2 layers308.7 × 241.8 mm
OTTOtact
cester-ino/OTTO-hardware
those specs refer to the tactile buttons version, but a led backlight button version is in the works too.
229 parts49GPL-3.0
2 layers50 × 25 mm
Boost Convertor
BRaj36001k/BoostConvertors1#Hardware #PCB #Simulation #Coding #Designing
- Size
- 50 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 11
- Pads
- 49
- Tracks, vias
- 56, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 15 Jun 2026
- Updated
- 9 Aug 2026
Overview
Boost Convertor is an open-source printed circuit board by BRaj36001k, from the BRaj36001k/BoostConvertors repository on GitHub. It is a 2-layer board of 50 × 25 mm with 25 parts on 11 nets, routed with 56 tracks and 4 vias.
It is built around the MT3608 and SS34. Its parts include 10 capacitors, 5 connectors, 4 diodes, 2 resistors and 1 IC.
Main components
2README
README.mdBoost-Converter
A collection of mini projects in hardware design, PCB layout, simulation, and coding.
Projects
Boost Converter
A PCB design for a boost converter circuit built using KiCad.
- Tool: KiCad
- Status: Completed
- Files:
boost-converter/
Tools Used
- KiCad (PCB Design)
Author
B-Raj15 — GitHub
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10u | Capacitor_SMD:C_1206_3216Metric | C3, C4, C5, C6, C7, C8, C9, C10 |
| 4 | SS34 | Diode_SMD:D_SMA-SMB_Universal_Handsoldering | D1, D2, D3, D4 |
| 2 | FB | Inductor_THT:L_Axial_L5.3mm_D2.2mm_P2.54mm_Vertical_Vishay_IM-1 | FB1, FB2 |
| 2 | R | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 1 | 100n | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 220uF/16v | Capacitor_SMD:CP_Elec_8x10 | C2 |
| 1 | GND(IN) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J5 |
| 1 | GND(OUT) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J3 |
| 1 | L_Ferrite | Inductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSoldering | L1 |
| 1 | MT3608 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1 |
| 1 | V+(IN) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J4 |
| 1 | V+(OUT) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J1 |
| 1 | V-(OUT) | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm | J2 |
Similar boards
- 2 layers79.2 × 68.8 mm
Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT - 4 layers83 × 83 mm
PWNSAT
Pwnsat/PWNCUBE
PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research
139 parts29 - 2 layers60 × 40 mm
Forcegauge
szbeni/forcegauge
Traning for climbing. Load cell with HX711 and real time plotting,
77 parts18GPL-3.0 - 2 layers77.2 × 67.9 mm
Transistor tester
vitaliy-bobrov/avr-transistor-tester
Component/Transistor tester based on famous AVR Transistor Tester
66 parts12 - 2 layers61 × 61 mm
ESP32 FC
MAATHES-THILAK-K/ESP32-S3_FLIGHT_CONTROLLER
A custom-designed flight controller based on the ESP32-S3 module, built for compatibility with the esp-fc firmware and Betaflight-like configuration.
69 parts7Apache-2.0 - 4 layers100 × 80 mm
Plc board
denorath-sys/gridnet
Open hardware powerline mesh communication terminal
62 parts5CERN-OHL-W-2.0 - 2 layers65 × 56.5 mm
PiSupply
enwi/PiSupply
Uninterruptable power supply for Raspberry Pi's, which can also power external HDDs
80 parts4LGPL-3.0
Questions
How big is the Boost Convertor PCB?
It measures 50 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Boost Convertor use?
25 parts, built around the MT3608 and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Boost Convertor KiCad files?
From the BRaj36001k/BoostConvertors repository on GitHub, at the commit this page was made from: the board is Boost-Convertor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Boost Convertor design in my own project?
Its repository states no licence, so its author keeps all rights: ask BRaj36001k before reusing the design.