

StoreBoard
Information about the Grundy NewBrain
- Size
- 115 × 78 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 31
- Nets
- 80
- Pads
- 237
- Tracks, vias
- 789, 39
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 Aug 2023
- Updated
- 1 Mar 2025
Overview
StoreBoard is an open-source printed circuit board by BrettHallen, from the BrettHallen/Grundy_NewBrain repository on GitHub. It is a 2-layer board of 115 × 78 mm with 31 parts on 80 nets, routed with 789 tracks and 39 vias.
It is built around the 74LS00SC, 74LS04PC and 74LS10PC, with the 74LS112P-E, 74LS32SC and 74LS574N among its other parts. Its parts include 12 capacitors, 9 ICs, 4 connectors and 2 resistors.
Main components
874LS00SC
-0℃~+70℃ 15ns@5V,50pF 2 2.7V 2V 4 4.75V~5.25V 400uA 500mV 74LS 800mV 8mA NAND Gate - Logic Gates ROHSTexas InstrumentsLogic Gates74LS04PC
PDIP-140℃~+70℃ 4.75V~5.25V 6 6.6mA 74LS PDIP-14 InvertersonsemiInverters74LS10PC
PDIP-140℃~+70℃ 3 3.3mA 4.75V~5.25V 74LS Series NAND Gate PDIP-14 Logic GatesonsemiLogic Gates74LS112P-E
--20℃~+75℃ 0ns 15ns@5V,15pF 2 20ns 30MHz 4.75V~5.25V 400uA 74LS Series 8mA 8mA Asynchronous Falling Edge JK-Type Set and Reset - Flip Flops ROHSRenesas ElectronicsFlip Flops74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic Gates74LS574N
-0ns 0℃~+70℃ 1 2.6mA 20ns 24mA 28ns@5V,45pF 35MHz 4.75V~5.25V 74LS Series 8 D-Type Rising Edge Tri-State - Flip Flops ROHSRochester Electronics, LLCFlip FlopsHM62256BLP-7
DIP28DIP28 New Arrivals ROHSHITUncategorisedSN74LS74AD
SOIC-140℃~+70℃ 1 2 20ns 33MHz 4.75V~5.25V 400uA 40ns@5V,15pF 5ns 74LS Series 8mA 8mA Asynchronous Complementary type D-Type Rising Edge Set and Reset SOIC-14 Flip Flops ROHSTexas InstrumentsFlip Flops
README
README.mdGrundy_NewBrain
Hopefully I can contribute something to the community.

My current goal is to re-design the "store board" to use a 32KB SRAM instead of the two banks of 16KB DRAM.
I think this is the last remaining fault in my machine.
Failing ... or succeeding ... that, I'd like to try at a 64KB external SRAM board.
{Fri 15-Sept-2023}
Sent SRAM Store Board prototype for fabrication
{Sat 1-Mar-2025}
Well, what a disaster that was. Fixed my (obvious) mistakes and have sent the updated design for fabrication.
My YouTube video playlist - note, most are my very early videos so probably a bit rough:
https://www.youtube.com/playlist?list=PL5pwokf56wMKPswNvQZJsGPXETtgRD57M
Parts
31| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2, C11, C14, C17, C20, C23, C55, C58, C59 |
| 4 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2, J3, J4 |
| 2 | 150Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R46, R56 |
| 2 | 220pF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C49, C57 |
| 2 | HOLE | MountingHole:MountingHole_3.2mm_M3_Pad | HOLE1, HOLE2 |
| 1 | 10µF 35v | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C28 |
| 1 | 4.7KΩ | Resistor_THT:R_Array_SIP9 | RN54 |
| 1 | 74LS00 | Package_DIP:DIP-14_W7.62mm | U418 |
| 1 | 74LS04 | Package_DIP:DIP-14_W7.62mm | U420 |
| 1 | 74LS08 | Package_DIP:DIP-14_W7.62mm | U419 |
| 1 | 74LS10 | Package_DIP:DIP-14_W7.62mm | U423 |
| 1 | 74LS112 | Package_DIP:DIP-16_W7.62mm | U421 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm | U424 |
| 1 | 74LS574 | Package_DIP:DIP-20_W7.62mm | U2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | TP1 |
| 1 | HM62256BLP | Package_DIP:DIP-28_W15.24mm | U1 |
| 1 | SN74LS74 | Package_DIP:DIP-14_W7.62mm | U422 |
Similar boards
- 2 layers

- 2 layers350 × 224.3 mm

- 2 layers229.9 × 83.8 mm

- 2 layers320 × 150 mm

- 2 layers99.7 × 99.7 mm

- 2 layers100 × 50 mm

Canned ICs-1.2
Jipxmaster/Canned-ICs-1.2
"Chips Enlatados" es un proyecto en la que intento colocar el mayor número de integrados de la serie 7400 en el menor espacio posible.
53 parts - 2 layers279.4 × 203.2 mm

Z180GDC
lynchaj/rhyophyre
Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller
249 parts12 - 4 layers243.8 × 170.2 mm

Questions
How big is the StoreBoard PCB?
It measures 115 × 78 mm and has 2 copper layers, 1.6 mm thick.
What parts does the StoreBoard use?
31 parts, built around the 74LS00SC, 74LS04PC, 74LS10PC and 74LS112P-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the StoreBoard KiCad files?
From the BrettHallen/Grundy_NewBrain repository on GitHub, at the commit this page was made from: the board is Store_Board/Kicad/StoreBoard.kicad_pcb and its schematic Store_Board/Kicad/StoreBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the StoreBoard design in my own project?
Its repository states no licence, so its author keeps all rights: ask BrettHallen before reusing the design.