
Esp32miniBT
asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)

Carte élec Lum is an open-source printed circuit board by Anais971, from the Anais971/Projet repository on GitHub. It is a 2-layer board of 59 × 48.8 mm with 5 parts on 39 nets, routed with 27 tracks and 4 vias.
It is built around the ESP32-WROOM-32. Its parts include 3 connectors, 1 capacitor and 1 IC. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Autocom2 | FootprintGamelGe2_v8.0:Autocom2 | J2, J3 |
| 1 | Autocom4 | FootprintGamelGe2_v8.0:Autocom4 | J1 |
| 1 | C | FootprintGamelGe2_v8.0:C_Rect_L7.0mm_W2.5mm_P5.00mm | C5 |
| 1 | ESP32-WROOM-32 | FootprintGamelGe2_v8.0:ESP32_Module_38_pins_28mm_Wide | U1 |

asterics/esp32_mouse_keyboard
ESP32 implementation for HID over GATT Keyboard and Mouse (Bluetooth Low Energy). Including serial API for external modules (similar to Adafruit EZKey HID)


Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.




likeablob/slow-movie-player-7c
Yet another "Slow Movie Player" implementation with 7-color E-Paper module and ESP32.

JSnowden33/Wii-Bluetooth-Replacement
This project is a full replacement for the Nintendo Wii's Bluetooth module. Emulation of the Bluetooth module is performed on the PIC32 based on rnconrad's emulator, while controller connectivity on the ESP32 is based…
It measures 59 × 48.8 mm and has 2 copper layers, 1.6 mm thick.
5 parts, built around the ESP32-WROOM-32. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Anais971/Projet repository on GitHub, at the commit this page was made from: the board is Revue Sprint 3/LumCo Carte élec/Carte élec Lum/Carte élec Lum.kicad_pcb and its schematic Revue Sprint 3/LumCo Carte élec/Carte élec Lum/Carte élec Lum.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Anais971 before reusing the design.