Skip to the content
2 layers11.2 × 11.6 mmAnavi ens212-sensor, the printed circuit board in 3D

ANAVI temperature and humidity I2C sensor built around ENS212.

Size
11.2 × 11.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
4
Pads
17
Tracks, vias
32, 3
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
15 Oct 2026
Updated
19 Oct 2026

Overview

Anavi ens212-sensor is an open-source printed circuit board by AnaviTechnology, from the AnaviTechnology/anavi-ens212-sensor repository on GitHub. It is a 2-layer board of 11.2 × 11.6 mm with 7 parts on 4 nets, routed with 32 tracks and 3 vias.

It is built around the ENS210. Its parts include 2 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.

Main components

1

README

README.md

ANAVI ENS212 Sensor

An open-source hardware temperature and humidity sensor module based on the ScioSense ENS212, featuring an I2C interface.

ANAVI ENS212 Sensor has been designed with the cross platform and open source electronics design automation suite KiCad.

License

The project is released under the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0).

Note: This is a human-readable summary of (and not a substitute for) the license.

You are free to:

Share — copy and redistribute the material in any medium or format Adapt — remix, transform, and build upon the material for any purpose, even commercially. The licensor cannot revoke these freedoms as long as you follow the license terms. Under the following terms:

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use. ShareAlike — If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits. Notices:

You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.

You will have to provide a link to the original creator of the project http://www.anavi.technology on any documentation or website.

Credit can be attributed through a link to the creator website: http://www.anavi.technology

Parts

7
QtyValueFootprintReferences
21kΩResistor_SMD:R_0603_1608MetricR1, R2
1100nFCapacitor_SMD:C_0603_1608MetricC1
1Conn_01x04_PinConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1ENS210Package_DFN_QFN:AMS_QFN-4-1EP_2x2mm_P0.95mm_EP0.7x1.6mmU1
1LOGOlogo:anavi-logoG***
1MountingHole_2.2mm_M2MountingHole:MountingHole_2.2mm_M2M

Similar boards

  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 4 layers25.4 × 62.7 mmESP32 Board, the printed circuit board in 3D

    ESP32 Board

    Fred98246/ESP-32-Dev-Board

    Custom ESP32-S3-MINI-1 development board

    27 parts2MIT
  • 2 layers43 × 43 mmIec62386-panel, the printed circuit board in 3D

    Iec62386-panel

    peterisza/iec62386-wall-panel

    Wall panel for smart homes. 2 wires, no polarity, arbitrary bus topology, exchangeable front panel with hardware capacitive buttons, temperature+humidity+pressure+CO2.

    64 parts2
  • 2 layers46.3 × 43.4 mmCarbon, the printed circuit board in 3D

    Carbon

    Enderman8843/Carbon

    Carbon is an open-source indoor air quality sensing board designed for accurate VOC, temperature, and humidity monitoring.

    38 parts1
  • 4 layers26.4 × 56.8 mmESP32 Dev module, the printed circuit board in 3D

    ESP32 Dev module

    andresmoreno2702-gif/ESP32-S3-Dev-Board-Project

    All KICAD Files and Schematics

    26 partsMIT
  • 2 layersEsp32 pcb, the printed circuit board in 3D

    Esp32 pcb

    bobbobdude/AF1_Runiom_Project

    I'm thinking that this repo can be a collection of everything we are up to with code, PCB design, 3D models and also general planning.

    26 parts
  • 4 layers86.4 × 68.6 mmCapstone, the printed circuit board in 3D

    Capstone

    camerondm9/ece4600capstone

    Code for our capstone project

    238 parts

Questions

How big is the Anavi ens212-sensor PCB?

It measures 11.2 × 11.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Anavi ens212-sensor use?

7 parts, built around the ENS210. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Anavi ens212-sensor KiCad files?

From the AnaviTechnology/anavi-ens212-sensor repository on GitHub, at the commit this page was made from: the board is anavi-ens212-sensor.kicad_pcb and its schematic anavi-ens212-sensor.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Anavi ens212-sensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnaviTechnology before reusing the design.