
Anavi fume extractor
AnaviTechnology/anavi-fume-extractor
Open source WiFi development board for a portable fume extractor with 5V USB-powered fan for absorbing smoke.

ANAVI Tag Manager is an open source hardware development board that acts like a WiFi smart gas detector. It features:
Anavi tag manager is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-tag-manager repository on GitHub. It is a 2-layer board of 59.9 × 40.6 mm with 27 parts on 15 nets, routed with 200 tracks and 12 vias.
It is built around the ESP-12E and LD1117S33TR(MS). Its parts include 5 resistors, 3 ICs, 2 capacitors, 1 diode and 1 connector. It belongs with the ESP8266 boards of this library.
ANAVI Tag Manager is an open source hardware development board that acts like a WiFi smart gas detector. It features:
Open source software for ANAVI Tag Manager written as an Arduino sketch is also available at GitHub](https://github.com/AnaviTechnology/anavi-tag-manager-sw).
The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).
Note: This is a human-readable summary of (and not a substitute for) the license.
You are free to:
Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:
You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.
Credit can be attributed through a link to the creator website: http://www.anavi.technology
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | I2C_SENS_1 | Pin_Headers:Pin_Header_Straight_1x04 | U1, U2, U3 |
| 2 | , | ||
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 2K | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 4,7K | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | DISPLAY, GPIO |
| 1 | 68R | Resistors_SMD:R_0603_HandSoldering | R1 |
| 1 | CONN_01X03 | Pin_Headers:Pin_Header_Straight_1x03 | P1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02 | PWR IN |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | SPI |
| 1 | ESP-12E | ESP-12E_SMD | ESP-12 |
| 1 | LD1117S33TR | Package_TO_SOT_SMD:SOT-223 | V1 |
| 1 | LED | LEDs:LED_1206 | D1 |
| 1 | LOGO | logo:anavi-logo | G*** |
| 1 | SW_DIP_x01 | Buttons_Switches_ThroughHole:SW_PUSH_6mm_h4.3mm | RESET |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | PWR IN |
The 23 most common of 27 parts.

AnaviTechnology/anavi-fume-extractor
Open source WiFi development board for a portable fume extractor with 5V USB-powered fan for absorbing smoke.

AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules

AnaviTechnology/anavi-gas-detector
WiFi development board for MQ gas sensors

magkopian/esp-arduino-temp-monitor
ESP8266 based temperature and humidity monitor.




It measures 59.9 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the ESP-12E and LD1117S33TR(MS). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AnaviTechnology/anavi-tag-manager repository on GitHub, at the commit this page was made from: the board is anavi-tag-manager.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.