
OutputFilter
Arbeshab/Class-S-Power-Amplifier-Simulations
Supplement material for the publication "Comprehensive Study of Class S Power Amplification Technology for High-Frequency Communications Systems"

Supplement material for the publication "Comprehensive Study of Class S Power Amplification Technology for High-Frequency Communications Systems"
Endstufe v2 is an open-source printed circuit board by Arbeshab, from the Arbeshab/Class-S-Power-Amplifier-Simulations repository on GitHub. It is a 2-layer board of 77.2 × 77 mm with 73 parts on 35 nets, routed with 147 tracks and 566 vias.
It is built around the MPP4202-206, PD55003-E and RFM01U7P(TE12L,F). Its parts include 24 capacitors, 20 resistors, 6 connectors, 6 inductors and 4 transistors.
Supplement material for the publication "Comprehensive Study of Class S Power Amplification Technology for High-Frequency Communications Systems"
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1e-9 | WCAP-CSGP:WCAP-CSGP_0805_H0.8_R | C9, C10, C15, C16, C21, C22 |
| 4 | 742792036 | WE-CBF:WE-CBF_0805(W=3.0) | L1, L2, L3, L4 |
| 2 | 1 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R19, R20 |
| 2 | 1.5e-9 | WCAP-CSGP:WCAP-CSGP_0805_H0.8_R | C23, C24 |
| 2 | 10 | SamacSys_Parts:RESC1632X70N | R13, R14 |
| 2 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8 |
| 2 | 10e-6 | coilcraftFootprintLib:1210POC | L5, L6 |
| 2 | 2.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R12 |
| 2 | 22uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C1, C2 |
| 2 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R11 |
| 2 | 30 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R18 |
| 2 | 47e-6 | WCAP-CSGP:WCAP-CSGP_1210_H2.5 | C17, C18 |
| 2 | 47nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | 47pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 2 | 5 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
| 2 | 50 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | 68e-9 | WCAP-CSGP:WCAP-CSGP_0805_H0.8_R | C19, C20 |
| 2 | 865080657017_150uF | WCAP-ASLI:WCAP-ASLI_10X10.5(DXL) | C13, C14 |
| 2 | 885012207095_33nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12 |
| 2 | 910 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R17 |
| 2 | Conn_Coaxial | SMAconnector:1.6mmSMD_SMA_sideways | J1, J2 |
| 2 | MPP4202 | MPP4202:mpp4202 | D1, D2 |
| 2 | PD55003-E | snapEDAfootprints:TRANS_PD55008-E | Q3, Q4 |
| 2 | RFM01U7P_TE12L | SamacSys_Parts:RFM01U7PTE12LF | Q1, Q2 |
| 2 | THS4302RGTR | SamacSys_Parts:QFN50P300X300X100-17N-D | IC1, IC2 |
| 1 | outn_SMA | SMAconnector:1.6mmSMD_SMA_sideways | J6 |
| 1 | outp_SMA | SMAconnector:1.6mmSMD_SMA_sideways | J5 |
| 1 | powerConn5Lower | WR-MPC3:662105130822 | J3 |
| 1 | powerConn5Upper | WR-MPC3:662105130822 | J4 |
The 64 most common of 73 parts.

Arbeshab/Class-S-Power-Amplifier-Simulations
Supplement material for the publication "Comprehensive Study of Class S Power Amplification Technology for High-Frequency Communications Systems"



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32


It measures 77.2 × 77 mm and has 2 copper layers, 1.6 mm thick.
73 parts, built around the MPP4202-206, PD55003-E and RFM01U7P(TE12L,F). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Arbeshab/Class-S-Power-Amplifier-Simulations repository on GitHub, at the commit this page was made from: the board is PCB/Endstufe_v1.1/Endstufe_v2/Endstufe_v2.kicad_pcb and its schematic PCB/Endstufe_v1.1/Endstufe_v2/Endstufe_v2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Arbeshab before reusing the design.