃ 1 Independent 1mA 3A 40V 700mV@2A SMA Schottky Diodes ROHSMSKSEMISchottky DiodesEG1218
插件-20℃~+70℃ 11.6mm 200mA 30V 4mm 7.4mm Black PC Pin Rectangular Columnar SPDT Through Hole Plugin Slide Switches ROHSE-SwitchSlide Switches
README
README.md2kW BLDC Motor Driver
This project was created for Teknofest - Efficiency Challenge Competition
This repository consists of two part. First is the motor dirver firmware and second is the KiCAD design. In firmware development, I've used VS Code and PlatformIO plugin. PCB design is based on STM32F44RE microcontroller so that the firmware was written with STM32 HAL (Hardware Abstraction Layer) library. KiCAD design includes both schematic and PCB layout so that it can be used directly.
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 4.7 | Resistor_SMD:R_0603_1608Metric | R10, R11, R12, R13, R16, R17, R18, R19, R22, R23, R24, R25 |
| 12 | IRFB4110PBF | Package_TO_SOT_THT:TO-220-3_Vertical | MOSFET1, MOSFET2, MOSFET3, MOSFET4, MOSFET5, MOSFET6, MOSFET7, MOSFET8, MOSFET9, MOSFET10, MOSFET11, MOSFET12 |
| 8 | 2.2uF | Capacitor_SMD:C_0805_2012Metric | C6, C11, C12, C17, C18, C24, C25, C31 |
| 6 | 220uF | Capacitor_SMD:C_Elec_10x10.2 | C14, C15, C20, C22, C26, C27 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C7, C8, C9 |
| 5 | 10uF | Capacitor_SMD:C_0805_2012Metric | C28, C29, C30, C37, C39 |
| 4 | 100 | Resistor_SMD:R_0603_1608Metric | R5, R14, R20, R26 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R3, R4, R7, R32 |
| 3 | 0.001 | Resistor_SMD:R_2512_6332Metric | R15, R21, R27 |
| 3 | 1N4148WS | Diode_SMD:D_SOD-323 | D2, D3, D4 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C10, C16, C21 |
| 3 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C13, C19, C23 |
| 3 | AD8418 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U7, U9 |
| 3 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J6, J7, J8 |
| 3 | IRS2184 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4, U6, U8 |
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H2, H3, H4 |
| 3 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal | J2, J3, J10 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 22 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 453k | Resistor_SMD:R_0603_1608Metric | R33, R34 |
| 2 | 47uF | Capacitor_SMD:C_Elec_6.3x5.4 | C33, C38 |
| 1 | 0.01uF | Capacitor_SMD:C_0402_1005Metric | C32 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 15uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 2.2k | Resistor_SMD:R_0603_1608Metric | R29 |
| 1 | 2.2nF | Capacitor_SMD:C_0402_1005Metric | C34 |
| 1 | 3.3nF | Capacitor_SMD:C_0402_1005Metric | C36 |
| 1 | 31.6k | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 49.9K | Resistor_SMD:R_0603_1608Metric | R35 |
| 1 | 565790576 | 565790576:56579-0576_MOL | J1 |
| 1 | 56pF | Capacitor_SMD:C_0402_1005Metric | C35 |
| 1 | 68uH | Inductor_SMD:L_0805_2012Metric | L2 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U12 |
| 1 | B340A-13-F | B340A-13-F:DIOM5226X240N | D5 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J5 |
| 1 | EG1218 | digikey-footprints:Switch_Slide_11.6x4mm_EG1218 | S1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LM5164DDA | Package_SO:HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias | U11 |
| 1 | LOGO | logos:teknofest_logo | G*** |
| 1 | STM32F446RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1 |
| 1 | Screw_Terminal_01x06 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_Horizontal | J4 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | TPS5430DDA | Package_SO:TI_SO-PowerPAD-8_ThermalVias | U10 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0805_2012Metric | 10k1 |
| 1 | USBLC6-2SC6 | USBLC6-2SC6:SOT95P280X145-6N | U1 |
Similar boards
- 4 layers50 × 50 mm

- 2 layers32.1 × 50 mm

Bike voltage regulator rectifier
indoor-industry/bike_voltage_regulator-rectifier
Schematic, PCB and case of a regulator-rectifier for batteryless single-wire stator motorbikes
29 parts - 2 layers115 × 85.1 mm

ELV1 revision
omerikinci/ELV1
Elektronik kör yük (electronic dummy load) cihazının ilk stabil versiyonu. 150 W ile sınırlandırılmış, 30 V / 10 A aralığını destekler.
228 parts - 2 layers100 × 100 mm

PCB Conversor
LManuC/ProyectoFinal-Grupo5-VariadorDeFrecuencia
Variador de frecuencia para motores de 1/3HP trifásicos de 0-500Hz
90 parts - 2 layers174.2 × 115 mm

12-Channel Ejection Controller
sihyun-noh/zephyr_485toSDI12
Zephyr RTOS 기반 Dajilog MCU 장비의 firmware, custom board 정의, 공통 component, KiCad hardware source를 함께 관리하는 repository입니다.
300 partsApache-2.0 - 4 layers162 × 115 mm

Fome mc
halbritt/fome-mc
FOME-MC integrated single-PCB motorcycle ECU (STM32H753 + 2x STM32F042 WBO)
514 parts1 - 2 layers120 × 60 mm

Power module skiff
dwmorrin/power-module-skiff
This is a medium sized power module for $\pm$12 V and +5 V.
55 parts - 4 layers135 × 82.5 mm

Questions
How big is the BLDC Motor Driver PCB?
It measures 126.7 × 121.3 mm and has 2 copper layers, 2.19 mm thick.
What parts does the BLDC Motor Driver use?
123 parts, built around the TJA1051T/3/1, IRS2184PBF, LM5164DDA and TPS5430DDA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BLDC Motor Driver KiCad files?
From the CanGulmez/BLDC-Motor-Driver repository on GitHub, at the commit this page was made from: the board is KiCAD/BLDC Motor Driver.kicad_pcb and its schematic KiCAD/BLDC Motor Driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BLDC Motor Driver design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).