
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Spinning light to connect with a power trainer and to show the power zone one is currently in.
Spinning Light is an open-source printed circuit board by ArwedMeinert, from the ArwedMeinert/Spinning-Light repository on GitHub, published under the MIT licence. It is a 2-layer board of 106.7 × 78.7 mm with 30 parts on 42 nets, routed with 224 tracks and 9 vias.
Its parts include 12 connectors, 3 resistors, 2 ICs and 1 switch. It belongs with the radio and wireless and lEDs and displays boards and the ESP32 boards of this library.
The PCB makes the wirering easier and allows for easy attatchment of additional sensors. The PCB was created using KiCAD 7.0 and this path includes all files to order and modify the files at hand.
The PCB already has lanes to multiple GPIO pins of the ESP, allowing easy modification and expansion with more sensor. Some inputs use the additional unused channels of the Level shifter.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | , , , , , | ||
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
| 1 | 3V3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J10 |
| 1 | 5VCC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J11 |
| 1 | GND | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J9 |
| 1 | Neopixel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J1 |
| 1 | OLED | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J0 |
| 1 | Reserve IO09 3V3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J7 |
| 1 | Reserve IO12 3V3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J8 |
| 1 | Reserve IO23 5VCC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J5 |
| 1 | Reserve IO25 5VCC | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J6 |
| 1 | Reset | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | Temperature Sensor | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Horizontal | J2 |
| 1 | esp32-wemos-d1-mini | ESP32Mini:esp32-wemos-d1-mini | U1 |
| 1 | ~ | Level Shifter:4xLEvel Shifter | U2 |
The 24 most common of 30 parts.

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


It measures 106.7 × 78.7 mm and has 2 copper layers, 1.6 mm thick.
30 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ArwedMeinert/Spinning-Light repository on GitHub, at the commit this page was made from: the board is PCB/SpinningLight/SpinningLight.kicad_pcb and its schematic PCB/SpinningLight/SpinningLight.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).