

B MC34063A BRK R1.0
Compact DC-DC boost converter module based on the MC34063A switching regulator IC for regulated voltage step-up applications.
- Size
- 40 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 9
- Pads
- 34
- Tracks, vias
- 22, 15
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 May 2026
- Updated
- 26 Aug 2026
Overview
B MC34063A BRK R1.0 is an open-source printed circuit board by Boardoza, from the Boardoza/Boardoza_MC34063AD_DC_DC_Boost_Converter_Module repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 40 × 20 mm with 14 parts on 9 nets, routed with 22 tracks and 15 vias.
It is built around the MC34063AD and HP03W5F2201T5E. Its parts include 5 resistors, 3 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the power and interfaces and adapters boards of this library.
Main components
2MC34063AD
SOIC-80℃~+70℃@(TA) 1 1.25V~40V 1.5A 100kHz 3V~40V Adjustable Boost、Buck Buck、Boost Built-in No SOIC-8 DC-DC Converters ROHSonsemiDC-DC ConvertersHP03W5F2201T5E
0603-55℃~+155℃ 2.2kΩ 200mW 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
README
README.mdBoardoza MC34063A DC-DC Boost Converter Module
The Boardoza MC34063A DC-DC Boost Converter Module is a compact and efficient voltage step-up solution built around the reliable MC34063A switching regulator IC. This module is designed to convert a low DC input voltage into a higher regulated DC output voltage using a boost converter topology. With integrated current limiting and feedback regulation, the board provides stable and dependable power conversion for a wide variety of embedded and electronic applications.
Thanks to its compact PCB design and minimal external component requirement, this module is ideal for powering sensors, portable electronics, battery-operated systems, DIY electronics projects, and industrial control systems. The onboard status LED provides quick visual feedback for output operation, while the regulated switching architecture ensures efficient energy transfer and reduced power loss compared to linear regulator solutions.
| Front Side | Back Side |
|---|---|
![]() | ![]() |
Key Features
- Efficient DC-DC Boost Conversion: Converts low DC input voltages into a stable higher output voltage.
- Regulated Output Control: Maintains consistent output voltage using an internal feedback regulation system.
- Integrated Current Protection: Includes short-circuit current limiting for improved reliability and safer operation.
- Low Component Count: Simplified external circuitry reduces design complexity and improves usability.
- Status LED Indicator: Onboard LED provides quick visual confirmation of output operation.
- Suitable for Multiple Applications: Ideal for embedded systems, DIY electronics, battery-powered devices, and power management projects.
Technical Specifications
Model: MC34063AD
Manufacturer: Boardoza
Manufacturer IC: Texas Instruments
Functions: DC-DC Boost Converter
Converter Topology: Step-Up (Boost) Switching Regulator
Input Voltage: 3 VDC to 12 VDC
Output Voltage: 12 VDC Regulated
Output Current: Up to 800mA
Switching Frequency: Up to 100kHz
Reference Voltage Accuracy: ±2%
Current Limiting: Internal Short-Circuit Current Limiting
Operating Temperature: 0°C to +75°C
Board Dimensions: 40mm x 20mm
Board Pinout
( J1 ) Power Input Connector
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VIN | DC Input Voltage (3 VDC to 12 VDC) |
| 2 | GND | Ground |
( J2 ) Power Output Connector
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | VOUT | Regulated 12 VDC Output |
| 2 | GND | Ground |
Board Dimensions
Step Files
Datasheet
Version History
- V1.0.0 - Initial Release
Support
- If you have any questions or need support, please contact support@boardoza.com
License
Hardware Design
All hardware design files are licensed under Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x02 | 2317 Series:2317-02S_1x02_P2.50mm_Vertical | J1, J2 |
| 1 | 0.22 ohm | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 1.5K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 1.5nF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 100 uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 170uH | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 180 ohm | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 255 ohm | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 330 uF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C2 |
| 1 | DS14W-HT | 1N4148W:SODFL3816X120N | D1 |
| 1 | MC34063AD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
Similar boards
- 2 layers51.5 × 89 mm

- 2 layers70 × 36 mm

Air Purifier Uppatvind
horvathgergo/esp8266-for-uppatvind
Smart controller for IKEA Uppåtvind Air Purifiers
27 parts60GPL-3.0 - 2 layers98 × 40 mm

Air Purifier Fornuftig Switch
horvathgergo/esp8266-for-fornuftig
Smart controller for IKEA Förnuftig Air Purifiers
23 parts31GPL-3.0 - 2 layers116.6 × 93.3 mm

- 2 layers73.9 × 46 mm

- 4 layers282.8 × 122.9 mm

- 2 layers50.8 × 68.6 mm

MCU Board
caipiblack/STM32-CAN-Bus-board
This is an STM32F042K6T6 based board that can be used to build sensors that communicate over a CAN bus
26 parts5GPL-3.0 - 2 layers52.2 × 79 mm

Programmable light
dilshan/programmable-light
Simple time based programmable light controller
55 parts5MIT
Questions
How big is the B MC34063A BRK R1.0 PCB?
It measures 40 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the B MC34063A BRK R1.0 use?
14 parts, built around the MC34063AD and HP03W5F2201T5E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the B MC34063A BRK R1.0 KiCad files?
From the Boardoza/Boardoza_MC34063AD_DC_DC_Boost_Converter_Module repository on GitHub, at the commit this page was made from: the board is hardware files/B-MC34063A-BRK-R1.0.kicad_pcb and its schematic hardware files/B-MC34063A-BRK-R1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the B MC34063A BRK R1.0 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).

