

B ESP01M BRK-01MBR R01
A compact ESP8266-based Wi-Fi module supporting 802.11n (2.4 GHz), UART communication, Station/AP modes, and dual virtual Wi-Fi interfaces for IoT and embedded applications.
- Size
- 20 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 20
- Pads
- 54
- Tracks, vias
- 69, 12
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Feb 2025
- Updated
- 6 Nov 2025
Overview
B ESP01M BRK-01MBR R01 is an open-source printed circuit board by Boardoza, from the Boardoza/Boardoza_ESP-01M_Wi-Fi_Module repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 2-layer board of 20 × 20 mm with 22 parts on 20 nets, routed with 69 tracks and 12 vias.
It is built around the AP2112K-3.3TRG1. Its parts include 4 capacitors, 2 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the radio and wireless and interfaces and adapters boards and the ESP8266 boards of this library.
Main components
1README
README.mdBoardoza ESP-01M Wi-Fi Module
The Boardoza ESP-01M is a compact, high-performance Wi-Fi module based on the ESP8285 chipset, developed by Ai Thinker. It is designed for IoT applications, smart devices, and wireless communication projects, offering a fully integrated 802.11 b/g/n (2.4 GHz) Wi-Fi solution with low power consumption.
The ESP8285 is an enhanced version of the ESP8266, featuring 1MB of embedded flash memory, allowing it to run standalone applications without requiring an external flash chip. The ESP-01M provides dual virtual Wi-Fi interfaces and supports multiple network modes (Station, SoftAP, and Promiscuous mode), making it a highly flexible choice for IoT applications.
Click here to purchase!
| Front Side | Back Side |
|---|---|
![]() | ![]() |
Key Features
- ESP8285 SoC: Fully integrated Wi-Fi solution with 1MB embedded flash.
- 802.11 b/g/n (2.4 GHz) Wi-Fi, supporting speeds up to 72.2 Mbps.
- Supports AT Command Set for simple configuration.
- Low Power Consumption, ideal for battery-operated devices.
- UART Communication, default baud rate up to 4 Mbps.
- Supports Dual Virtual Wi-Fi Interfaces.
- Multiple Network Modes:
- Station Mode (Connects to an Access Point).
- SoftAP Mode (Acts as a Wi-Fi Hotspot).
- Promiscuous Mode (Packet Sniffing & Analysis).
- Compact Design (20x20mm), suitable for space-constrained applications.
Technical Specifications
Model: ESP-01M (Ai Thinker)
Chipset: ESP8285
Embedded Flash Memory: 1MB
Voltage Supply: 3.3V - 5V
Supported I/O Voltage: 3.3V
Functions: Wi-Fi SoC Module
Communication Interface: UART (up to 4 Mbps)
Wi-Fi Standard: IEEE 802.11b/g/n (2.4 GHz)
Max Data Rate: 72.2 Mbps
Network Modes: Station Mode, SoftAP Mode, Promiscuous Mode
Security Protocols: WPA/WPA2
Power Consumption: Low power operation with deep sleep support
Operating Temperature: -20°C to +85°C
Board Dimensions: 20mm x 20mm
Board Pinout
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | 5V | Positive Power Supply |
| 2 | RST | External Reset Signal (Active Low for Reset) |
| 3 | TX | UART Transmit |
| 4 | RX | UART Receive |
| 5 | IO0 | General Purpose I/O 0 |
| 6 | GND | Negative Power Supply |
Board Dimensions
Step Files
Datasheet
Boardoza ESP-01M Datasheet.pdf
Version History
- V1.0.0 - Initial Release
Support
For support and inquiries, contact support@boardoza.com.
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12, TP13 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | AP2112K-3.3TRG1 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Conn_01x06 | ConnectorsBoardoza:2317-06S_1x06_P2.50mm_Vertical | J1 |
| 1 | Conn_02x09_Counter_Clockwise | Connector_Samtec_HLE_SMD:Samtec_HLE-109-02-xxx-DV-BE-A_2x09_P2.54mm_Horizontal | J2 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
Similar boards
- 4 layers16.9 × 119.4 mm

- 6 layers84 × 98 mm

FujiNet-5200-Rev0
FujiNetWIFI/fujinet-hardware
Schematics and design files for FujiNet hardware
145 parts142 - 2 layers25.4 × 54.5 mm

Rpi pico debugger shoe
ShawnHymel/rpi-pico-debugger-shoe
Stackable debugger board for the Raspberry Pi Pico. Solder long headers to this debugger board in order to connect the Pico to it.
49 parts84 - 4 layers83 × 109 mm

- 2 layers26 × 28 mm

- 2 layers223.5 × 160 mm

- 4 layers30 × 30 mm

- 4 layers100 × 100 mm

V25Panel
maholli/SAM32
Feather-sized SAMD51 with M4 core serving as UART bridge to WROOM ESP32
211 parts43
Questions
How big is the B ESP01M BRK-01MBR R01 PCB?
It measures 20 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the B ESP01M BRK-01MBR R01 use?
22 parts, built around the AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the B ESP01M BRK-01MBR R01 KiCad files?
From the Boardoza/Boardoza_ESP-01M_Wi-Fi_Module repository on GitHub, at the commit this page was made from: the board is hardware files/B-ESP01M-BRK-01MBR-R01.kicad_pcb and its schematic hardware files/B-ESP01M-BRK-01MBR-R01.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the B ESP01M BRK-01MBR R01 design in my own project?
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).


