Skip to the content
2 layers315.6 × 94 mmKeyboard, the printed circuit board in 3D

Keyboards for Amstrad CPC Computers

Size
315.6 × 94 mm
Copper layers
2
Thickness
1.6 mm
Parts
91
Nets
26
Pads
541
Tracks, vias
959, 35
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
2 Sep 2025
Updated
5 Sep 2025

Overview

Keyboard is an open-source printed circuit board by Bread80, from the Bread80/CPC_Keyboards repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 2-layer board of 315.6 × 94 mm with 91 parts on 26 nets, routed with 959 tracks and 35 vias.

Its parts include 74 switches and 4 connectors. It belongs with the keyboards and input and retro computing and games boards of this library.

README

Tactile/README.md

Keyboard for Amstrad CPC Computers

This project is a keyboard suitable for direct connection to an Amstrad CPC. The PCB uses tactile switches which can easily be labelled with suitable legends for the keytops. The current layout is that of an Amstrad CPC6128, but the key matrix is the same across all machines. The only differences are in the connector types and pinouts.

This board has connectors which are compatible with:

  • CPC464 with PCB keyboard (1x20 pin connector)
  • CPC464 with membrane keyboard (2x10 pin connectors)
  • CPC664 (1x20 pin connector) Untested
  • CPC6128 (2x10 pin connectors)

Plus machines: I'm not clear whether they use the same keyboard pinout or not. As such I can't say whether this board works with them or not.

Sadly it's not practical to add mounting holes suitable for mounting the keyboard on top of the CPC mainboard.

The repository includes an SVG file with key legend. This is suitable for the open source Inkscape software

BoM

74x Key switches[1]: Alps Apline SKHCBEA010. Mouser no: 688-SKHCBEA010 74x Keytops + Keycaps[2][3]: Alps Alpine SK2AA00090. Mouser: 688-SK2AA00090 'Standard pin header' (2.54mm spacing)[4] 2x Shunts[4] Connector(s) (to keyboard)[5] Connector(s) (to CPC)[6] Cable (keyboard to CPC)[7] 5x Standoffs, short)[8]: 13mm length, M3 x 0.5, 4.5mm OD, female/female. Mouser: M1260-3005-SS 5x Standoffs, long)[8]: 25mm, M3 x 0.5, 4.5mm OD, female/female. Mouser: 761-M1272-3005-SS 10x Screws[8]: M3 x 6mm. Mouser: 534-9191-3 --also-- key legend (printout)[9]

Notes:

Mouser codes can be used at http://mouser.com [1] PCB will accept any generic 12mm 'tactile switch'. The specified model allows a keytop + keycap to be attched. This enables a printed key legend to be used. The same design is available engineered for 'operating force' values. In my tests this model had the best feel. [2] Other colours are available (for the keytops), product codes SK2AA000x0 where x is 6,7,8,9 (NOTE: other digits are different products!). [3] This product code includes both keycap and keytop. These are also available separately, but the combined pack is slightly cheaper. Consult the keyswitch data sheet for the full list of available options: https://www.mouser.co.uk/datasheet/2/15/SKHC-1370786.pdf

