4 layers77.8 × 63.2 mm
Flatmcu
GyrocopterLLC/flatmcu
Hardware design for the flatmcu - an STM32G4 based BLDC / FOC motor controller.
127 parts40MIT
2 layers38.5 × 59.8 mm
Switch emergent
AndreyUdeneew/_Shield_Emergent__2- Size
- 38.5 × 59.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 42
- Pads
- 142
- Tracks, vias
- 282, 150
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 8 May 2024
- Updated
- 6 Jun 2024
Overview
Switch emergent is an open-source printed circuit board by AndreyUdeneew, from the AndreyUdeneew/_Shield_Emergent__2 repository on GitHub. It is a 2-layer board of 38.5 × 59.8 mm with 33 parts on 42 nets, routed with 282 tracks and 150 vias.
It is built around the PMEG2020EH. Its parts include 9 resistors, 8 diodes, 5 connectors, 4 capacitors and 3 ICs.
Main components
1README
README.md_Shield_Emergent__2
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 240 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R8, R10, R11 |
| 5 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2, D4, D5, D6 |
| 2 | 0.1 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 120 uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C3, C4 |
| 2 | Conn_01x10 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J4, J5 |
| 2 | D_TVS | Diode_SMD:D_SOD-123F | D7, D8 |
| 2 | R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | ~ | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | U1, U2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x09 | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J1 |
| 1 | PMEG2020EH | Diode_SMD:D_SOD-123F | D9 |
| 1 | ~ | Vedro:RP2040Zero | U3 |
The 29 most common of 33 parts.
Similar boards
- 2 layers42 × 24 mm
- 4 layers65.1 × 77.5 mm
OPEN PHASE
foukouda/OPEN_PHASE
OPEN_PHASE: 3-phase inline current and voltage sensing PCB for BLDC drone motors (OPEN THRUST LAB). 1 mΩ shunts + INA241A2 (enhanced PWM rejection), AD7606C-18 18-bit 1 MSPS simultaneous-sampling ADC, LT8362 + LT3045-1…
125 parts1CERN-OHL-P-2.0 - 2 layers98 × 98 mm
- 4 layers66 × 47 mm
- 4 layers134.6 × 127 mm
- 4 layers61.8 × 79.8 mm
Owl mainboard
danieltyukov/owltunes
Owl-shaped Spotify remote for your desk and pocket: ESP32-S3 firmware, LVGL UI, KiCad PCB, 3D-printed enclosure, and owl v0 on the Waveshare AMOLED kit
107 partsMIT - 4 layers
Osn simple light solar
hkdnl/osn-simple-light-solar
simple solar light pcba on 2xAA nimh battery
52 parts
Questions
How big is the Switch emergent PCB?
It measures 38.5 × 59.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Switch emergent use?
33 parts, built around the PMEG2020EH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Switch emergent KiCad files?
From the AndreyUdeneew/_Shield_Emergent__2 repository on GitHub, at the commit this page was made from: the board is switch emergent/switch emergent.kicad_pcb and its schematic switch emergent/switch emergent.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Switch emergent design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndreyUdeneew before reusing the design.