

Micromouse V01
Micromouse alagorithm
- Size
- 70.7 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 61
- Pads
- 256
- Tracks, vias
- 867, 74
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Jan 2022
- Updated
- 26 Sep 2026
Overview
Micromouse V01 is an open-source printed circuit board by AndrewJNg, from the AndrewJNg/Micromouse repository on GitHub. It is a 2-layer board of 70.7 × 100 mm with 73 parts on 61 nets, routed with 867 tracks and 74 vias.
It is built around the ESP32-WROOM-32, AMS1117-3.3 and MPU-6050, with the QRE1113 among its other parts. Its parts include 30 resistors, 14 switches, 8 diodes, 8 connectors and 6 transistors. It belongs with the ESP32 boards of this library.
Main components
4ESP32-WROOM-32
SMD,18x25.5mm-40℃~+85℃ -98dBm 2.4GHz 2.7V~3.6V 20dBm Bluetooth4.2 ESP32-DOWDQ6 UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMPU-6050
QFN-24-EP(4x4)-40℃~+85℃ 16bit 1KB 2.375V~3.46V 5uA Accelerometer Gyroscope I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(4x4) Accelerometers ROHSTDK InvenSenseAccelerometersQRE1113
DIP-41mm 20mA DIP-4 Reflective Optical Interrupters ROHSonsemiReflective Optical Interrupters
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3, R5, R7, R9, R11, R15, R16, R17, R19, R26, R27, R28, R29, R30 |
| 9 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R4, R6, R8, R10, R12, R13, R14, R18 |
| 8 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R20, R21, R22, R23, R24, R25 |
| 6 | 3mm_IR | parts:3mm_IR | S1, S2, S3, S4, S5, S6 |
| 6 | Q_NPN_BEC | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 5 | QRE1113 | OptoDevice:OnSemi_CASE100CY | S7, S8, S9, S10, S11 |
| 3 | Conn_01x02_Female | Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_Vertical | J2, J4, J8 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J1, J7 |
| 2 | Start | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW2, SW3 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | AS5600 Left | Connector_PinSocket_2.00mm:PinSocket_1x04_P2.00mm_Vertical | J5 |
| 1 | AS5600 Right | Connector_PinSocket_2.00mm:PinSocket_1x04_P2.00mm_Vertical | J6 |
| 1 | Buzzer | parts:4.2mm_5.5mm buzzer | BZ1 |
| 1 | ESP32-WROOM | parts:MODULE_ESP32_DEVKIT_V1 | U11 |
| 1 | MPU-6050 | parts:MPU6050 module | U13 |
| 1 | OLED | parts:OLED 128x32 | J3 |
| 1 | SW_DPDT_x2 | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | TB6612FNG | parts:TB6612FNG | U12 |
More from AndrewJNg/Micromouse
1- 2 layers70.7 × 88.5 mm

Similar boards
- 4 layers66.8 × 59.2 mm

Miners Safety Helmet
edgeggrr/Miners-Safety-Helmet
An IoT-based wearable safety helmet designed to enhance underground miner safety through multi-sensor hazard detection, real-time audio-visual alerts, and cloud telemetry via ThingSpeak.
33 parts3MIT - 4 layers100 × 80 mm

Hackathon board v2
Brian-Nziza/ESP32-Hackathon-Board
KiCad 10 project. Board is 100 × 80 mm, four layers, fabricated by JLCPCB.
75 parts - 2 layers116 × 116 mm

- 2 layers77.8 × 56 mm

GRP Onboarding
joshua691/Gaucho-Rocket-Project_Onboarding_IMU_PCB
This project was developed as part of the onboarding process for Gaucho Rocket Project (GRP). The goal was to design a custom PCB for a rocket motion sensing system capable of collecting inertial measurement data, such…
42 parts - 2 layers65 × 38.2 mm

Gps tracer
OlegDemk/ESP32_GPS_loger_v1
GPS logger can log in GPS data every 5 seconds into Micro SD card.
88 parts - 2 layers40 × 60 mm

- 4 layers82 × 100 mm

Falcon Edge
rmingon/Falcon-Edge
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.
48 parts11 - 4 layers101.6 × 26.9 mm

Questions
How big is the Micromouse V01 PCB?
It measures 70.7 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Micromouse V01 use?
73 parts, built around the ESP32-WROOM-32, AMS1117-3.3, MPU-6050 and QRE1113. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Micromouse V01 KiCad files?
From the AndrewJNg/Micromouse repository on GitHub, at the commit this page was made from: the board is 2_MambaMouse_V01/2_PCB_KiCad/KiCad/Micromouse_V01.kicad_pcb and its schematic 2_MambaMouse_V01/2_PCB_KiCad/KiCad/Esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Micromouse V01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask AndrewJNg before reusing the design.