Skip to the content
2 layers77.5 × 20.3 mmTelescopeHeater, the printed circuit board in 3D

PWM circuit to control heating elements for telescopes

Size
77.5 × 20.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
16
Pads
61
Tracks, vias
144, 7
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
18 Jan 2018
Updated
9 Feb 2019

Overview

TelescopeHeater is an open-source printed circuit board by AndreasFMueller, from the AndreasFMueller/TelescopeHeater repository on GitHub. It is a 2-layer board of 77.5 × 20.3 mm with 19 parts on 16 nets, routed with 144 tracks and 7 vias.

It is built around the HLMP-1601 and IRLML0030. Its parts include 4 resistors, 4 connectors, 3 capacitors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README

PWM circuit to control heating elements for telescopes

Parts

19
QtyValueFootprintReferences
2100kheater:CermetRV1, RV2
210kResistors_SMD:R_0603_HandSolderingR3, R4
21kResistors_SMD:R_0603_HandSolderingR1, R2
2HLMP-1601LEDs:LED_D3.0mmD1, D2
2Heaterheater:RC-5231P3, P4
2IRLML0030heater:SOT-23-IRLMQ1, Q2
10.1uCapacitors_SMD:C_0603_HandSolderingC3
110uCapacitors_Tantalum_SMD:CP_Tantalum_Case-C_EIA-6032-28_HandC1
14.7uCapacitors_SMD:C_0805_HandSolderingC2
1ATTINY25-SHousings_SOIC:SSO-8_6.8x5.9mm_Pitch1.27mm_Clearance7mmIC1
1ISPheater:ISPP2
1LP2985LVTO_SOT_Packages_SMD:SOT-23-5_HandSolderingU1
1Powerheater:PowerP1

Similar boards

  • 6 layers80 × 80 mmEps, the printed circuit board in 3D

    Eps

    OSUSat/cubesat

    Open Source Earth Imaging Satellite Hardware + Firmware

    413 parts8MIT
  • 4 layers358 × 40 mmLongboi, the printed circuit board in 3D

    Longboi

    KungfuPancake/longboi

    Possibly the longest controller board to control the BoxTurtle AFC

    297 parts7Apache-2.0
  • 2 layers22.1 × 18 mmHelena base sd, the printed circuit board in 3D

    Helena base sd

    Reisi/Helena

    Helena is an alternative driver for the Yinding or KD2 Headlight Cycling Lamp.

    59 parts5BSD-2-Clause
  • 4 layers100 × 100 mmPS BPSLeader, the printed circuit board in 3D

    PS BPSLeader

    lhr-solar/PS-BPSLeader

    Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

    388 parts3MIT
  • 2 layers59.1 × 75.7 mmPS MotorControllerInterfacePCB, the printed circuit board in 3D

    PS MotorControllerInterfacePCB

    lhr-solar/PS-MotorControllerInterfacePCB

    Provides power conversion/protection and fan control for the Prohelion WaveSculptor 22 motor controller

    127 parts3
  • 2 layers86.6 × 71.8 mmVehicleControlUnit, the printed circuit board in 3D

    VehicleControlUnit

    lhr-solar/VCAT-VehicleControlUnit

    Vehicle Control Unit (VCU) for the 2026 Longhorn Racing Solar car

    142 parts2MIT
  • 2 layers45 × 72 mmRelay, the printed circuit board in 3D

    Relay

    adarwoo/modbus_relay

    A modbus RTU relay board with 3 relays for the CNC. This uses the ASX framework

    43 parts1
  • 2 layersPcb actionneur ventouse, the printed circuit board in 3D

    Pcb actionneur ventouse

    Brasseur2robot/Les-brasseurs-d-idees

    Codebase de l'équipe légende des brasseurs d'idées concourant à la coupe de France de robotique. Vous pouvez y retrouver les différents fichiers utilisés pour la création et le fonctionnement de notre robot principal et…

    25 parts1GPL-3.0

Questions

How big is the TelescopeHeater PCB?

It measures 77.5 × 20.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the TelescopeHeater use?

19 parts, built around the HLMP-1601 and IRLML0030. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the TelescopeHeater KiCad files?

From the AndreasFMueller/TelescopeHeater repository on GitHub, at the commit this page was made from: the board is hardware/telescopeheater.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the TelescopeHeater design in my own project?

Its repository states no licence, so its author keeps all rights: ask AndreasFMueller before reusing the design.