Andy-Cheng1017/Solar-board太陽能板12V轉5V
Solar Charger is an open-source printed circuit board by Andy-Cheng1017, from the Andy-Cheng1017/Solar-board repository on GitHub, published under the MIT licence. It is a 2-layer board of 112.3 × 50.3 mm with 53 parts on 37 nets, routed with 154 tracks and 44 vias.
It is built around the BW6101, CN3795 and IP6510, with the B340A and AP4435 among its other parts. Its parts include 22 capacitors, 14 resistors, 6 ICs, 4 connectors and 3 diodes. It belongs with the power boards of this library.
太陽能板12V轉5V
含測試程式
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1u | Capacitor_SMD:C_0805_2012Metric | C7, C13, C14, C15, C16, C18 |
| 4 | 100 | Resistor_SMD:R_0805_2012Metric | R9, R10, R11, R12 |
| 4 | 40F | 1Resouce:Super Capacitor | C9, C10, C11, C12 |
| 4 | BW6101_ | Package_TO_SOT_SMD:SOT-23-5 | U2, U3, U4, U5 |
| 3 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C4, C6, C20 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric | C1, C2, C8 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric | R1, R7 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | B340A | Diode_SMD:D_SMA | D2, D3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J2, J3 |
| 1 | 0.22u | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric | C22 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 13K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 15K | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric | C19 |
| 1 | 2 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | 220u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C21 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 3.3k | Resistor_SMD:R_0805_2012Metric | R14 |
| 1 | 33u | Inductor_SMD:L_10.4x10.4_H4.8 | L1 |
| 1 | 60m | Resistor_SMD:R_2512_6332Metric | R3 |
| 1 | AP4435 | Package_SO:PowerIntegrations_SO-8 | AP1 |
| 1 | CN3795 | Package_SO:SSOP-10_3.9x4.9mm_P1.00mm | U1 |
| 1 | IP6510 | 1Resouce:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias | U6 |
| 1 | L | Inductor_SMD:L_10.4x10.4_H4.8 | L2 |
| 1 | LED_Red | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock:TerminalBlock_bornier-3_P5.08mm | J1 |
| 1 | Solar_Cell | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | S1 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | P1 |
paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA
Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…
duanestorey/hifi-amp
A high-fidelity four-channel amplifier with active-crossovers and room correction
drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
Alia5/PiCCANTE
PiCCANTE is a powerful tool for exploring and reversing CAN busses of vehicles, based on Raspberry Pi Pico (any model)
Smoothieware/Smoothieboard2
Hardware files for the Smoothieboard v2, and extension boards
CuriousMotor/Onyx-Stepper-Motherboard
The successor of the iconic Arduino-CNC-shield
JohnDecebal/UNDR
UNDR AUTO is a fully automatic WDT (Weiss Distribution Technique) tool designed for espresso enthusiasts. This open-source DIY project combines 3D printed parts with electronic and mechanical components to create a…
It measures 112.3 × 50.3 mm and has 2 copper layers, 1.6 mm thick.
53 parts, built around the BW6101, CN3795, IP6510 and B340A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Andy-Cheng1017/Solar-board repository on GitHub, at the commit this page was made from: the board is Circuit/V1/Solar charger/Solar Charger.kicad_pcb and its schematic Circuit/V1/Solar charger/CN3795 MPPT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).