

Receiver pcb
Design files for receiver PCBs.
- Size
- 45 × 85 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 70
- Nets
- 63
- Pads
- 215
- Tracks, vias
- 387, 50
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 9 Sep 2025
- Updated
- 25 Nov 2025
Overview
Receiver pcb is an open-source printed circuit board by Avy-Dawgs, from the Avy-Dawgs/receiver-pcb repository on GitHub. It is a 4-layer board of 45 × 85 mm with 70 parts on 63 nets, routed with 387 tracks and 50 vias.
It is built around the AD8031ARTZ-REEL7, AD5160 and MIC5365-3.3YC5-TR, with the TSW-104-14-F-S among its other parts. Its parts include 33 capacitors, 14 resistors, 11 ICs, 4 connectors and 1 inductor.
Main components
4AD8031ARTZ-REEL7
SOT-23-5-40℃~+85℃ -6V~6V 1 1.5mV 1.6uV/℃ 15mA 15nV/√Hz@1kHz 2.7V~12V 250nA 32V/us 450nA 70dB 800uA 80MHz Rail-to-Rail Input, Rail-to-Rail Output SOT-23-5 Operational Amplifier ROHSAnalog DevicesOperational AmplifierAD5160
UncategorisedANALOGMIC5365-3.3YC5-TR
SC-70-5-40℃~+125℃ 1 150mA 200uVrms 3.3V 310mV@(150mA) 39uA 5.5V 65dB@(10kHz)、80dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SC-70-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTSW-104-14-F-S
插件,P=2.54mm-55℃~+125℃ 1 2.54mm 2.54mm 2.79mm 4P 8.13mm Black Phosphor bronze Pin Header Through Hole Tin 插件,P=2.54mm Pin Headers ROHSSamtecPin Headers
README
README.mdreceiver-pcb
Design files for receiver PCBs.
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4, C10, C12, C15, C16, C18, C19, C26, C29 |
| 5 | 10u | Capacitor_SMD:C_0603_1608Metric | C9, C11, C25, C31, C32 |
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C17, C30, C34 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric | R4, R5, R9, R10 |
| 4 | MountingHole | MountingHole:MountingHole_2mm | H1, H2, H3, H4 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C20, C21, C22 |
| 3 | TSW-104-14-F-S | pin_header_fp:CON4_1X4_TU_TSW | J2, J3, J4 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C27, C28 |
| 2 | 36p | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 68p | Capacitor_SMD:C_0603_1608Metric | C7, C8 |
| 2 | LT1722CS5-TRMPBF | LT172x:S_5_ADI | U1, U6 |
| 2 | TS5A4624DCKR | Mux:DCK6 | U2, U4 |
| 1 | .15u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | .2u | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | 1.33k | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 174k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 22n | Capacitor_SMD:C_0603_1608Metric | C24 |
| 1 | 2k | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 33 | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 3k | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 4.7u | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 4.99k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric | C23 |
| 1 | 50 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 866 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | AD5160 | Package_TO_SOT_SMD:SOT-23-8 | U3 |
| 1 | AD8031ARTZ-REEL7 | AD8031:RJ_5_ADI | U5 |
| 1 | AP63205WU-7 | step_down_converter:SOIC_05WU-7_DIO-M | U9 |
| 1 | CON-SMA-EDGE-S | SMA_male_fp:RFSOLUTIONS_CON-SMA-EDGE-S | J1 |
| 1 | LOGO | Graphics:grapphics | G*** |
| 1 | LOGO | Graphics:uofu | G*** |
| 1 | LT1818IS5-TRMPBF | LT172x:S_5_ADI | U8 |
| 1 | LTC2315CTS8-12-PBF | LTC2315:TSOT-23_TS8_LIT | U7 |
| 1 | MIC5365-3.3YC5-TR | linear_regulator_fp:SC-70_C5_MCH-M | U12 |
| 1 | ~ | Cmod_S7:Cmod_S7 | U10 |
| 1 | ~ | 457k_bp_filter_fp:457k_bandpass_FL | FL1 |
More from Avy-Dawgs/receiver-pcb
1- 2 layers40 × 70 mm

Similar boards
- 2 layers40 × 25 mm

- 2 layers98.1 × 101.3 mm

Climatecontrolpcb
Sharan21-cmd/climate-control-pcb-design
A compact and efficient Climate Control PCB designed for monitoring and regulating temperature and humidity using embedded electronics.
16 parts1 - 4 layers51.5 × 32 mm

Overdrive
kyledenobel/RGA_Boards
PCB Board design and development for RGA (Recording Guitar Amplifier)
44 parts - 4 layers24.4 × 24.4 mm

OSO SWAT C1
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
40 parts2.1k - 4 layers45 × 63.5 mm

- 2 layers335 × 340.9 mm

RCA Radio Telescope
Glaubinator/Radio-Telescope-RCA
Radio Telescope System for 1 GHz to 2 GHz Operation
81 parts3GPL-3.0 - 4 layers80 × 100 mm

Ice40 breakout
RubenVoell/iceduino
The basic idea behind this project is to create a simple breakout of an ICE40 FPGA with some LEDs and Buttons to interact with the FPGA and enough resources to run a simple softcore, like a small RISC-V core.
248 parts3 - 4 layers70 × 30 mm

Usb led controller
kcuzner/usb-led-controller
This is an LED controller for the lights that came with my In-Win A1 Mini-ITX Tower. It came with a simple 12V RGB LED strip, rather than the now-standard WS2812 addressable LED strips that are so common in today's PCs.
115 parts2
Questions
How big is the Receiver pcb PCB?
It measures 45 × 85 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Receiver pcb use?
70 parts, built around the AD8031ARTZ-REEL7, AD5160, MIC5365-3.3YC5-TR and TSW-104-14-F-S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Receiver pcb KiCad files?
From the Avy-Dawgs/receiver-pcb repository on GitHub, at the commit this page was made from: the board is main_board/main_board.kicad_pcb and its schematic antenna_and_lna/antenna_and_lna.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Receiver pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Avy-Dawgs before reusing the design.