BehrensG/ETH1HMSR-SMS1ETH1HMSR-SMS is a one-channel data acquisition card based on the HMSR-SMS chip. The communication with a PC is over Ethernet. The card supports LAN eXtensions for Instrumentation (LXI) and RAW TCP and UDP connections.
ETH1HMSR SMS is an open-source printed circuit board by BehrensG, from the BehrensG/ETH1HMSR-SMS repository on GitHub. It is a 4-layer board of 100 × 45 mm with 127 parts on 152 nets, routed with 1,022 tracks and 169 vias.
It is built around the LAN8742A-CZ, TSR 1-2450 and OPA4340EA/2K5, with the 24LC08B-E/MS, LM1117MP-3.3/NOPB and 1812L075/33DR among its other parts. Its parts include 51 capacitors, 31 resistors, 11 ICs, 4 diodes and 4 connectors. It belongs with the STM32 boards of this library.
ETH1HMSR-SMS is a one-channel data acquisition card based on the HMSR-SMS chip. The communication with a PC is over Ethernet. The card supports LAN eXtensions for Instrumentation (LXI) and RAW TCP and UDP connections.
Key features of the design include:
3D model rendition for PCB V1.2.
Below are the images for the PCB V1.0. I made some mistakes, but the botch wires fixed them.
The user can mount different HMSR-SMS models for different measurement ranges, those are :
| Model | Nominal current (A) | Measurement range (A) | Supported |
|---|---|---|---|
| HMSR6-SMS | 6 | +/- 15 | YES |
| HMSR8-SMS | 8 | +/- 20 | YES |
| HMSR10-SMS | 10 | +/- 25 | YES |
| HMSR15-SMS | 15 | +/- 37.5 | YES |
| HMSR20-SMS | 20 | +/- 50 | NO |
| HMSR30-SMS | 30 | +/- 75 | NO |
[!NOTE] The limitations is the input connector (Phoenix Contact 1710072), with nominal current of 32 A. For larger current models, the user need to redesign the PCB.
[!NOTE] The prototype has a HMSR6-SMS. Other current models where not tested.
[!TIP] The HMSR-SMS chip is accurate without any additional calibration.
The PCB uses Ethernet to communicate with the PC. The features are :
LAN eXtensions for Instrumentation (LXI) is a standard for connecting and controlling test and measurement instruments via Ethernet. It allows for easy integration, remote access, and simplified configuration, enhancing the flexibility and scalability of automated test systems.
[!WARNING]
This device does not guarantee full compliance with the LXI standard. The implementation was based on available documentation and observations of an LXI-compliant device.
[!TIP] To use the LXI features the user needs to use a VISA API. In the examples below, the R&S VISA Tools where uses.
Device autodetect with multicast DNS (mDNS).
Support for High Speed LAN Instrument Protocol (HiSLIP).
Web interface
[!WARNING] The website was tested only with Google Chrome Browser.
Device Home Page
Device Network Setup
Device Control
Device Help
Device Service
Using netcat
Using putty
[!WARNING] The RAW UDP connection is not part of the LXI standard, it is device specific.