[4] For configuration jumpers. Source from ebay etc for sensible pricing. If you don't intend to change settings you can solder an offcut of wire instead. [5] Unless you need to attach multiple machines your best option here is to directly solder wire to the board. Otherwise pin header is probably the most convenient. You'll either need 1x20 or 2x10 depending on the machine, plus [6] Options here depend on your machine. The 20-pin inline connect machines will accept 'Dupont' style connectors, pin header etc. The 2x10 matrix connectors are more of a pin. I've successfully used FPC/FFC cable. With some patience this can be persuaded into the connector. These cables only seem to be available in very short lengths but ribbon (etc) cable can be soldered to the other end to run to the keyboard. Obviously some insulation will be helpful on the joins to prevent it shorting against anything (or each other)! You'll need 2x 10-pin cables, 571-FSN-21A-10 is a suitable Mouser product code. [7] Discreet cables or a length or ribbon cable is up to you. Not every line is connected but using a 20pin or 2x 10-pin ribbon cable saves you having to etsablish which aren't needed. Cable length is up to you but anything too short will make it difficult to position the keyboard where you want it. I'd suggest a /minimum/ of about eight inches (40cm). [8] I use standoffs as feet to lift to board of the desk and give space for the wiring underneath. You can give the keyboard some 'raking' by using longer ones at the rear. another option is to use a male/female standoff as an extender. The board is engineered for M3 screws/threads. Note: The PCB has three rows of mounting holes but the central row has not proved necessary and I'll remove them if I do an update. Just use the top and bottom rows. [9] Provided as an SVG suitable for Inkscape) in this here repository. If creating your own key legend, each key needs to be a maximum 10mm x 10mm

Known Issues

  • The keyswitches have a pair of small lugs on the underside. Fitting them would be easier if the board had siutable holes for them. As is it just needs some care to ensure each switch sits flag and true.

Assembly guide

Soldering:

  • Pin header. Solder the pin header strips for the settings jumpers. Pin header can easily be snapped into short sections as needed.
  • Start with the keyswitches. Mount them any way which fits the holes and you'll be okay! Note that there are small lugs on the underside which make them want to sit at an angle. I /strongly/ recommend taking some care to check they are sitting flat and level. My method is to solder a single leg on each, then inspect and rework as needed to level them. Once they're level solder the remaining pins.
  • Connectors. Solder your preference of connector(s), or wire, to the rear of the board. The required connectors are as follows: For a CPC464 with PCB keyboard: connector J1 (1x20 pin) For a CPC464 with matrix keyboard: connectors J2 and J3 (2 of 1x10 pin) For a CPC664: connector J4 (1x20 pin) For a CPC6128: connectors J2 and J3 (2 of 1x10 pin)

Keycaps:

  • Print out the key legend sheet and cut up. Cutting as accurately to the lines as possible will be beneficial. If you have them available, using a cutting board, craft knife, and steel ruler will probably give a better finish than scissors.
  • Before assembling the key top + key legend + key cap consult the assembly diagram at the bottom of page three of the datasheet: https://www.mouser.co.uk/datasheet/2/15/SKHC-1370786.pdf Note the recommended orientation of keytop to keycap and plan which way you'll need to assemble things so your legend ends up the correct way around!
  • With the keycap (clear plastic piece) face down on the bench, insert the key legend (paper) face down. Then insert the keytop into the keycap, taking note of the corrent orientation with respect to the key legend.
  • Attach the keytop/keycaps to the keyswitches.

Configuration and Connection

All the connectors are orientated in the same way as those on the Amstrad motherboard. I.e. the pin(s) towards the top of rear of the keyboard PCB are those towards the rear of the motherboard PCB and, for the the dual 10-pin connectors, the right-most connector on the keyboard PCB (when viewed from the top) connects to the right-most connector on the motherboard PCB.

Configuration is only needed if using the pair of 10-pin connectors to connect to the motherboard. If connecting to a CPC464, short (with a 'shunt') JP2 and the left-most two pins of JP1. If connecting to a CPC6128 short JP3 and the two right-most pins of JP1. Note that when connecting to a CPC464 JP3 should be left open, when connecting to a CPC6128 JP2 should be left open.

Keyboard legend file(s)

Keyboard legend files are in the 'legend' folder. The following designs/layouts are available. SVG files can be created, edited and printed with the open source Inkscape software. If you create anything new/interesting please contribute it back to the repository.

UK-CPC6128-with-464-colours.svg - Amstrad CPC6128 layout with UK legend using the colour scheme of an original Amstrad CPC464.

Licence

My aim with this project is to share something potentially useful with the community but I don't want to see my work being exploited for profit.

