Skip to the content
2 layers22.9 × 30.5 mmHallCoinDetector, the printed circuit board in 3D

Detector de polaridad de campo magnético para Mago :)

Size
22.9 × 30.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
20
Pads
89
Tracks, vias
159, 19
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
24 Jun 2023
Updated
26 Jul 2023

Overview

HallCoinDetector is an open-source printed circuit board by ArielRobotti, from the ArielRobotti/MagneticFieldDetector repository on GitHub. It is a 2-layer board of 22.9 × 30.5 mm with 31 parts on 20 nets, routed with 159 tracks and 19 vias.

It is built around the TPS61070DDC, LM393 and SE555D, with the BSS214NW-TP and SS14HE among its other parts. Its parts include 14 resistors, 5 capacitors, 4 ICs, 3 diodes and 1 transistor.

Main components

5

README

README.md

Magnetic Field Polarity Detector

This device is designed for use in the field of magical arts.

Description

The Magnetic Field Polarity Detector is a compact device designed to detect the presence of a magnetic field and indicate its polarity through vibrations. When the device is exposed to a north-to-south magnetic field, it will vibrate intermittently, while a south-to-north magnetic field will cause continuous vibrations.

Schematic Design and Simulation in Multisim 14

The chosen design is based on the implementation of a linear Hall sensor, AH49E, which provides an output voltage proportional to the intensity of the magnetic field. The sensor outputs a voltage within specific thresholds depending on the magnetic field intensity. This voltage is then processed by comparators to activate the vibration motor accordingly.

Design Adaptations

To accommodate the power supply requirements of the circuit components, an additional boost converter stage was included. This stage provides a stable 5V output from the 3V battery. The motor is directly powered from the 3V line to prevent feedback into the 5V line.

Usage

  1. Ensure that the device is turned off before use.
  2. Insert a 3V battery into the battery holder.
  3. Turn on the device using the power switch.
  4. Hold the Magnetic Field Polarity Detector near the target area.
  5. Observe the vibration patterns:
  • Intermittent vibrations indicate the presence of a magnetic field in the south-to-north direction.
  • Continuous vibrations indicate the presence of a magnetic field in the north-to-south direction.
  1. Move the detector away from the proximity of the magnetic object to stop the vibrations.
  2. Turn off the device when not in use to conserve battery life.

Specifications

  • Dimensions: 25mm x 30mm
  • Power Supply: 3V battery (included)
  • Power Switch: On/Off control

Parts

31
QtyValueFootprintReferences
410kResistor_SMD:R_0805_2012MetricR7, R8, R11, R12
44u7Capacitor_SMD:C_0805_2012MetricC1, C2, C3, C5
3100kResistor_SMD:R_0805_2012MetricR2, R4, R5
2120kResistor_SMD:R_0805_2012MetricR3, R6
21N4148Diode_SMD:D_SOD-123D1, D2
2910kResistor_SMD:R_0805_2012MetricR1, R13
110Resistor_SMD:R_0805_2012MetricR14
1100nCapacitor_SMD:C_0603_1608MetricC4
11kResistor_SMD:R_0805_2012MetricR9
122kResistor_SMD:R_0805_2012MetricR10
13VoltsBatery Holder:cr1616BT1
14.7uHInductor_SMD:L_Wuerth_WE-TPC-3816L1
149E HallPackage_TO_SOT_SMD:SOT-23-3U3
1BSS214NWPackage_TO_SOT_SMD:SOT-323_SC-70Q2
1LM393Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU4
1Motor_DC 3VConnector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_VerticalM1
1OnButton_Switch_SMD:SW_SPDT_PCM12SW1
1SE555DPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1SS14HEDiode_SMD:D_PowerDI-123D3
1TPS61070Package_TO_SOT_SMD:SOT-23-6U2

More from ArielRobotti/MagneticFieldDetector

1
  • 2 layers100 × 100 mmHallCoinDetectorPanelizado, the printed circuit board in 3D

    HallCoinDetectorPanelizado

    ArielRobotti/MagneticFieldDetector

    Detector de polaridad de campo magnético para Mago :)

    464 parts1

Similar boards

  • 2 layersGhostly light, the printed circuit board in 3D

    Ghostly light

    akornsys-rdi/ghostly-light

    Ghostly Light - Pacman's ghost toy light

    20 partsGPL-3.0
  • 4 layers100 × 120 mmPanoptes, the printed circuit board in 3D

    Panoptes

    jjCSE113NMT/dsp-neutron-spectrometer

    A place to keep all our material related to our senior design project.

    111 parts3
  • 4 layers80 × 100 mmNuBiHo atmega328P, the printed circuit board in 3D

    NuBiHo atmega328P

    clover-clever/NuBiHo_Quad_Drone

    Microprocessor Quad Drone System, based on SPRacing R3 w/Arduino PPM Control Signal

    81 parts
  • 2 layers84 × 62 mmDischarge, the printed circuit board in 3D

    Discharge

    ncku-formula-racing/circuit

    A monorepo of circuit boards

    27 parts1
  • 2 layers39.2 × 36.6 mmLink101, the printed circuit board in 3D

    Link101

    robocore-labs/link101-hardware

    link101 is a multi-protocol USB interface board. One Type-C cable gives you CAN-FD, RS485, Dynamixel, Feetech, UART, I2C, and MIT Cheetah-protocol ports, all as stable Linux devices.

    71 parts1CERN-OHL-S-2.0
  • 2 layers150 × 60 mmGPSDOMonitor, the printed circuit board in 3D

    GPSDOMonitor

    sergeyvfx/GPSDOMonitor

    A tiny module which is connecting to a databus of GPSDO modules with the goal to visualize when the PLL is locked, GPS time is stabilized and things like this.

    49 parts1MIT
  • 2 layers54.9 × 58.4 mmIR Digipot, the printed circuit board in 3D

    IR Digipot

    sergeyvfx/IR-Volume-Control

    Digipot volume control using IR controller

    134 partsMIT
  • 2 layers26.5 × 60.5 mmMBus to radio, the printed circuit board in 3D

    MBus to radio

    Tobias0110/EVN_Kaifa_ESP_MQTT

    Allows you to read the MBus data of a Kaifa smartmeter used by the EVN in Austria, decrypt the packages and send the values over MQTT.

    27 parts2GPL-2.0

Questions

How big is the HallCoinDetector PCB?

It measures 22.9 × 30.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the HallCoinDetector use?

31 parts, built around the TPS61070DDC, LM393, SE555D and BSS214NW-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the HallCoinDetector KiCad files?

From the ArielRobotti/MagneticFieldDetector repository on GitHub, at the commit this page was made from: the board is src_files/HallCoinDetector/HallCoinDetector.kicad_pcb and its schematic src_files/HallCoinDetector/HallCoinDetector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the HallCoinDetector design in my own project?

Its repository states no licence, so its author keeps all rights: ask ArielRobotti before reusing the design.