Skip to the content
2 layers49.8 × 71.9 mmBig bye, the printed circuit board in 3D

A project that encompasses (almost) all the knowledge and skills I acquired throughout my undergraduate degree, serving as a farewell gift!

Size
49.8 × 71.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
37
Pads
141
Tracks, vias
101, 1
Pours
2
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
28 May 2023
Updated
3 Aug 2023

Overview

Big bye is an open-source printed circuit board by AnantaSrikar, from the AnantaSrikar/big-bye repository on GitHub. It is a 2-layer board of 49.8 × 71.9 mm with 19 parts on 37 nets, routed with 101 tracks and 1 via.

It is built around the ESP32-WROOM-32 and AMS1117-3.3. Its parts include 7 capacitors, 4 connectors, 4 switches, 2 resistors and 2 ICs. It belongs with the ESP32 boards of this library.

Main components

2

README

pcb/README.md

PCB

Here are the KiCAD files for the PCB that I designed for this project.

You can find the BOM here.

The ST7735 Display can be found at this link.

Schematic

The Schematic should be here, but not sure why it isn't :(

The PCB looks something like this:

The PCB should be here, but not sure why it isn't :(

You can watch a demo of the project in action (with the PCB and the display) here!

Parts

19
QtyValueFootprintReferences
40.1uFCapacitor_SMD:C_0805_2012MetricC2, C3, C4, C6
310uFCapacitor_SMD:C_0805_2012MetricC1, C5, C7
110KResistor_SMD:R_0805_2012MetricR1
110kResistor_SMD:R_0805_2012MetricR2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1BOOT_SELConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1BTN_DOWNButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW4
1BTN_LEFTButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW1
1BTN_RIGHTButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW2
1BTN_UPButton_Switch_THT:SW_TH_Tactile_Omron_B3F-10xxSW3
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U2
1UARTConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1
1USB_C_PlugConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12P1
1lockedConnector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_VerticalJ3

Similar boards

  • 2 layers90 × 76.5 mmLCDZapperPro, the printed circuit board in 3D

    LCDZapperPro

    charcole/LCDZapper

    Device for making light gun games playable on LCD TVs

    126 parts163
  • 2 layers85 × 56 mmHB RF ETH, the printed circuit board in 3D

    HB RF ETH

    alexreinert/PCB

    Some of my PCBs

    96 parts104
  • 2 layers62.2 × 30.5 mmWLED ESP32 Controller, the printed circuit board in 3D

    WLED ESP32 Controller

    Hasenpups/WLED_ESP32_Controller

    This work is licensed under a [Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License][cc-by-nc-sa].

    24 parts44
  • 2 layers150 × 50 mmEsp32-led smps, the printed circuit board in 3D

    Esp32-led smps

    lucysrausch/esp32-led-smps

    230V main LED smps. 2x30W Constant Current.

    179 parts30
  • 2 layers40 × 68 mmMULTIGW, the printed circuit board in 3D

    MULTIGW

    nuclearcat/ESP32ETH

    Simple ESP32 with native ethernet using LAN8720 phy, Arduino compatible

    32 parts30LGPL-2.1
  • 2 layers259.5 × 60.7 mm1512hh control, the printed circuit board in 3D

    1512hh control

    larryqiann/AP1512HH-ESP32

    Coway AP1512HH Main Board replacement with ESP32

    71 parts29CERN-OHL-P-2.0
  • 2 layers139.7 × 88.9 mmCharge Controller, the printed circuit board in 3D

    Charge Controller

    jharvey/Charge_Controller

    MPPT hardware which uses FUGU firmware

    163 parts24

Questions

How big is the Big bye PCB?

It measures 49.8 × 71.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Big bye use?

19 parts, built around the ESP32-WROOM-32 and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Big bye KiCad files?

From the AnantaSrikar/big-bye repository on GitHub, at the commit this page was made from: the board is pcb/big_bye.kicad_pcb and its schematic pcb/big_bye.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Big bye design in my own project?

Its repository states no licence, so its author keeps all rights: ask AnantaSrikar before reusing the design.