
ShakeMe
ahmadjamal789/ShakeMe
A handheld motion-reactive display where particles in a virtual solvent settle at rest and disperse when shaken, driven by an IMU and rendered on a color TFT.

Auv pcb is an open-source printed circuit board by BodhiDavis, from the BodhiDavis/reef_runners_circuitry repository on GitHub. It is a 2-layer board with 22 parts on 56 nets.
It is built around the TPS56637RPAR and SC0917. Its parts include 9 resistors, 6 ICs, 5 capacitors, 1 transistor and 1 inductor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | ~ | esc:esc | U3, U4, U5, U6 |
| 1 | 1.669 mOhm | Resistor_SMD:R_0508_1220Metric | R1 |
| 1 | 10 kOhm | Resistor_SMD:R_0508_1220Metric | R8 |
| 1 | 100 kOhm | Resistor_SMD:R_0508_1220Metric | R4 |
| 1 | 100 nF | Capacitor_SMD:C_1210_3225Metric | C3 |
| 1 | 100 pF | Capacitor_SMD:C_1210_3225Metric | C4 |
| 1 | 100nF | Capacitor_SMD:C_1210_3225Metric | C2 |
| 1 | 15uF | Capacitor_SMD:C_1210_3225Metric | C1 |
| 1 | 17.7 mOhm | Resistor_SMD:R_0508_1220Metric | R5 |
| 1 | 1mOhm | Resistor_SMD:R_0508_1220Metric | R2 |
| 1 | 20 kOhm | Resistor_SMD:R_0508_1220Metric | R6 |
| 1 | 280 mOhm | Resistor_SMD:R_0508_1220Metric | R3 |
| 1 | 3.037 mOhm | Resistor_SMD:R_0508_1220Metric | R9 |
| 1 | 3.3 uH | Inductor_SMD:L_1210_3225Metric | L1 |
| 1 | 47 uF | Capacitor_SMD:C_1210_3225Metric | C5 |
| 1 | 73.2 kOhm | Resistor_SMD:R_0508_1220Metric | R7 |
| 1 | SC0917 | SC0917:MODULE_SC0917 | U1 |
| 1 | TPS56637RPAR | TPS56637RPAR:CONV_TPS56637RPAR | U2 |
| 1 | XT60_YELLOW | XT60_YELLOW:AMASS_XT60PB-M | Q1 |

ahmadjamal789/ShakeMe
A handheld motion-reactive display where particles in a virtual solvent settle at rest and disperse when shaken, driven by an IMU and rendered on a color TFT.



Thornbots/Supa-Cap
Rose-Hulman's Thornbot's Electrical Team's Super Capacitor Bank

cacortes694/Avionics-Power-Regulation-Board
Power Regulation Board for the Fresno State SLI Full Scale Avionics Bay

KungfuPancake/longboi
Possibly the longest controller board to control the BoxTurtle AFC

cr1tbit/i2current
The Raison d'être of this board is to be a powerful, extensible, and affordable replacement for hotglueing a random powerbank into your next portable small-scale electronic project.

dmz006/brain-drain
Standalone four-bay (plus M.2) NIST 800-88 disk sanitizer: Raspberry Pi CM5 carrier board, Python service, 3D-printed enclosure
22 parts, built around the TPS56637RPAR and SC0917. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BodhiDavis/reef_runners_circuitry repository on GitHub, at the commit this page was made from: the board is auv_pcb.kicad_pcb and its schematic auv_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BodhiDavis before reusing the design.