Therefore, it's okay to have a board manufactured for your own use and sell off the spare boards for an amount to cover your costs and postage. If you want to sell boards, or derivatives, for profit or as part of a business then talk to me first.

Contact

Website: https://bread80.com Github: https://github.com/Bread80 Mastodon: https://mstdn.social/@bread80 Twitter: https://twitter.com/bread80com

Parts

91
QtyValueFootprintReferences
10MountingHoleMountingHole:MountingHole_3.2mm_M3_DIN965H1, H2, H3, H4, H5, H11, H12, H13, H14, H15
2ENTERCPCKeyboard:SKHCBEA010SW6, SW18
2Jumper_NC_SmallConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP2, JP3
2SHIFTCPCKeyboard:SKHCBEA010SW21, SW121
1, <CPCKeyboard:SKHCBEA010SW39
1- =CPCKeyboard:SKHCBEA010SW25
1.CPCKeyboard:SKHCBEA010SW7
1. >CPCKeyboard:SKHCBEA010SW31
1/ ?CPCKeyboard:SKHCBEA010SW30
10CPCKeyboard:SKHCBEA010SW15
10 _CPCKeyboard:SKHCBEA010SW32
11CPCKeyboard:SKHCBEA010SW13
11 !CPCKeyboard:SKHCBEA010SW64
12CPCKeyboard:SKHCBEA010SW14
12 "CPCKeyboard:SKHCBEA010SW65
13CPCKeyboard:SKHCBEA010SW5
13 #CPCKeyboard:SKHCBEA010SW57
14CPCKeyboard:SKHCBEA010SW20
14 $CPCKeyboard:SKHCBEA010SW56
1464 PCB (Inline)Connector_IDC:IDC-Header_2x10_P2.54mm_VerticalJ3
15CPCKeyboard:SKHCBEA010SW12
15 %CPCKeyboard:SKHCBEA010SW49
16CPCKeyboard:SKHCBEA010SW4
16 &CPCKeyboard:SKHCBEA010SW48
1664 (Inline)Connector_IDC:IDC-Header_2x10_P2.54mm_VerticalJ4
17CPCKeyboard:SKHCBEA010SW10
17 'CPCKeyboard:SKHCBEA010SW41
18CPCKeyboard:SKHCBEA010SW11
18 (CPCKeyboard:SKHCBEA010SW40
19CPCKeyboard:SKHCBEA010SW3
19 )CPCKeyboard:SKHCBEA010SW33
1: *CPCKeyboard:SKHCBEA010SW29
1; +CPCKeyboard:SKHCBEA010SW28
1@ |CPCKeyboard:SKHCBEA010SW26
1ACPCKeyboard:SKHCBEA010SW69
1BCPCKeyboard:SKHCBEA010SW54
1CCPCKeyboard:SKHCBEA010SW62
1CAPSCPCKeyboard:SKHCBEA010SW70
1CLRCPCKeyboard:SKHCBEA010SW16
1COPYCPCKeyboard:SKHCBEA010SW9
1CPC ModularConnector_IDC:IDC-Header_2x10_P2.54mm_VerticalJ2
1CTRLCPCKeyboard:SKHCBEA010SW23
1DCPCKeyboard:SKHCBEA010SW61
1DELCPCKeyboard:SKHCBEA010SW79
1DOWNCPCKeyboard:SKHCBEA010SW2
1ECPCKeyboard:SKHCBEA010SW58
1ESCCPCKeyboard:SKHCBEA010SW66
1FCPCKeyboard:SKHCBEA010SW53
1GCPCKeyboard:SKHCBEA010SW52
1HCPCKeyboard:SKHCBEA010SW44
1ICPCKeyboard:SKHCBEA010SW35
1JCPCKeyboard:SKHCBEA010SW45
1Jumper_3_OpenConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJP1
1KCPCKeyboard:SKHCBEA010SW37
1LCPCKeyboard:SKHCBEA010SW36
1LEFTCPCKeyboard:SKHCBEA010SW8
1MCPCKeyboard:SKHCBEA010SW38
1Membrane 464/6128Connector_IDC:IDC-Header_2x10_P2.54mm_VerticalJ1
1NCPCKeyboard:SKHCBEA010SW46
1OCPCKeyboard:SKHCBEA010SW34
1PCPCKeyboard:SKHCBEA010SW27
1QCPCKeyboard:SKHCBEA010SW67
1RCPCKeyboard:SKHCBEA010SW50
1RIGHTCPCKeyboard:SKHCBEA010SW1
1SCPCKeyboard:SKHCBEA010SW60
1SPACECPCKeyboard:SKHCBEA010SW47
1TCPCKeyboard:SKHCBEA010SW51
1TABCPCKeyboard:SKHCBEA010SW68
1UCPCKeyboard:SKHCBEA010SW42
1UPCPCKeyboard:SKHCBEA010SW0
1VCPCKeyboard:SKHCBEA010SW55
1WCPCKeyboard:SKHCBEA010SW59
1XCPCKeyboard:SKHCBEA010SW63
1YCPCKeyboard:SKHCBEA010SW43
1ZCPCKeyboard:SKHCBEA010SW71
1[CPCKeyboard:SKHCBEA010SW17
1\CPCKeyboard:SKHCBEA010SW22
1]CPCKeyboard:SKHCBEA010SW19
1^ £CPCKeyboard:SKHCBEA010SW24

