2 layers85 × 85 mm
2 layers85 × 85 mm
LEDTesterV2
BurningElectronics/LEDTesterA simple LED Tester
- Size
- 85 × 85 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 40
- Pads
- 114
- Tracks, vias
- 161, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 May 2026
- Updated
- 25 May 2026
Overview
LEDTesterV2 is an open-source printed circuit board by BurningElectronics, from the BurningElectronics/LEDTester repository on GitHub, published under the MIT licence. It is a 2-layer board of 85 × 85 mm with 28 parts on 40 nets, routed with 161 tracks and 0 vias.
It is built around the LMV722M and IRLZ34N. Its parts include 6 resistors, 4 connectors, 3 capacitors, 3 switches and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2README
README.mdLEDTester
Just a simple LED tester that lets you test you LEDs from 0.1mA to (almost) 50 mA. There are two versions of it:
- One uses pushbuttons to control the current
- One uses a 16 position coded switch
In the "Hardware" folder you can find kicad project with relative schematic and pcb design In the "Fabrication" folder you can find Gerber and BOM files In the "Other" folder you can find screenshots and pdf
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 10 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | 10k | Resistor_THT:R_Array_SIP5 | RN1 |
| 1 | 180k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1uF | MyFootprints:Ceramic capacitor THT | C2 |
| 1 | 20k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | 9V | MyFootprints:9VHolder | BT1 |
| 1 | 9V-12V | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Current Select | MyFootprints:SW Coded - MHR-16 | SW3 |
| 1 | IRLZ34N | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | Q1 |
| 1 | LED SMD | LEDtester:1206-0201 | J3 |
| 1 | LED THT | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | LMV722 | Package_DIP:DIP-8_W7.62mm_Socket | U1 |
| 1 | OLED | MyFootprints:OLED_0.96_128x64 | J4 |
| 1 | SW_Push_DPDT | MyFootprints:G-Switch PS-5850A-6PL | SW2 |
| 1 | SW_SPDT | MyFootprints:Switch SPDT - SS12F44G4 | SW1 |
The 22 most common of 28 parts.
More from BurningElectronics/LEDTester
1Similar boards
- 2 layers53.3 × 78.1 mm
Nucleo DAQ Shield
Yarulik/Nucleo_DAQ_Shield
A "shield" PCB that allows the Nucleo-F746ZG to perform data acquisition in an ultrasound system.
36 parts - 2 layers100 × 50 mm
- 2 layers224.8 × 60.3 mm
Deurnode nieuw
Hans-Beerman/Deurnode_ESP32-PoE
KiCad design Deurnode for the MakerSpace Leiden, based on the Olimex ESP32-PoE
38 parts4Apache-2.0 - 2 layers111.3 × 68.1 mm
MKS relay v4
3D-Printing-for-Microfluidics/3D_printer_control
2nd generation 3D printer control software
67 parts3GPL-3.0 - 2 layers
Watch cleaner pcb
DavidJ-Saving-Time/watch-cleaner
So this is a very rough draft of code designed to run on an esp32 to control a watch cleaning machine see this YouTube video https://youtu.be/Opr75n8DbYY I'll be adding to this and making it easier for people to use.
16 parts3MIT - 2 layers31.8 × 114.8 mm
3DWelderPCB
destroyer796/3DWelder
An overbuilt 3D pen that will use a chc pro hotend and custom dc extruder powered by a power tool battery
17 parts3MIT - 2 layers83.8 × 50.8 mm
Shunt charge controller
grillbaer/solar-power-supply
Solar power harvesting for micro controller projects with li-Ion battery and highly efficient charge controller
16 parts3MIT - 2 layers80 × 45 mm
WifiOiler01
volw/wifiOiler
Automatic, distance depending chain oiler for motorbikes with track recording (GPS).
15 parts3GPL-3.0
Questions
How big is the LEDTesterV2 PCB?
It measures 85 × 85 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LEDTesterV2 use?
28 parts, built around the LMV722M and IRLZ34N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LEDTesterV2 KiCad files?
From the BurningElectronics/LEDTester repository on GitHub, at the commit this page was made from: the board is V2_Coded_SW/Hardware/LEDTesterV2/LEDTesterV2.kicad_pcb and its schematic V1_Pushbuttons/Hardware/LEDTesterV1/LEDTesterV1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LEDTesterV2 design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).