
RP Pico robot
Amir-imani/Autonomous-Mobile-Robot
Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.

Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.
Fan robot V3 is an open-source printed circuit board by Amir-imani, from the Amir-imani/Autonomous-Mobile-Robot repository on GitHub. It is a 2-layer board of 45 × 46 mm with 52 parts on 42 nets, routed with 200 tracks and 32 vias.
It is built around the STM8S003F3P6, TC4428AEOA and AMS1117-3.3, with the SI9945BDY among its other parts. Its parts include 15 capacitors, 14 resistors, 5 connectors, 4 transistors and 3 ICs. It belongs with the robots and motor control boards and the STM8 boards of this library.
Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.
This repository contains the code, electronic design sources, and mechanical models for a differential-drive mobile robot. The software separates time-sensitive low-level control (RP2040), on-board ROS 2 integration (Raspberry Pi 5), and remote vision inference (external compute).
code/
firmware/pico/ RP2040 firmware, drivers, Neuro-PID training
ros2/ Six ROS 2 packages: bridge, model, camera, GPU inference, messages, testbench
experiments/ Source checks, host benchmarks, controlled emulation and analysis
hardware/ KiCad schematics, PCBs and manufacturing outputs
mechanical/ CAD and exported mechanical drawings
results/ Thesis results directory
docs/ Appendix index and architecture guideThe repository contains closed-loop wheel-control firmware, sensor interfaces, a Pico ↔ Pi binary bridge, wheel odometry, LiDAR sample aggregation, robot description, compressed-image publication, a GPU-capable inference node, and experiment tooling. It does not bundle a complete evaluated Nav2/SLAM deployment, a trained ONNX model, or verified physical GPU performance results. Host emulations and software tests must be reported separately from physical measurements.
For final thesis citations, prefer a full commit-SHA URL (a fixed snapshot) instead of a moving main link. A release tag is optional and should only be cited after it actually exists. The repository is private; reviewers need authorized GitHub access.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C5, C9, C11, C12, C15 |
| 4 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R13, R14 |
| 4 | TestPoint_Flag | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4 |
| 3 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9, R10 |
| 3 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J5, J6, J7 |
| 3 | NPN | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4 |
| 2 | 100K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R6 |
| 2 | 10R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 2 | 500mA | Fuse:Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder | F1, F2 |
| 1 | 1000uF/10V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 150uF/10V | Capacitor_SMD:CP_Elec_6.3x5.3 | C6 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 18Pf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 18pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 3*6*4.3 | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | FD | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | LED_RGB | LED_SMD:LED_RGB_5050-6 | D1 |
| 1 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1 |
| 1 | STM8S003F3P | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | Si9945BDY | Package_SO:PowerIntegrations_SO-8 | Q1 |
| 1 | TC4428AEOA | Package_SO:PowerIntegrations_SO-8 | U1 |

Amir-imani/Autonomous-Mobile-Robot
Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.

Amir-imani/Autonomous-Mobile-Robot
Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.

Amir-imani/Autonomous-Mobile-Robot
Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.

Amir-imani/Autonomous-Mobile-Robot
Thesis project: Design and Construction of a Mobile Robot with Intelligent Path Planning in Dynamic Environments.

LTU-RAI/mav_power_protection
Over/Under voltage protection with inrush current limitation


dylanmsu/Ultrasonic_Phased_Array
This repository contains all the sources for a working ultrasonic phased array powered by a ZYNQ FPGA.

dilshan/ir-clone
Open-source infrared remote control signal analysis and generating tool

thatoddmailbox/kvm-base
The main board for the open-source HDMI KVM switch I built.


akuker/SuperUPS
This is a fork of the original Supercapacitor UPS board for a Raspberry Pi by Scott Baker, http://www.smbaker.com/

It measures 45 × 46 mm and has 2 copper layers, 1.6 mm thick.
52 parts, built around the STM8S003F3P6, TC4428AEOA, AMS1117-3.3 and SI9945BDY. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Amir-imani/Autonomous-Mobile-Robot repository on GitHub, at the commit this page was made from: the board is hardware/stm8_fan_controller/source/Fan_robot_V3.kicad_pcb and its schematic hardware/main_power_distribution/source/Input Power_robot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Amir-imani before reusing the design.