Skip to the content
2 layers34.3 × 63.5 mmAcmp test fixture, the printed circuit board in 3D

Acmp test fixture

Battosai42/amcp13

Automated measurement of crystal parameters using a vector network analyser

Size
34.3 × 63.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
9
Pads
64
Tracks, vias
27, 0
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
24 Aug 2019
Updated
17 Jun 2020

Overview

Acmp test fixture is an open-source printed circuit board by Battosai42, from the Battosai42/amcp repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 34.3 × 63.5 mm with 26 parts on 9 nets, routed with 27 tracks and 0 vias.

Its parts include 12 resistors, 4 capacitors, 4 connectors and 2 crystals. It belongs with the sensors and measurement boards of this library.

README

README.md

amcp

WORK IN PROGRESS!

ampc is an automated measurement tool of crystal parameters using a vector network analyser.

Gui_Example

Project Description

This Project is intended to automate the measurement of crystals up to about 150MHz using a cheap VNA such as the miniVNA or nanoVNA. The measurement method requires a passive test-fixture according to IEC-444 which is a douple-pi network terminating the crystal at 12.5Ohm.

Feedback

I would be very interessted to hear some feedback from people finding this project interessting, have suggestions or even started using it. Please contact me by mail (git.b42@gmail.com).

Project Status

The calculation of the motional parameters is still not reliable in all cases and special care has to be taken for the measurement setup. Good calibration of the VNA is essential to get Rs right. Also the impedance matching to the crystal is very important as the calculation of the other motional parameters are relying on a goot match.

Software

  • Basic Gui
  • Basic Functions
    • Phase-Shift Method
    • -3dB Bandwidth Method
    • Export as SPICE/Spectre model file (untested)
    • Save/Load Tool Setup
  • Advanced Functions
    • Support Threading
    • Automated VNA setup for easier use
Hardware Support
  • miniVNA tiny
  • nanoVNA
  • Generic Wrapper for other VNAs

Hardware

  • Example Test-Fixture (IEC-444)

Parts

26
QtyValueFootprintReferences
414R2Resistor_SMD:R_0603_1608MetricR3, R4, R9, R10
4158RResistor_SMD:R_0603_1608MetricR1, R6, R7, R12
433nCapacitor_SMD:C_0603_1608MetricC1, C2, C3, C4
466R5Resistor_SMD:R_0603_1608MetricR2, R5, R8, R11
4Conn_CoaxialConnector_Coaxial:SMA_Amphenol_132289_EdgeMountJ1, J2, J3, J4
1AXS-3225-04-02abracon:AXS-2016-04-04Y2
1AXS-3225-04-02abracon:AXS-3225-04-02Y1

The 22 most common of 26 parts.

More from Battosai42/amcp

3
  • 2 layers38.1 × 33 mmAcmp test fixture, the printed circuit board in 3D

    Acmp test fixture

    Battosai42/amcp

    Automated measurement of crystal parameters using a vector network analyser

    15 parts13GPL-3.0
  • 2 layers33 × 58.4 mmHc49s test fixture, the printed circuit board in 3D

    Hc49s test fixture

    Battosai42/amcp

    Automated measurement of crystal parameters using a vector network analyser

    15 parts13GPL-3.0
  • 2 layers38.1 × 50.8 mmAcmp test fixture, the printed circuit board in 3D

    Acmp test fixture

    Battosai42/amcp

    Automated measurement of crystal parameters using a vector network analyser

    10 parts13GPL-3.0

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Acmp test fixture PCB?

It measures 34.3 × 63.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Acmp test fixture use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Acmp test fixture KiCad files?

From the Battosai42/amcp repository on GitHub, at the commit this page was made from: the board is acmp_test_fixture/AXS-socket-variant/acmp_test_fixture.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Acmp test fixture design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).