

BusinessCard PCB
This is the necessary files to make your own PCB Business Cards.
- Size
- 88.8 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 41
- Pads
- 222
- Tracks, vias
- 633, 87
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Aug 2025
- Updated
- 13 Aug 2025
Overview
BusinessCard PCB is an open-source printed circuit board by Blender-Guy1, from the Blender-Guy1/Business_Card repository on GitHub, published under the MIT licence. It is a 2-layer board of 88.8 × 50 mm with 90 parts on 41 nets, routed with 633 tracks and 87 vias.
It is built around the 74HC237. Its parts include 64 diodes, 15 resistors, 4 capacitors, 2 ICs and 2 connectors. It belongs with the STM32 boards of this library.
Main components
1Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 64 | L | LED_SMD:LED_0805_2012Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48 |
| 8 | 100 Ω | Resistor_SMD:R_0603_1608Metric | R2, R3, R4, R5, R6, R7, R8, R9 |
| 5 | 1kΩ | Resistor_SMD:R_0603_1608Metric | R10, R11, R13, R14, R15 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C3, C4 |
| 2 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R1, R12 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | SMD Push Button | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 74HC237 | Colin New Footprints:SOT-23-16 Thin | U2 |
| 1 | Active Crystal Oscillator | Colin New Footprints:OSC_ECS-2520S25-250-FN-TR | Y1 |
| 1 | Battery | Colin New Footprints:CR2025 Circuit Board Battery Holder | J1 |
| 1 | Reprogram | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | STM32L010F4Px | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
Similar boards
- 4 layers100 × 100 mm

- 4 layers81.1 × 75 mm

Brs flight computer
Big-Red-Sat/Big-Red-Sat-1
This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.
266 parts6 - 2 layers106.8 × 96.4 mm

Hasp flight computer
Big-Red-Sat/High-Altitude-Student-Platform
This repository contains the hardware designs, data, and analysis of perovskite solar cells on high altitude balloons
292 parts3 - 2 layers33 × 38.1 mm

- 2 layers63.5 × 48.3 mm

SimpleServoCtrl
DavidMFlynn/SimpleServoCtrl16
PIC16F1847 based R/C servo controller, 16 channels.
55 parts1 - 2 layers200 × 70 mm

- 2 layers99.7 × 95.6 mm

- 4 layers213.5 × 128.5 mm

Analog via
starlingcode/analog-via
Designs for an all-analog variant of the VIA meta crossfader
767 parts
Questions
How big is the BusinessCard PCB PCB?
It measures 88.8 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BusinessCard PCB use?
90 parts, built around the 74HC237. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BusinessCard PCB KiCad files?
From the Blender-Guy1/Business_Card repository on GitHub, at the commit this page was made from: the board is BusinessCard_PCB/BusinessCard_PCB.kicad_pcb and its schematic BusinessCard_PCB/BusinessCard_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BusinessCard PCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).