6 layers235.1 × 213.7 mm
Quiver PT3 Main PCB rounded
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
164 parts617CERN-OHL-S-2.0
2 layers25.4 × 53.3 mm
QuadCAN FD
Bytewerk/QuadCAN-FD11raspi hat with 4x MCP2517 and 4x TJA1049
- Size
- 25.4 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 65
- Pads
- 220
- Tracks, vias
- 524, 56
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 29 Jun 2018
- Updated
- 12 Sep 2018
Overview
QuadCAN FD is an open-source printed circuit board by Bytewerk, from the Bytewerk/QuadCAN-FD repository on GitHub. It is a 2-layer board of 25.4 × 53.3 mm with 48 parts on 65 nets, routed with 524 tracks and 56 vias.
It is built around the TJA1049T/3J and AT24CS32-SSHM-T. Its parts include 22 capacitors, 14 resistors, 9 ICs, 2 connectors and 1 crystal.
Main components
2
TJA1049T/3J
SO-8-40℃~+150℃ 4.75V~5.25V 5Mbps 5uA 65mA CAN FD Transceiver SO-8 CAN Transceivers ROHSNXP SemiconductorsCAN ICsAT24CS32-SSHM-T
SOIC-8-40℃~+85℃ 1,000,000 cycles 1.7V~5.5V 100 years 1MHz 32Kbit 3mA 5ms 6uA 900ns Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C SOIC-8 EEPROM ROHSMicrochip TechnologyEEPROM
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100nF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22 |
| 8 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R10 |
| 8 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 |
| 4 | MCP2517FD-xSL | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3, U4 |
| 4 | TJA1049T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5, U6, U7, U8 |
| 4 | dnp | Capacitor_SMD:C_0805_2012Metric | R11, R12, R13, R14 |
| 2 | 3K9 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | ASV-20MHz | Oscillator:Oscillator_SMD_Abracon_ASV-4Pin_7.0x5.1mm | X1 |
| 1 | AT24CS32-SSHM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | Raspberry_Pi_2_3 | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J1 |
Similar boards
- 2 layers61.5 × 25 mm
- 4 layers210.6 × 220 mm
CMAIN PCB
Arrow-air/project-caribou
Project Caribou documentation, designs, and project artifacts.
248 parts177CERN-OHL-S-2.0 - 4 layers100 × 100 mm
Flexible audio hub
andrew-bolin/flexible_audio_hub
My ears and speakers will last a lifetime (I hope), but home theatre audio standards do not. My old stereo amplifier works fine, why can't I get an HDMI upgrade module that gives it CEC (control via TV remote).
91 parts8 - 2 layers
- 2 layers
- 2 layers67 × 60.4 mm
ESP32-P4-Hat-2
hermawandiki/Hardware-Design-PT-Waprasta-Global-Teknologi
File desain PCB PT CKB
46 parts - 2 layers65 × 56 mm
Snd lcd rpi hat
romainreignier/snd_lcd_rpi_hat
Hardware files of Supmeca Never Dies LCD Raspberry Pi HAT
40 parts
Questions
How big is the QuadCAN FD PCB?
It measures 25.4 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the QuadCAN FD use?
48 parts, built around the TJA1049T/3J and AT24CS32-SSHM-T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the QuadCAN FD KiCad files?
From the Bytewerk/QuadCAN-FD repository on GitHub, at the commit this page was made from: the board is QuadCAN-FD.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the QuadCAN FD design in my own project?
Its repository states no licence, so its author keeps all rights: ask Bytewerk before reusing the design.