More from Bread80/CPC_Keyboards

1
  • 2 layers391.4 × 136.8 mmKeyboard, the printed circuit board in 3D

    Keyboard

    Bread80/CPC_Keyboards

    Keyboards for Amstrad CPC Computers

    181 parts3CERN-OHL-P-2.0

Similar boards

  • 2 layers237.5 × 102.9 mmAlu, the printed circuit board in 3D

    Alu

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    91 parts301Unlicense
  • 2 layers132.5 × 84.8 mmShieldXL M, the printed circuit board in 3D

    ShieldXL M

    okyeron/shieldXL

    A rework/remix of the monome norns shield

    91 parts179GPL-3.0
  • 2 layers100 × 68 mmSI4684 SMD, the printed circuit board in 3D

    SI4684 SMD

    PE5PVB/SI4684-DAB-Receiver

    SI4684 ESP32 DAB Receiver

    91 parts135GPL-3.0
  • 2 layers160 × 99.5 mmSupply Board, the printed circuit board in 3D

    Supply Board

    jherkenhoff/STM

    DIY scanning tunneling microscope (STM)

    91 parts88
  • 2 layers213 × 60 mmVController main board, the printed circuit board in 3D

    VController main board

    sixeight7/VController_v3

    Production model of the VController, VC-mini and VC-touch

    91 parts80
  • 2 layers301.6 × 116.9 mmOpus, the printed circuit board in 3D

    Opus

    cfbender/keyboards

    A collection of all of my keyboard projects

    91 parts64MPL-2.0
  • 2 layers89 × 123.4 mmNsec badge-2025, the printed circuit board in 3D

    Nsec badge-2025

    nsec/nsec-badge

    Software from the NorthSec badge

    91 parts62
  • 2 layers167 × 122.8 mmBoardv3, the printed circuit board in 3D

    Boardv3

    compressionKeyboards/compression4c

    This repo contains the files to order a custom PCB for (4c), checkout the zmk layout to build firmware!

    91 parts60

Questions

How big is the Keyboard PCB?

It measures 315.6 × 94 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Keyboard use?

91 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Keyboard KiCad files?

From the Bread80/CPC_Keyboards repository on GitHub, at the commit this page was made from: the board is Tactile/Keyboard.kicad_pcb and its schematic Keyswitch_CPC464_SMT/Keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Keyboard design in my own project?

Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).