Using netcat
| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 0.1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C302, C308, C309, C310, C311, C312, C401, C403, C404, C405, C406, C407, C409, C410, C411, C415 +9 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R301, R303, R401, R404, R502, R504, R505 |
| 7 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C305, C306, C307, C402, C408, C412, C414 |
| 6 | 0 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R402, R403, R405, R408, R506, R515 |
| 4 | 8p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C301, C304, C416, C417 |
| 4 | Fiducial | Fiducial:Fiducial_1.5mm_Mask3mm | FID101, FID102, FID103, FID104 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R201, R202, R501 |
| 3 | 100k/0.1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R507, R508, R511 |
| 3 | 22u | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C203, C205, C506 |
| 3 | 4n7 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C509, C510, C511 |
| 3 | 742792031 | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB301, FB401, FB501 |
| 2 | 258k/0.1% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R509, R510 |
| 2 | 2u2 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C419, C420 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R406, R407 |
| 2 | 560 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R305, R306 |
| 2 | DNP | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C413, C512 |
| 2 | M3 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H103, H104 |
| 2 | M3 | MountingHole:MountingHole_3.2mm_M3_DIN965 | H101, H102 |
| 2 | MPMT2003AT5 | Package_TO_SOT_SMD:SOT-23 | RN501, RN502 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C204 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C418 |
| 1 | 10u/50V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C201 |
| 1 | 12k1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R304 |
| 1 | 1710072 | ETH1HMSR-SMS:1710072 | J501 |
| 1 | 1715721 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J201 |
| 1 | 180k/0.05% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R512 |
| 1 | 1812L075/33DR | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F201 |
| 1 | 18k/0.05% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R513 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D202 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R302 |
| 1 | 20021111-00010T4LF | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical | J401 |
| 1 | 24LC08B-E/MS | Package_SO:MSOP-8_3x3mm_P0.65mm | U404 |
| 1 | 2k/0.05% | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R514 |
| 1 | 30k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R503 |
| 1 | 470p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C303 |
| 1 | 4u7/50V | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C202 |
| 1 | 960-19-12-S-AB-0 | ETH1HMSR-SMS:960-19-12-S-AB-0 | HS101 |
| 1 | ASMB-MTB1-0B3A2 | LED_SMD:LED_Avago_PLCC4_3.2x2.8mm_CW | D401 |
| 1 | BAV199 | Package_TO_SOT_SMD:SOT-23 | D501 |
| 1 | BZX84C10LT1G | Package_TO_SOT_SMD:SOT-23 | D201 |
| 1 | DG412LEDQ | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U503 |
| 1 | DG419LEDY | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U504 |
| 1 | EXB-38V510JV | Resistor_SMD:R_Array_Concave_4x0603 | RN303 |
| 1 | EXB-V8V102JV | Resistor_SMD:R_Array_Concave_4x0603 | RN401 |
| 1 | EXB-V8V103JV | Resistor_SMD:R_Array_Concave_4x0603 | RN302 |
| 1 | EXB-V8V330JV | Resistor_SMD:R_Array_Concave_4x0603 | RN301 |
| 1 | HMSR-SMS | ETH1HMSR-SMS:HMSR-SMS | U501 |
| 1 | LAN8742A | Package_DFN_QFN:VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U301 |
| 1 | LM1117MP-3.3/NOPB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U202 |
| 1 | LT6350xMS8 | Package_SO:MSOP-8_3x3mm_P0.65mm | U401 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q202 |
| 1 | NX5032GA-16 | ETH1HMSR-SMS:NX5032GA | Y401 |
| 1 | NX5032GA-25 | ETH1HMSR-SMS:NX5032GA | Y301 |
| 1 | OPA4340EA | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U502 |
| 1 | Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP401 |
| 1 | REF2033AIDDCT | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U402 |
| 1 | RJ45_Wuerth_7499010121A | Connector_RJ:RJ45_Wuerth_7499010121A_Horizontal | J301 |
| 1 | SI5618A | Package_TO_SOT_SMD:SOT-23 | Q201 |
| 1 | STM32H743VITx | Package_QFP:LQFP-100_14x14mm_P0.5mm | U403 |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U201 |
| 1 | Warining Top | ETH1HMSR-SMS:Symbol_Attention_Triangle_8x7mm_Copper | SYM501 |
| 1 | Warning Bottom | ETH1HMSR-SMS:Symbol_Attention_Triangle_8x7mm_Copper | SYM502 |
BehrensG/ETH1ISO224
ETH1ISO224 is a one-channel data acquisition card based on the ISO224 chip. The communication with a PC is over Ethernet. The card supports LAN eXtensions for Instrumentation (LXI) and RAW TCP and UDP connections.
mlab-modules/ADCoctoSPI01
Octal input high-speed ADC with serial LVDS output.
It measures 100 × 45 mm and has 4 copper layers, 0.19 mm thick.
127 parts, built around the LAN8742A-CZ, TSR 1-2450, OPA4340EA/2K5 and 24LC08B-E/MS. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BehrensG/ETH1HMSR-SMS repository on GitHub, at the commit this page was made from: the board is HARDWARE/ETH1HMSR-SMS/ETH1HMSR-SMS.kicad_pcb and its schematic HARDWARE/ETH1HMSR-SMS/Current.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BehrensG before reusing the design.