2 layers240 × 38.7 mm
ETAclock
drkmsmithjr/ETANixieClock
An Estimated Time of Arrival Nixie Tube Clock Open Source Hardware Project
126 parts6
2 layers185 × 73 mm
Nixie Clock
AngryRabbitChicken/Nixie-ClockMy Nixie clock based on the IN-14 Tubes with an ESP8266 as interface and time-reciever, with an optional DCF77 Antenna.
- Size
- 185 × 73 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 110
- Pads
- 301
- Tracks, vias
- 738, 130
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Aug 2024
- Updated
- 28 Aug 2024
Overview
Nixie Clock is an open-source printed circuit board by AngryRabbitChicken, from the AngryRabbitChicken/Nixie-Clock repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 185 × 73 mm with 33 parts on 110 nets, routed with 738 tracks and 130 vias.
It is built around the WEMOS D1 MINI, TPIC6B595N and 74HCT04D. Its parts include 11 ICs, 8 resistors, 2 capacitors and 2 connectors. It belongs with the lEDs and displays boards and the ESP8266 boards of this library.
Main components
3
WEMOS D1 MINI
A mini wifi board with 4MB flash based on ESP-8266EX, hardware version 4.0.0.LolinUncategorised
TPIC6B595N
PDIP-20-40℃~+125℃ 1 4.5V~5.5V 8 Asynchronous clear function、Output enable Open-drain Serial-to-Serial or Parallel TPIC PDIP-20 Shift Registers ROHSTexas InstrumentsShift Registers
74HCT04D
SO-14-40℃~+125℃ 1 19ns@4.5V,50pF 2V 2uA 3.7V 4.5V~5.5V 400mV 4mA 4mA 6 74HCT 800mV SO-14 Inverters ROHSNexperiaInverters
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | TPIC6B595 | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U2, U4, U6, U7, U8, U9, U10, U11 |
| 6 | 21.5k | Resistor_SMD:R_1206_3216Metric | R1, R3, R5, R6, R7, R8 |
| 6 | IN-14 | Julians_parts:nixies-us-IN-14_1.1mm_holes | N1, N2, N3, N4, N5, N6 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H1, H2, H3, H4 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R4 |
| 1 | 10µ | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 1µ | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 74HCT04 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1 |
| 1 | Pollin_DCF1 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | U3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Altech:Altech_AK100_1x02_P5.00mm | J1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Altech:Altech_AK100_1x03_P5.00mm | J2 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U5 |
Similar boards
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
- 2 layers100 × 100 mm
Column driver
CarlRaymond/AnnaxFlipdotDriver
KiCad project for drivers for Annax flip-dot display panels
104 parts44 - 2 layers100 × 80 mm
- 2 layers99.1 × 99.1 mm
- 2 layers75.3 × 33.8 mm
24-ch relay driver kicad
dilshan/24ch-usb-high-voltage-driver
24-Channel USB high voltage driver.
35 parts5MIT - 2 layers99.1 × 99.1 mm
At90s2323
atoomnetmarc/AVR-demo-board
AVR demo boards for old AT90S* microcontrollers.
171 parts4Apache-2.0
Questions
How big is the Nixie Clock PCB?
It measures 185 × 73 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Nixie Clock use?
33 parts, built around the WEMOS D1 MINI, TPIC6B595N and 74HCT04D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nixie Clock KiCad files?
From the AngryRabbitChicken/Nixie-Clock repository on GitHub, at the commit this page was made from: the board is Nixie_clock.kicad_pcb and its schematic Nixie_clock.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nixie Clock design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).