Skip to the content
2 layersClosed Loop DC Motor Speed Control Project, the printed circuit board in 3D

Closed Loop DC Motor Speed Control Project

Ammar-Bin-Amir/Closed_Loop_DC_Motor_Speed_Control

Controlling Speed of DC Motor using PID Controller

Copper layers
2
Thickness
1.6 mm
Parts
59
Nets
62
Pads
192
Tracks, vias
381, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
6 Mar 2023
Updated
6 Mar 2023

Overview

Closed Loop DC Motor Speed Control Project is an open-source printed circuit board by Ammar-Bin-Amir, from the Ammar-Bin-Amir/Closed_Loop_DC_Motor_Speed_Control repository on GitHub. It is a 2-layer board with 59 parts on 62 nets, routed with 381 tracks and 0 vias.

It is built around the BC337, BC547 and BC557. Its parts include 21 resistors, 14 capacitors, 9 ICs, 3 transistors and 3 connectors. It belongs with the robots and motor control boards of this library.

Main components

3

README

README.md

Closed Loop DC Motor Speed Control

A speed control system's goal is to keep the motor's speed constant under a variety of circumstances. The DC motor is a nonlinear device in practice and speed variations are caused by disturbances, changes in load demand, etc. In this projet, the PID controller algorithm, a common controller in industries, has been implemented which overcome the disturbances occurring in the system and establishes the motor speed to the desired value without any human assistance.

Parts

59
QtyValueFootprintReferences
1310kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R11, R12, R13, R14, R15, R16, R18, R20, R21
7LM741Package_DIP:DIP-8_W7.62mm_Socket_LongPadsU1, U2, U5, U6, U7, U8, U9
4100kΩPotentiometer_THT:Potentiometer_Alps_RK163_Single_HorizontalRV0, RV1, RV2, RV3
30.022μFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC7, C9, C10
347kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR6, R7, R9
3SW_DPDT_x2Button_Switch_THT:SW_E-Switch_EG1224_SPDT_AngledSW1, SW2, SW3
2100μFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC13, C14
21kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR5, R17
2470μFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC11, C12
2470μF,16VDCCapacitor_THT:CP_Radial_D8.0mm_P2.50mmC2, C3
10.01μFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC1
10.1μFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC5
10.1μFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC8
10.22μFCapacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mmC4
115kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR8
11N4001Diode_THT:D_DO-41_SOD81_P12.70mm_HorizontalD1
11N4149Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD2
1200ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR19
14.7kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR10
147μFCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC6
1BC337Package_TO_SOT_THT:TO-92_InlineQ3
1BC547Package_TO_SOT_THT:TO-92_InlineQ1
1BC557Package_TO_SOT_THT:TO-92_InlineQ2
1DC MotorConnector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ2
1IR SensorConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ3
1LM555xMPackage_DIP:DIP-8_W7.62mm_Socket_LongPadsU4
1LM7805_TO220Package_TO_SOT_THT:TO-220-3_VerticalU3
1Power SupplyConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ1

Similar boards

  • 2 layers160 × 100 mm12V 6V3 Delay, the printed circuit board in 3D

    12V 6V3 Delay

    FordPrfkt/KT88-Amp

    Tube Amplifier using KT88 Tubes based on BlackCat

    114 parts1
  • 2 layers56 × 65 mmSeaTalk1, the printed circuit board in 3D

    SeaTalk1

    dotnet/iot

    This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

    24 parts2.4kMIT
  • 2 layers148.8 × 132.2 mmUsbflashprog, the printed circuit board in 3D

    Usbflashprog

    robsonsmartins/usbflashprog

    A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

    125 parts36
  • 2 layers83.8 × 72.4 mmVoice board, the printed circuit board in 3D

    Voice board

    Windfisch/analog-synth

    A low-cost semimodular analog synthesizer

    131 parts31GPL-3.0
  • 2 layers13 × 0.5 mmKamstrup, the printed circuit board in 3D

    Kamstrup

    Hal9k-dk/kamstrup

    Kamstrup IR-øje

    11 parts19
  • 2 layers167.8 × 200.6 mmRandom Jazz Generator, the printed circuit board in 3D

    Random Jazz Generator

    telec16/modular-synth

    Little side project, don't expect much updates.

    132 parts16
  • 2 layers100 × 100 mmWhiteBoy, the printed circuit board in 3D

    WhiteBoy

    nodep/NovaBox

    Circuit and PCB design of simple Bluetooth stereo receiver and amplifier

    111 parts11GPL-3.0
  • 2 layers53 × 55.1 mmLedclock sensor, the printed circuit board in 3D

    Ledclock sensor

    luk6xff/led-clock

    LED clock with some fancy features

    35 parts9MIT

Questions

What parts does the Closed Loop DC Motor Speed Control Project use?

59 parts, built around the BC337, BC547 and BC557. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Closed Loop DC Motor Speed Control Project KiCad files?

From the Ammar-Bin-Amir/Closed_Loop_DC_Motor_Speed_Control repository on GitHub, at the commit this page was made from: the board is Closed_Loop_DC_Motor_Speed_Control_Project/Closed_Loop_DC_Motor_Speed_Control_Project.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Closed Loop DC Motor Speed Control Project design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ammar-Bin-Amir before reusing the design.