
Hornbill Open Universal Remote
ExploreEmbedded/hornbill-our
Open Univeral Remote with Hornbill ESP32 dev tools. BLE IR Bridge for device control

Code for my BART display project
NodeMCU2.0 is an open-source printed circuit board by Baaazil, from the Baaazil/Mini-Real-Time-BART-Display repository on GitHub. It is a 2-layer board of 25.4 × 48.3 mm with 39 parts on 41 nets, routed with 342 tracks and 243 vias.
It is built around the CP2102 and S8050. Its parts include 14 resistors, 8 capacitors, 4 ICs, 2 diodes and 2 connectors. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Code for my BART display project + KiCAD files I created
Disclaimer- The I2C connection between the OLED and MCU was not written by me (credit on my website), and the main script was written assisted by a language model. The KiCAD side of this project had no generative tools used as I was learning KiCAD for the first time I did not want to hurt my learning.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 12k | Vowstar_Basic_Device:SMT_R_0402 | R1, R2, R3, R4, R5, R7, R8 |
| 4 | , , , | ||
| 4 | 470 | Vowstar_Basic_Device:SMT_R_0402 | R6, R9, R11, R12 |
| 3 | 100nF | Vowstar_Basic_Device:SMT_C_0402 | C1, C4, C6 |
| 3 | 10uF | Vowstar_Basic_Device:SMT_C_0402 | C3, C5, C8 |
| 2 | S8050 | Vowstar_Basic_Device:SMT_TRIODE_NPN | VT1, VT2 |
| 2 | THT_Male_P_1x15 | Vowstar_Connector:THT_Male_P_1x15-2.54mm | J1, J2 |
| 1 | 0(NC) | Vowstar_Basic_Device:SMT_R_0402 | R10 |
| 1 | 100k(1%) | Vowstar_Basic_Device:SMT_R_0402 | R14 |
| 1 | 100uF TAJB107M006RNJ | Vowstar_Basic_Device:SMT_C_Tantalum_B | C2 |
| 1 | 10uF 25V | Vowstar_Basic_Device:SMT_C_0805 | C7 |
| 1 | 1N5819/SS14/S4(SOD_323) | Vowstar_Basic_Device:SMT_DIODE_SOD_323 | D1 |
| 1 | 220k(1%) | Vowstar_Basic_Device:SMT_R_0402 | R13 |
| 1 | BLUE | Vowstar_Basic_Device:SMT_LED_0603 | LED1 |
| 1 | CP2102 | Vowstar_IC_General:CP2102 | U2 |
| 1 | ESP_12_E | Vowstar_Module:ESP_12_E_L | U1 |
| 1 | KEY_FLASH | Vowstar_Switch:SMT_SW_PTS_820 | S2 |
| 1 | KEY_RST/USER | Vowstar_Switch:SMT_SW_PTS_820 | S1 |
| 1 | Logo_NodeMCU | Vowstar_Module:Logo_NodeMCU_700x992 | Logo1 |
| 1 | NCP1117ST33T3G | Vowstar_IC_General:SOT-223 | U4 |
| 1 | USB_Micro_5S_B | Vowstar_Connector:USB_MICRO_5S_B | U3 |

ExploreEmbedded/hornbill-our
Open Univeral Remote with Hornbill ESP32 dev tools. BLE IR Bridge for device control

ExploreEmbedded/hornbill-lights
Firmware and App for controlling RGB LED lights with the Hornbill ESP32 Platform

microdynamics-robot-quadcopter/breeze_electronics_design
This project is created and managed by EDA softwares, which contains the breeze quadcopter's component library, footprint library, schematic, printed circuit boards, etc.





It measures 25.4 × 48.3 mm and has 2 copper layers, 0.41 mm thick.
39 parts, built around the CP2102 and S8050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Baaazil/Mini-Real-Time-BART-Display repository on GitHub, at the commit this page was made from: the board is KiCAD NodeMCU reference/NodeMCU2.0.kicad_pcb and its schematic KiCAD BARTDisplay/02_ESP12_CORE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Baaazil before reusing the design.